Regenerate integrations.js (#18022)
Co-authored-by: ilyam8 <22274335+ilyam8@users.noreply.github.com>
Netdata bot committed
Jun 27, 2024 at 07:39 UTC
391df71a3052a5ca34475ba6978fd4fe0db32ffa
4 files changed
+11
-11
integrations/integrations.js
+3
-3
@@ -5608,7 +5608,7 @@ export const integrations = [
5608
},
5609
"most_popular": false
5610
},
5611
- "overview": "# Ping\n\nPlugin: go.d.plugin\nModule: ping\n\n## Overview\n\nThis module measures round-trip time and packet loss by sending ping messages to network hosts.\n\nThere are two operational modes:\n\n- privileged (send raw ICMP ping, default). Requires\n CAP_NET_RAW [capability](https://man7.org/linux/man-pages/man7/capabilities.7.html) or root privileges:\n > **Note**: set automatically during Netdata installation.\n\n ```bash\n sudo setcap CAP_NET_RAW=eip <INSTALL_PREFIX>/usr/libexec/netdata/plugins.d/go.d.plugin\n ```\n\n- unprivileged (send UDP ping, Linux only).\n Requires configuring [ping_group_range](https://www.man7.org/linux/man-pages/man7/icmp.7.html):\n\n ```bash\n sudo sysctl -w net.ipv4.ping_group_range=\"0 2147483647\"\n ```\n To persist the change add `net.ipv4.ping_group_range=\"0 2147483647\"` to `/etc/sysctl.conf` and\n execute `sudo sysctl -p`.\n\n\n\n\nThis collector is supported on all platforms.\n\nThis collector supports collecting metrics from multiple instances of this integration, including remote instances.\n\n\n### Default Behavior\n\n#### Auto-Detection\n\nThis integration doesn't support auto-detection.\n\n#### Limits\n\nThe default configuration for this integration does not impose any limits on data collection.\n\n#### Performance Impact\n\nThe default configuration for this integration is not expected to impose a significant performance impact on the system.\n",
5611
+ "overview": "# Ping\n\nPlugin: go.d.plugin\nModule: ping\n\n## Overview\n\nThis module measures round-trip time and packet loss by sending ping messages to network hosts.\n\nThere are two operational modes:\n\n- privileged (send raw ICMP ping, default). Requires\n CAP_NET_RAW [capability](https://man7.org/linux/man-pages/man7/capabilities.7.html) or root privileges:\n > **Note**: set automatically during Netdata installation.\n\n ```bash\n sudo setcap CAP_NET_RAW=eip <INSTALL_PREFIX>/usr/libexec/netdata/plugins.d/go.d.plugin\n ```\n\n- unprivileged (send UDP ping, Linux only).\n Requires configuring [ping_group_range](https://www.man7.org/linux/man-pages/man7/icmp.7.html):\n\n ```bash\n sudo sysctl -w net.ipv4.ping_group_range=\"0 2147483647\"\n ```\n To persist the change add `net.ipv4.ping_group_range=0 2147483647` to `/etc/sysctl.conf` and\n execute `sudo sysctl -p`.\n\n\n\n\nThis collector is supported on all platforms.\n\nThis collector supports collecting metrics from multiple instances of this integration, including remote instances.\n\n\n### Default Behavior\n\n#### Auto-Detection\n\nThis integration doesn't support auto-detection.\n\n#### Limits\n\nThe default configuration for this integration does not impose any limits on data collection.\n\n#### Performance Impact\n\nThe default configuration for this integration is not expected to impose a significant performance impact on the system.\n",
5612
"setup": "## Setup\n\n### Prerequisites\n\nNo action required.\n\n### Configuration\n\n#### File\n\nThe configuration file name for this integration is `go.d/ping.conf`.\n\n\nYou can edit the configuration file using the `edit-config` script from the\nNetdata [config directory](/docs/netdata-agent/configuration/README.md#the-netdata-config-directory).\n\n```bash\ncd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata\nsudo ./edit-config go.d/ping.conf\n```\n#### Options\n\nThe following options can be defined globally: update_every, autodetection_retry.\n\n\n{% details open=true summary=\"Config options\" %}\n| Name | Description | Default | Required |\n|:----|:-----------|:-------|:--------:|\n| update_every | Data collection frequency. | 5 | no |\n| autodetection_retry | Recheck interval in seconds. Zero means no recheck will be scheduled. | 0 | no |\n| hosts | Network hosts. | | yes |\n| network | Allows configuration of DNS resolution. Supported options: ip (select IPv4 or IPv6), ip4 (select IPv4), ip6 (select IPv6). | ip | no |\n| privileged | Ping packets type. \"no\" means send an \"unprivileged\" UDP ping, \"yes\" - raw ICMP ping. | yes | no |\n| packets | Number of ping packets to send. | 5 | no |\n| interval | Timeout between sending ping packets. | 100ms | no |\n\n{% /details %}\n#### Examples\n\n##### IPv4 hosts\n\nAn example configuration.\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: example\n hosts:\n - 192.0.2.0\n - 192.0.2.1\n\n```\n{% /details %}\n##### Unprivileged mode\n\nAn example configuration.\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: example\n privileged: no\n hosts:\n - 192.0.2.0\n - 192.0.2.1\n\n```\n{% /details %}\n##### Multi-instance\n\n> **Note**: When you define multiple jobs, their names must be unique.\n\nMultiple instances.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: example1\n hosts:\n - 192.0.2.0\n - 192.0.2.1\n\n - name: example2\n packets: 10\n hosts:\n - 192.0.2.3\n - 192.0.2.4\n\n```\n{% /details %}\n",
5613
"troubleshooting": "## Troubleshooting\n\n### Debug Mode\n\nTo troubleshoot issues with the `ping` collector, run the `go.d.plugin` with the debug option enabled. The output\nshould give you clues as to why the collector isn't working.\n\n- Navigate to the `plugins.d` directory, usually at `/usr/libexec/netdata/plugins.d/`. If that's not the case on\n your system, open `netdata.conf` and look for the `plugins` setting under `[directories]`.\n\n ```bash\n cd /usr/libexec/netdata/plugins.d/\n ```\n\n- Switch to the `netdata` user.\n\n ```bash\n sudo -u netdata -s\n ```\n\n- Run the `go.d.plugin` to debug the collector:\n\n ```bash\n ./go.d.plugin -d -m ping\n ```\n\n### Getting Logs\n\nIf you're encountering problems with the `ping` collector, follow these steps to retrieve logs and identify potential issues:\n\n- **Run the command** specific to your system (systemd, non-systemd, or Docker container).\n- **Examine the output** for any warnings or error messages that might indicate issues. These messages should provide clues about the root cause of the problem.\n\n#### System with systemd\n\nUse the following command to view logs generated since the last Netdata service restart:\n\n```bash\njournalctl _SYSTEMD_INVOCATION_ID=\"$(systemctl show --value --property=InvocationID netdata)\" --namespace=netdata --grep ping\n```\n\n#### System without systemd\n\nLocate the collector log file, typically at `/var/log/netdata/collector.log`, and use `grep` to filter for collector's name:\n\n```bash\ngrep ping /var/log/netdata/collector.log\n```\n\n**Note**: This method shows logs from all restarts. Focus on the **latest entries** for troubleshooting current issues.\n\n#### Docker Container\n\nIf your Netdata runs in a Docker container named \"netdata\" (replace if different), use this command:\n\n```bash\ndocker logs netdata 2>&1 | grep ping\n```\n\n",
5614
"alerts": "## Alerts\n\n\nThe following alerts are available:\n\n| Alert name | On metric | Description |\n|:------------|:----------|:------------|\n| [ ping_host_reachable ](https://github.com/netdata/netdata/blob/master/src/health/health.d/ping.conf) | ping.host_packet_loss | network host ${lab1el:host} reachability status |\n| [ ping_packet_loss ](https://github.com/netdata/netdata/blob/master/src/health/health.d/ping.conf) | ping.host_packet_loss | packet loss percentage to the network host ${label:host} over the last 10 minutes |\n| [ ping_host_latency ](https://github.com/netdata/netdata/blob/master/src/health/health.d/ping.conf) | ping.host_rtt | average latency to the network host ${label:host} over the last 10 seconds |\n",
@@ -16027,8 +16027,8 @@ export const integrations = [
16027
},
16028
"most_popular": true
16029
},
16030
- "overview": "# SNMP devices\n\nPlugin: go.d.plugin\nModule: snmp\n\n## Overview\n\nThis SNMP collector discovers and gathers statistics for network interfaces on SNMP-enabled devices:\n\n- Traffic\n- Packets (unicast, multicast, broadcast)\n- Errors\n- Discards\n- Administrative and operational status\n\nAdditionally, it collects overall device uptime.\n\nIt is compatible with all SNMP versions (v1, v2c, and v3) and uses the [gosnmp](https://github.com/gosnmp/gosnmp) package.\n\n**For advanced users**:\n\n- You can manually specify custom OIDs (Object Identifiers) to retrieve specific data points beyond the default metrics.\n- However, defining custom charts with dimensions for these OIDs requires manual configuration.\n\n\n\n\nThis collector is supported on all platforms.\n\nThis collector supports collecting metrics from multiple instances of this integration, including remote instances.\n\n\n### Default Behavior\n\n#### Auto-Detection\n\nThis integration doesn't support auto-detection.\n\n#### Limits\n\nThe default configuration for this integration does not impose any limits on data collection.\n\n#### Performance Impact\n\n**Performance Considerations**:\n\n- **Device limitations**: Many SNMP switches and routers have limited processing power. They might not be able to report data as frequently as desired. You can monitor response times using go.d.plugin in debug mode to identify potential bottlenecks.\n\n- **Concurrent access**: If multiple collectors or tools access the same SNMP device simultaneously, data points might be skipped. This is a limitation of the device itself, not this collector. To mitigate this, consider increasing the collection interval (update_every) to reduce the frequency of requests.\n\n",
16031
- "setup": "## Setup\n\n### Prerequisites\n\nNo action required.\n\n### Configuration\n\n#### File\n\nThe configuration file name for this integration is `go.d/snmp.conf`.\n\n\nYou can edit the configuration file using the `edit-config` script from the\nNetdata [config directory](/docs/netdata-agent/configuration/README.md#the-netdata-config-directory).\n\n```bash\ncd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata\nsudo ./edit-config go.d/snmp.conf\n```\n#### Options\n\nThe following options can be defined globally: update_every, autodetection_retry.\n\n\n{% details open=true summary=\"Config options\" %}\n| Name | Description | Default | Required |\n|:----|:-----------|:-------|:--------:|\n| update_every | Data collection frequency. | 10 | no |\n| autodetection_retry | Recheck interval in seconds. Zero means no recheck will be scheduled. | 0 | no |\n| hostname | Target ipv4 address. | | yes |\n| community | SNMPv1/2 community string. | public | no |\n| options.version | SNMP version. Available versions: 1, 2, 3. | 2 | no |\n| options.port | Target port. | 161 | no |\n| options.retries | Retries to attempt. | 1 | no |\n| options.timeout | SNMP request/response timeout. | 5 | no |\n| options.max_repetitions | Controls how many SNMP variables to retrieve in a single GETBULK request. | 25 | no |\n| options.max_request_size | Maximum number of OIDs allowed in a single GET request. | 60 | no |\n| user.name | SNMPv3 user name. | | no |\n| user.name | Security level of SNMPv3 messages. | | no |\n| user.auth_proto | Security level of SNMPv3 messages. | | no |\n| user.name | Authentication protocol for SNMPv3 messages. | | no |\n| user.auth_key | Authentication protocol pass phrase. | | no |\n| user.priv_proto | Privacy protocol for SNMPv3 messages. | | no |\n| user.priv_key | Privacy protocol pass phrase. | | no |\n| charts | List of charts. | [] | yes |\n| charts.id | Chart ID. Used to uniquely identify the chart. | | yes |\n| charts.title | Chart title. | Untitled chart | no |\n| charts.units | Chart units. | num | no |\n| charts.family | Chart family. | charts.id | no |\n| charts.type | Chart type (line, area, stacked). | line | no |\n| charts.priority | Chart priority. | 70000 | no |\n| charts.multiply_range | Used when you need to define many charts using incremental OIDs. | [] | no |\n| charts.dimensions | List of chart dimensions. | [] | yes |\n| charts.dimensions.oid | Collected metric OID. | | yes |\n| charts.dimensions.name | Dimension name. | | yes |\n| charts.dimensions.algorithm | Dimension algorithm (absolute, incremental). | absolute | no |\n| charts.dimensions.multiplier | Collected value multiplier, applied to convert it properly to units. | 1 | no |\n| charts.dimensions.divisor | Collected value divisor, applied to convert it properly to units. | 1 | no |\n\n##### user.auth_proto\n\nThe security of an SNMPv3 message as per RFC 3414 (`user.level`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|------------------------------------------|\n| none | 1 | no message authentication or encryption |\n| authNoPriv | 2 | message authentication and no encryption |\n| authPriv | 3 | message authentication and encryption |\n\n\n##### user.name\n\nThe digest algorithm for SNMPv3 messages that require authentication (`user.auth_proto`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|-------------------------------------------|\n| none | 1 | no message authentication |\n| md5 | 2 | MD5 message authentication (HMAC-MD5-96) |\n| sha | 3 | SHA message authentication (HMAC-SHA-96) |\n| sha224 | 4 | SHA message authentication (HMAC-SHA-224) |\n| sha256 | 5 | SHA message authentication (HMAC-SHA-256) |\n| sha384 | 6 | SHA message authentication (HMAC-SHA-384) |\n| sha512 | 7 | SHA message authentication (HMAC-SHA-512) |\n\n\n##### user.priv_proto\n\nThe encryption algorithm for SNMPv3 messages that require privacy (`user.priv_proto`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|-------------------------------------------------------------------------|\n| none | 1 | no message encryption |\n| des | 2 | ES encryption (CBC-DES) |\n| aes | 3 | 128-bit AES encryption (CFB-AES-128) |\n| aes192 | 4 | 192-bit AES encryption (CFB-AES-192) with \"Blumenthal\" key localization |\n| aes256 | 5 | 256-bit AES encryption (CFB-AES-256) with \"Blumenthal\" key localization |\n| aes192c | 6 | 192-bit AES encryption (CFB-AES-192) with \"Reeder\" key localization |\n| aes256c | 7 | 256-bit AES encryption (CFB-AES-256) with \"Reeder\" key localization |\n\n\n{% /details %}\n#### Examples\n\n##### SNMPv1/2\n\nIn this example:\n\n- the SNMP device is `192.0.2.1`.\n- the SNMP version is `2`.\n- the SNMP community is `public`.\n- we will update the values every 10 seconds.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n community: public\n options:\n version: 2\n\n```\n{% /details %}\n##### SNMPv3\n\nTo use SNMPv3:\n\n- use `user` instead of `community`.\n- set `options.version` to 3.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n options:\n version: 3\n user:\n name: username\n level: authPriv\n auth_proto: sha256\n auth_key: auth_protocol_passphrase\n priv_proto: aes256\n priv_key: priv_protocol_passphrase\n\n```\n{% /details %}\n##### Custom OIDs\n\nIn this example:\n\n- the SNMP device is `192.0.2.1`.\n- the SNMP version is `2`.\n- the SNMP community is `public`.\n- we will update the values every 10 seconds.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port1\"\n title: \"Switch Bandwidth for port 1\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.1\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.1\"\n multiplier: -8\n divisor: 1000\n - id: \"bandwidth_port2\"\n title: \"Switch Bandwidth for port 2\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.2\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.2\"\n multiplier: -8\n divisor: 1000\n\n```\n{% /details %}\n##### Custom OIDs with multiply range\n\nIf you need to define many charts using incremental OIDs, you can use the `charts.multiply_range` option.\n\nThis is like the SNMPv1/2 example, but the option will multiply the current chart from 1 to 24 inclusive, producing 24 charts in total for the 24 ports of the switch `192.0.2.1`.\n\nEach of the 24 new charts will have its id (1-24) appended at:\n\n- its chart unique `id`, i.e. `bandwidth_port_1` to `bandwidth_port_24`.\n- its title, i.e. `Switch Bandwidth for port 1` to `Switch Bandwidth for port 24`.\n- its `oid` (for all dimensions), i.e. dimension in will be `1.3.6.1.2.1.2.2.1.10.1` to `1.3.6.1.2.1.2.2.1.10.24`.\n- its `priority` will be incremented for each chart so that the charts will appear on the dashboard in this order.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: \"192.0.2.1\"\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port\"\n title: \"Switch Bandwidth for port\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n multiply_range: [1, 24]\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16\"\n multiplier: -8\n divisor: 1000\n\n```\n{% /details %}\n##### Multiple devices with a common configuration\n\nYAML supports [anchors](https://yaml.org/spec/1.2.2/#3222-anchors-and-aliases). \nThe `&` defines and names an anchor, and the `*` uses it. `<<: *anchor` means, inject the anchor, then extend. We can use anchors to share the common configuration for multiple devices.\n\nThe following example:\n\n- adds an `anchor` to the first job.\n- injects (copies) the first job configuration to the second and updates `name` and `hostname` parameters.\n- injects (copies) the first job configuration to the third and updates `name` and `hostname` parameters.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - &anchor\n name: switch\n update_every: 10\n hostname: \"192.0.2.1\"\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port1\"\n title: \"Switch Bandwidth for port 1\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.1\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.1\"\n multiplier: -8\n divisor: 1000\n - <<: *anchor\n name: switch2\n hostname: \"192.0.2.2\"\n - <<: *anchor\n name: switch3\n hostname: \"192.0.2.3\"\n\n```\n{% /details %}\n",
16030
+ "overview": "# SNMP devices\n\nPlugin: go.d.plugin\nModule: snmp\n\n## Overview\n\nThis SNMP collector discovers and gathers statistics for network interfaces on SNMP-enabled devices:\n\n- Traffic\n- Packets (unicast, multicast, broadcast)\n- Errors\n- Discards\n- Administrative and operational status\n\nAdditionally, it collects overall device uptime.\n\nIt is compatible with all SNMP versions (v1, v2c, and v3) and uses the [gosnmp](https://github.com/gosnmp/gosnmp) package.\n\n**For advanced users**:\n\n- You can manually specify custom OIDs (Object Identifiers) to retrieve specific data points beyond the default metrics.\n- However, defining custom charts with dimensions for these OIDs requires manual configuration.\n\n\n\n\nThis collector is supported on all platforms.\n\nThis collector supports collecting metrics from multiple instances of this integration, including remote instances.\n\n\n### Default Behavior\n\n#### Auto-Detection\n\nThis integration doesn't support auto-detection.\n\n#### Limits\n\nThe default configuration for this integration does not impose any limits on data collection.\n\n#### Performance Impact\n\n**Device limitations**: Many SNMP switches and routers have limited processing power. They might not be able to report data as frequently as desired. You can monitor response times using go.d.plugin in debug mode to identify potential bottlenecks.\n\n**Concurrent access**: If multiple collectors or tools access the same SNMP device simultaneously, data points might be skipped. This is a limitation of the device itself, not this collector. To mitigate this, consider increasing the collection interval (update_every) to reduce the frequency of requests.\n\n",
16031
+ "setup": "## Setup\n\n### Prerequisites\n\nNo action required.\n\n### Configuration\n\n#### File\n\nThe configuration file name for this integration is `go.d/snmp.conf`.\n\n\nYou can edit the configuration file using the `edit-config` script from the\nNetdata [config directory](/docs/netdata-agent/configuration/README.md#the-netdata-config-directory).\n\n```bash\ncd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata\nsudo ./edit-config go.d/snmp.conf\n```\n#### Options\n\nThe following options can be defined globally: update_every, autodetection_retry.\n\n\n{% details open=true summary=\"Config options\" %}\n| Name | Description | Default | Required |\n|:----|:-----------|:-------|:--------:|\n| update_every | Data collection frequency. | 10 | no |\n| autodetection_retry | Recheck interval in seconds. Zero means no recheck will be scheduled. | 0 | no |\n| hostname | Target ipv4 address. | | yes |\n| community | SNMPv1/2 community string. | public | no |\n| options.version | SNMP version. Available versions: 1, 2, 3. | 2 | no |\n| options.port | Target port. | 161 | no |\n| options.retries | Retries to attempt. | 1 | no |\n| options.timeout | SNMP request/response timeout. | 5 | no |\n| options.max_repetitions | Controls how many SNMP variables to retrieve in a single GETBULK request. | 25 | no |\n| options.max_request_size | Maximum number of OIDs allowed in a single GET request. | 60 | no |\n| network_interface_filter.by_name | Filter interfaces by their names using [simple patterns](/src/libnetdata/simple_pattern/README.md#simple-patterns). | | no |\n| network_interface_filter.by_type | Filter interfaces by their types using [simple patterns](/src/libnetdata/simple_pattern/README.md#simple-patterns). | | no |\n| user.name | SNMPv3 user name. | | no |\n| user.name | Security level of SNMPv3 messages. | | no |\n| user.auth_proto | Security level of SNMPv3 messages. | | no |\n| user.name | Authentication protocol for SNMPv3 messages. | | no |\n| user.auth_key | Authentication protocol pass phrase. | | no |\n| user.priv_proto | Privacy protocol for SNMPv3 messages. | | no |\n| user.priv_key | Privacy protocol pass phrase. | | no |\n| charts | List of charts. | [] | yes |\n| charts.id | Chart ID. Used to uniquely identify the chart. | | yes |\n| charts.title | Chart title. | Untitled chart | no |\n| charts.units | Chart units. | num | no |\n| charts.family | Chart family. | charts.id | no |\n| charts.type | Chart type (line, area, stacked). | line | no |\n| charts.priority | Chart priority. | 70000 | no |\n| charts.multiply_range | Used when you need to define many charts using incremental OIDs. | [] | no |\n| charts.dimensions | List of chart dimensions. | [] | yes |\n| charts.dimensions.oid | Collected metric OID. | | yes |\n| charts.dimensions.name | Dimension name. | | yes |\n| charts.dimensions.algorithm | Dimension algorithm (absolute, incremental). | absolute | no |\n| charts.dimensions.multiplier | Collected value multiplier, applied to convert it properly to units. | 1 | no |\n| charts.dimensions.divisor | Collected value divisor, applied to convert it properly to units. | 1 | no |\n\n##### user.auth_proto\n\nThe security of an SNMPv3 message as per RFC 3414 (`user.level`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|------------------------------------------|\n| none | 1 | no message authentication or encryption |\n| authNoPriv | 2 | message authentication and no encryption |\n| authPriv | 3 | message authentication and encryption |\n\n\n##### user.name\n\nThe digest algorithm for SNMPv3 messages that require authentication (`user.auth_proto`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|-------------------------------------------|\n| none | 1 | no message authentication |\n| md5 | 2 | MD5 message authentication (HMAC-MD5-96) |\n| sha | 3 | SHA message authentication (HMAC-SHA-96) |\n| sha224 | 4 | SHA message authentication (HMAC-SHA-224) |\n| sha256 | 5 | SHA message authentication (HMAC-SHA-256) |\n| sha384 | 6 | SHA message authentication (HMAC-SHA-384) |\n| sha512 | 7 | SHA message authentication (HMAC-SHA-512) |\n\n\n##### user.priv_proto\n\nThe encryption algorithm for SNMPv3 messages that require privacy (`user.priv_proto`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|-------------------------------------------------------------------------|\n| none | 1 | no message encryption |\n| des | 2 | ES encryption (CBC-DES) |\n| aes | 3 | 128-bit AES encryption (CFB-AES-128) |\n| aes192 | 4 | 192-bit AES encryption (CFB-AES-192) with \"Blumenthal\" key localization |\n| aes256 | 5 | 256-bit AES encryption (CFB-AES-256) with \"Blumenthal\" key localization |\n| aes192c | 6 | 192-bit AES encryption (CFB-AES-192) with \"Reeder\" key localization |\n| aes256c | 7 | 256-bit AES encryption (CFB-AES-256) with \"Reeder\" key localization |\n\n\n{% /details %}\n#### Examples\n\n##### SNMPv1/2\n\nIn this example:\n\n- the SNMP device is `192.0.2.1`.\n- the SNMP version is `2`.\n- the SNMP community is `public`.\n- we will update the values every 10 seconds.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n community: public\n options:\n version: 2\n\n```\n{% /details %}\n##### SNMPv3\n\nTo use SNMPv3:\n\n- use `user` instead of `community`.\n- set `options.version` to 3.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n options:\n version: 3\n user:\n name: username\n level: authPriv\n auth_proto: sha256\n auth_key: auth_protocol_passphrase\n priv_proto: aes256\n priv_key: priv_protocol_passphrase\n\n```\n{% /details %}\n##### Custom OIDs\n\nIn this example:\n\n- the SNMP device is `192.0.2.1`.\n- the SNMP version is `2`.\n- the SNMP community is `public`.\n- we will update the values every 10 seconds.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port1\"\n title: \"Switch Bandwidth for port 1\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.1\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.1\"\n multiplier: -8\n divisor: 1000\n - id: \"bandwidth_port2\"\n title: \"Switch Bandwidth for port 2\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.2\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.2\"\n multiplier: -8\n divisor: 1000\n\n```\n{% /details %}\n##### Custom OIDs with multiply range\n\nIf you need to define many charts using incremental OIDs, you can use the `charts.multiply_range` option.\n\nThis is like the SNMPv1/2 example, but the option will multiply the current chart from 1 to 24 inclusive, producing 24 charts in total for the 24 ports of the switch `192.0.2.1`.\n\nEach of the 24 new charts will have its id (1-24) appended at:\n\n- its chart unique `id`, i.e. `bandwidth_port_1` to `bandwidth_port_24`.\n- its title, i.e. `Switch Bandwidth for port 1` to `Switch Bandwidth for port 24`.\n- its `oid` (for all dimensions), i.e. dimension in will be `1.3.6.1.2.1.2.2.1.10.1` to `1.3.6.1.2.1.2.2.1.10.24`.\n- its `priority` will be incremented for each chart so that the charts will appear on the dashboard in this order.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: \"192.0.2.1\"\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port\"\n title: \"Switch Bandwidth for port\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n multiply_range: [1, 24]\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16\"\n multiplier: -8\n divisor: 1000\n\n```\n{% /details %}\n##### Multiple devices with a common configuration\n\nYAML supports [anchors](https://yaml.org/spec/1.2.2/#3222-anchors-and-aliases). \nThe `&` defines and names an anchor, and the `*` uses it. `<<: *anchor` means, inject the anchor, then extend. We can use anchors to share the common configuration for multiple devices.\n\nThe following example:\n\n- adds an `anchor` to the first job.\n- injects (copies) the first job configuration to the second and updates `name` and `hostname` parameters.\n- injects (copies) the first job configuration to the third and updates `name` and `hostname` parameters.\n\n\n{% details open=true summary=\"Config\" %}\n```yaml\njobs:\n - &anchor\n name: switch\n update_every: 10\n hostname: \"192.0.2.1\"\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port1\"\n title: \"Switch Bandwidth for port 1\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.1\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.1\"\n multiplier: -8\n divisor: 1000\n - <<: *anchor\n name: switch2\n hostname: \"192.0.2.2\"\n - <<: *anchor\n name: switch3\n hostname: \"192.0.2.3\"\n\n```\n{% /details %}\n",
16032
"troubleshooting": "## Troubleshooting\n\n### Debug Mode\n\nTo troubleshoot issues with the `snmp` collector, run the `go.d.plugin` with the debug option enabled. The output\nshould give you clues as to why the collector isn't working.\n\n- Navigate to the `plugins.d` directory, usually at `/usr/libexec/netdata/plugins.d/`. If that's not the case on\n your system, open `netdata.conf` and look for the `plugins` setting under `[directories]`.\n\n ```bash\n cd /usr/libexec/netdata/plugins.d/\n ```\n\n- Switch to the `netdata` user.\n\n ```bash\n sudo -u netdata -s\n ```\n\n- Run the `go.d.plugin` to debug the collector:\n\n ```bash\n ./go.d.plugin -d -m snmp\n ```\n\n### Getting Logs\n\nIf you're encountering problems with the `snmp` collector, follow these steps to retrieve logs and identify potential issues:\n\n- **Run the command** specific to your system (systemd, non-systemd, or Docker container).\n- **Examine the output** for any warnings or error messages that might indicate issues. These messages should provide clues about the root cause of the problem.\n\n#### System with systemd\n\nUse the following command to view logs generated since the last Netdata service restart:\n\n```bash\njournalctl _SYSTEMD_INVOCATION_ID=\"$(systemctl show --value --property=InvocationID netdata)\" --namespace=netdata --grep snmp\n```\n\n#### System without systemd\n\nLocate the collector log file, typically at `/var/log/netdata/collector.log`, and use `grep` to filter for collector's name:\n\n```bash\ngrep snmp /var/log/netdata/collector.log\n```\n\n**Note**: This method shows logs from all restarts. Focus on the **latest entries** for troubleshooting current issues.\n\n#### Docker Container\n\nIf your Netdata runs in a Docker container named \"netdata\" (replace if different), use this command:\n\n```bash\ndocker logs netdata 2>&1 | grep snmp\n```\n\n",
16033
"alerts": "## Alerts\n\nThere are no alerts configured by default for this integration.\n",
16034
"metrics": "## Metrics\n\nMetrics grouped by *scope*.\n\nThe scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels.\n\nThe metrics that will be collected are defined in the configuration file.\n\n### Per snmp device\n\nThese metrics refer to the SNMP device.\n\nLabels:\n\n| Label | Description |\n|:-----------|:----------------|\n| sysName | SNMP device's system name (OID: [1.3.6.1.2.1.1.5](https://oidref.com/1.3.6.1.2.1.1.5)). |\n\nMetrics:\n\n| Metric | Dimensions | Unit |\n|:------|:----------|:----|\n| snmp.device_uptime | uptime | seconds |\n\n### Per network interface\n\nNetwork interfaces of the SNMP device being monitored. These metrics refer to each interface.\n\nLabels:\n\n| Label | Description |\n|:-----------|:----------------|\n| sysName | SNMP device's system name (OID: [1.3.6.1.2.1.1.5](https://oidref.com/1.3.6.1.2.1.1.5)). |\n| ifDescr | Network interface description (OID: [1.3.6.1.2.1.2.2.1.2](https://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?oid=1.3.6.1.2.1.2.2.1.2)). |\n| ifName | Network interface name (OID: [1.3.6.1.2.1.2.2.1.2](https://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?oid=1.3.6.1.2.1.31.1.1.1.1)). |\n| ifType | Network interface type (OID: [1.3.6.1.2.1.2.2.1.2](https://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?oid=1.3.6.1.2.1.2.2.1.3)). |\n\nMetrics:\n\n| Metric | Dimensions | Unit |\n|:------|:----------|:----|\n| snmp.device_net_interface_traffic | received, sent | kilobits/s |\n| snmp.device_net_interface_unicast | received, sent | packets/s |\n| snmp.device_net_interface_multicast | received, sent | packets/s |\n| snmp.device_net_interface_broadcast | received, sent | packets/s |\n| snmp.device_net_interface_errors | inbound, outbound | errors/s |\n| snmp.device_net_interface_discards | inbound, outbound | discards/s |\n| snmp.device_net_interface_admin_status | up, down, testing | status |\n| snmp.device_net_interface_oper_status | up, down, testing, unknown, dormant, not_present, lower_layer_down | status |\n\n",
integrations/integrations.json
+3
-3
@@ -5606,7 +5606,7 @@
5606
},
5607
"most_popular": false
5608
},
5609
- "overview": "# Ping\n\nPlugin: go.d.plugin\nModule: ping\n\n## Overview\n\nThis module measures round-trip time and packet loss by sending ping messages to network hosts.\n\nThere are two operational modes:\n\n- privileged (send raw ICMP ping, default). Requires\n CAP_NET_RAW [capability](https://man7.org/linux/man-pages/man7/capabilities.7.html) or root privileges:\n > **Note**: set automatically during Netdata installation.\n\n ```bash\n sudo setcap CAP_NET_RAW=eip <INSTALL_PREFIX>/usr/libexec/netdata/plugins.d/go.d.plugin\n ```\n\n- unprivileged (send UDP ping, Linux only).\n Requires configuring [ping_group_range](https://www.man7.org/linux/man-pages/man7/icmp.7.html):\n\n ```bash\n sudo sysctl -w net.ipv4.ping_group_range=\"0 2147483647\"\n ```\n To persist the change add `net.ipv4.ping_group_range=\"0 2147483647\"` to `/etc/sysctl.conf` and\n execute `sudo sysctl -p`.\n\n\n\n\nThis collector is supported on all platforms.\n\nThis collector supports collecting metrics from multiple instances of this integration, including remote instances.\n\n\n### Default Behavior\n\n#### Auto-Detection\n\nThis integration doesn't support auto-detection.\n\n#### Limits\n\nThe default configuration for this integration does not impose any limits on data collection.\n\n#### Performance Impact\n\nThe default configuration for this integration is not expected to impose a significant performance impact on the system.\n",
5609
+ "overview": "# Ping\n\nPlugin: go.d.plugin\nModule: ping\n\n## Overview\n\nThis module measures round-trip time and packet loss by sending ping messages to network hosts.\n\nThere are two operational modes:\n\n- privileged (send raw ICMP ping, default). Requires\n CAP_NET_RAW [capability](https://man7.org/linux/man-pages/man7/capabilities.7.html) or root privileges:\n > **Note**: set automatically during Netdata installation.\n\n ```bash\n sudo setcap CAP_NET_RAW=eip <INSTALL_PREFIX>/usr/libexec/netdata/plugins.d/go.d.plugin\n ```\n\n- unprivileged (send UDP ping, Linux only).\n Requires configuring [ping_group_range](https://www.man7.org/linux/man-pages/man7/icmp.7.html):\n\n ```bash\n sudo sysctl -w net.ipv4.ping_group_range=\"0 2147483647\"\n ```\n To persist the change add `net.ipv4.ping_group_range=0 2147483647` to `/etc/sysctl.conf` and\n execute `sudo sysctl -p`.\n\n\n\n\nThis collector is supported on all platforms.\n\nThis collector supports collecting metrics from multiple instances of this integration, including remote instances.\n\n\n### Default Behavior\n\n#### Auto-Detection\n\nThis integration doesn't support auto-detection.\n\n#### Limits\n\nThe default configuration for this integration does not impose any limits on data collection.\n\n#### Performance Impact\n\nThe default configuration for this integration is not expected to impose a significant performance impact on the system.\n",
5610
"setup": "## Setup\n\n### Prerequisites\n\nNo action required.\n\n### Configuration\n\n#### File\n\nThe configuration file name for this integration is `go.d/ping.conf`.\n\n\nYou can edit the configuration file using the `edit-config` script from the\nNetdata [config directory](/docs/netdata-agent/configuration/README.md#the-netdata-config-directory).\n\n```bash\ncd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata\nsudo ./edit-config go.d/ping.conf\n```\n#### Options\n\nThe following options can be defined globally: update_every, autodetection_retry.\n\n\n| Name | Description | Default | Required |\n|:----|:-----------|:-------|:--------:|\n| update_every | Data collection frequency. | 5 | no |\n| autodetection_retry | Recheck interval in seconds. Zero means no recheck will be scheduled. | 0 | no |\n| hosts | Network hosts. | | yes |\n| network | Allows configuration of DNS resolution. Supported options: ip (select IPv4 or IPv6), ip4 (select IPv4), ip6 (select IPv6). | ip | no |\n| privileged | Ping packets type. \"no\" means send an \"unprivileged\" UDP ping, \"yes\" - raw ICMP ping. | yes | no |\n| packets | Number of ping packets to send. | 5 | no |\n| interval | Timeout between sending ping packets. | 100ms | no |\n\n#### Examples\n\n##### IPv4 hosts\n\nAn example configuration.\n\n```yaml\njobs:\n - name: example\n hosts:\n - 192.0.2.0\n - 192.0.2.1\n\n```\n##### Unprivileged mode\n\nAn example configuration.\n\n```yaml\njobs:\n - name: example\n privileged: no\n hosts:\n - 192.0.2.0\n - 192.0.2.1\n\n```\n##### Multi-instance\n\n> **Note**: When you define multiple jobs, their names must be unique.\n\nMultiple instances.\n\n\n```yaml\njobs:\n - name: example1\n hosts:\n - 192.0.2.0\n - 192.0.2.1\n\n - name: example2\n packets: 10\n hosts:\n - 192.0.2.3\n - 192.0.2.4\n\n```\n",
5611
"troubleshooting": "## Troubleshooting\n\n### Debug Mode\n\nTo troubleshoot issues with the `ping` collector, run the `go.d.plugin` with the debug option enabled. The output\nshould give you clues as to why the collector isn't working.\n\n- Navigate to the `plugins.d` directory, usually at `/usr/libexec/netdata/plugins.d/`. If that's not the case on\n your system, open `netdata.conf` and look for the `plugins` setting under `[directories]`.\n\n ```bash\n cd /usr/libexec/netdata/plugins.d/\n ```\n\n- Switch to the `netdata` user.\n\n ```bash\n sudo -u netdata -s\n ```\n\n- Run the `go.d.plugin` to debug the collector:\n\n ```bash\n ./go.d.plugin -d -m ping\n ```\n\n### Getting Logs\n\nIf you're encountering problems with the `ping` collector, follow these steps to retrieve logs and identify potential issues:\n\n- **Run the command** specific to your system (systemd, non-systemd, or Docker container).\n- **Examine the output** for any warnings or error messages that might indicate issues. These messages should provide clues about the root cause of the problem.\n\n#### System with systemd\n\nUse the following command to view logs generated since the last Netdata service restart:\n\n```bash\njournalctl _SYSTEMD_INVOCATION_ID=\"$(systemctl show --value --property=InvocationID netdata)\" --namespace=netdata --grep ping\n```\n\n#### System without systemd\n\nLocate the collector log file, typically at `/var/log/netdata/collector.log`, and use `grep` to filter for collector's name:\n\n```bash\ngrep ping /var/log/netdata/collector.log\n```\n\n**Note**: This method shows logs from all restarts. Focus on the **latest entries** for troubleshooting current issues.\n\n#### Docker Container\n\nIf your Netdata runs in a Docker container named \"netdata\" (replace if different), use this command:\n\n```bash\ndocker logs netdata 2>&1 | grep ping\n```\n\n",
5612
"alerts": "## Alerts\n\n\nThe following alerts are available:\n\n| Alert name | On metric | Description |\n|:------------|:----------|:------------|\n| [ ping_host_reachable ](https://github.com/netdata/netdata/blob/master/src/health/health.d/ping.conf) | ping.host_packet_loss | network host ${lab1el:host} reachability status |\n| [ ping_packet_loss ](https://github.com/netdata/netdata/blob/master/src/health/health.d/ping.conf) | ping.host_packet_loss | packet loss percentage to the network host ${label:host} over the last 10 minutes |\n| [ ping_host_latency ](https://github.com/netdata/netdata/blob/master/src/health/health.d/ping.conf) | ping.host_rtt | average latency to the network host ${label:host} over the last 10 seconds |\n",
@@ -16025,8 +16025,8 @@
16025
},
16026
"most_popular": true
16027
},
16028
- "overview": "# SNMP devices\n\nPlugin: go.d.plugin\nModule: snmp\n\n## Overview\n\nThis SNMP collector discovers and gathers statistics for network interfaces on SNMP-enabled devices:\n\n- Traffic\n- Packets (unicast, multicast, broadcast)\n- Errors\n- Discards\n- Administrative and operational status\n\nAdditionally, it collects overall device uptime.\n\nIt is compatible with all SNMP versions (v1, v2c, and v3) and uses the [gosnmp](https://github.com/gosnmp/gosnmp) package.\n\n**For advanced users**:\n\n- You can manually specify custom OIDs (Object Identifiers) to retrieve specific data points beyond the default metrics.\n- However, defining custom charts with dimensions for these OIDs requires manual configuration.\n\n\n\n\nThis collector is supported on all platforms.\n\nThis collector supports collecting metrics from multiple instances of this integration, including remote instances.\n\n\n### Default Behavior\n\n#### Auto-Detection\n\nThis integration doesn't support auto-detection.\n\n#### Limits\n\nThe default configuration for this integration does not impose any limits on data collection.\n\n#### Performance Impact\n\n**Performance Considerations**:\n\n- **Device limitations**: Many SNMP switches and routers have limited processing power. They might not be able to report data as frequently as desired. You can monitor response times using go.d.plugin in debug mode to identify potential bottlenecks.\n\n- **Concurrent access**: If multiple collectors or tools access the same SNMP device simultaneously, data points might be skipped. This is a limitation of the device itself, not this collector. To mitigate this, consider increasing the collection interval (update_every) to reduce the frequency of requests.\n\n",
16029
- "setup": "## Setup\n\n### Prerequisites\n\nNo action required.\n\n### Configuration\n\n#### File\n\nThe configuration file name for this integration is `go.d/snmp.conf`.\n\n\nYou can edit the configuration file using the `edit-config` script from the\nNetdata [config directory](/docs/netdata-agent/configuration/README.md#the-netdata-config-directory).\n\n```bash\ncd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata\nsudo ./edit-config go.d/snmp.conf\n```\n#### Options\n\nThe following options can be defined globally: update_every, autodetection_retry.\n\n\n| Name | Description | Default | Required |\n|:----|:-----------|:-------|:--------:|\n| update_every | Data collection frequency. | 10 | no |\n| autodetection_retry | Recheck interval in seconds. Zero means no recheck will be scheduled. | 0 | no |\n| hostname | Target ipv4 address. | | yes |\n| community | SNMPv1/2 community string. | public | no |\n| options.version | SNMP version. Available versions: 1, 2, 3. | 2 | no |\n| options.port | Target port. | 161 | no |\n| options.retries | Retries to attempt. | 1 | no |\n| options.timeout | SNMP request/response timeout. | 5 | no |\n| options.max_repetitions | Controls how many SNMP variables to retrieve in a single GETBULK request. | 25 | no |\n| options.max_request_size | Maximum number of OIDs allowed in a single GET request. | 60 | no |\n| user.name | SNMPv3 user name. | | no |\n| user.name | Security level of SNMPv3 messages. | | no |\n| user.auth_proto | Security level of SNMPv3 messages. | | no |\n| user.name | Authentication protocol for SNMPv3 messages. | | no |\n| user.auth_key | Authentication protocol pass phrase. | | no |\n| user.priv_proto | Privacy protocol for SNMPv3 messages. | | no |\n| user.priv_key | Privacy protocol pass phrase. | | no |\n| charts | List of charts. | [] | yes |\n| charts.id | Chart ID. Used to uniquely identify the chart. | | yes |\n| charts.title | Chart title. | Untitled chart | no |\n| charts.units | Chart units. | num | no |\n| charts.family | Chart family. | charts.id | no |\n| charts.type | Chart type (line, area, stacked). | line | no |\n| charts.priority | Chart priority. | 70000 | no |\n| charts.multiply_range | Used when you need to define many charts using incremental OIDs. | [] | no |\n| charts.dimensions | List of chart dimensions. | [] | yes |\n| charts.dimensions.oid | Collected metric OID. | | yes |\n| charts.dimensions.name | Dimension name. | | yes |\n| charts.dimensions.algorithm | Dimension algorithm (absolute, incremental). | absolute | no |\n| charts.dimensions.multiplier | Collected value multiplier, applied to convert it properly to units. | 1 | no |\n| charts.dimensions.divisor | Collected value divisor, applied to convert it properly to units. | 1 | no |\n\n##### user.auth_proto\n\nThe security of an SNMPv3 message as per RFC 3414 (`user.level`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|------------------------------------------|\n| none | 1 | no message authentication or encryption |\n| authNoPriv | 2 | message authentication and no encryption |\n| authPriv | 3 | message authentication and encryption |\n\n\n##### user.name\n\nThe digest algorithm for SNMPv3 messages that require authentication (`user.auth_proto`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|-------------------------------------------|\n| none | 1 | no message authentication |\n| md5 | 2 | MD5 message authentication (HMAC-MD5-96) |\n| sha | 3 | SHA message authentication (HMAC-SHA-96) |\n| sha224 | 4 | SHA message authentication (HMAC-SHA-224) |\n| sha256 | 5 | SHA message authentication (HMAC-SHA-256) |\n| sha384 | 6 | SHA message authentication (HMAC-SHA-384) |\n| sha512 | 7 | SHA message authentication (HMAC-SHA-512) |\n\n\n##### user.priv_proto\n\nThe encryption algorithm for SNMPv3 messages that require privacy (`user.priv_proto`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|-------------------------------------------------------------------------|\n| none | 1 | no message encryption |\n| des | 2 | ES encryption (CBC-DES) |\n| aes | 3 | 128-bit AES encryption (CFB-AES-128) |\n| aes192 | 4 | 192-bit AES encryption (CFB-AES-192) with \"Blumenthal\" key localization |\n| aes256 | 5 | 256-bit AES encryption (CFB-AES-256) with \"Blumenthal\" key localization |\n| aes192c | 6 | 192-bit AES encryption (CFB-AES-192) with \"Reeder\" key localization |\n| aes256c | 7 | 256-bit AES encryption (CFB-AES-256) with \"Reeder\" key localization |\n\n\n#### Examples\n\n##### SNMPv1/2\n\nIn this example:\n\n- the SNMP device is `192.0.2.1`.\n- the SNMP version is `2`.\n- the SNMP community is `public`.\n- we will update the values every 10 seconds.\n\n\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n community: public\n options:\n version: 2\n\n```\n##### SNMPv3\n\nTo use SNMPv3:\n\n- use `user` instead of `community`.\n- set `options.version` to 3.\n\n\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n options:\n version: 3\n user:\n name: username\n level: authPriv\n auth_proto: sha256\n auth_key: auth_protocol_passphrase\n priv_proto: aes256\n priv_key: priv_protocol_passphrase\n\n```\n##### Custom OIDs\n\nIn this example:\n\n- the SNMP device is `192.0.2.1`.\n- the SNMP version is `2`.\n- the SNMP community is `public`.\n- we will update the values every 10 seconds.\n\n\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port1\"\n title: \"Switch Bandwidth for port 1\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.1\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.1\"\n multiplier: -8\n divisor: 1000\n - id: \"bandwidth_port2\"\n title: \"Switch Bandwidth for port 2\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.2\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.2\"\n multiplier: -8\n divisor: 1000\n\n```\n##### Custom OIDs with multiply range\n\nIf you need to define many charts using incremental OIDs, you can use the `charts.multiply_range` option.\n\nThis is like the SNMPv1/2 example, but the option will multiply the current chart from 1 to 24 inclusive, producing 24 charts in total for the 24 ports of the switch `192.0.2.1`.\n\nEach of the 24 new charts will have its id (1-24) appended at:\n\n- its chart unique `id`, i.e. `bandwidth_port_1` to `bandwidth_port_24`.\n- its title, i.e. `Switch Bandwidth for port 1` to `Switch Bandwidth for port 24`.\n- its `oid` (for all dimensions), i.e. dimension in will be `1.3.6.1.2.1.2.2.1.10.1` to `1.3.6.1.2.1.2.2.1.10.24`.\n- its `priority` will be incremented for each chart so that the charts will appear on the dashboard in this order.\n\n\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: \"192.0.2.1\"\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port\"\n title: \"Switch Bandwidth for port\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n multiply_range: [1, 24]\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16\"\n multiplier: -8\n divisor: 1000\n\n```\n##### Multiple devices with a common configuration\n\nYAML supports [anchors](https://yaml.org/spec/1.2.2/#3222-anchors-and-aliases). \nThe `&` defines and names an anchor, and the `*` uses it. `<<: *anchor` means, inject the anchor, then extend. We can use anchors to share the common configuration for multiple devices.\n\nThe following example:\n\n- adds an `anchor` to the first job.\n- injects (copies) the first job configuration to the second and updates `name` and `hostname` parameters.\n- injects (copies) the first job configuration to the third and updates `name` and `hostname` parameters.\n\n\n```yaml\njobs:\n - &anchor\n name: switch\n update_every: 10\n hostname: \"192.0.2.1\"\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port1\"\n title: \"Switch Bandwidth for port 1\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.1\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.1\"\n multiplier: -8\n divisor: 1000\n - <<: *anchor\n name: switch2\n hostname: \"192.0.2.2\"\n - <<: *anchor\n name: switch3\n hostname: \"192.0.2.3\"\n\n```\n",
16028
+ "overview": "# SNMP devices\n\nPlugin: go.d.plugin\nModule: snmp\n\n## Overview\n\nThis SNMP collector discovers and gathers statistics for network interfaces on SNMP-enabled devices:\n\n- Traffic\n- Packets (unicast, multicast, broadcast)\n- Errors\n- Discards\n- Administrative and operational status\n\nAdditionally, it collects overall device uptime.\n\nIt is compatible with all SNMP versions (v1, v2c, and v3) and uses the [gosnmp](https://github.com/gosnmp/gosnmp) package.\n\n**For advanced users**:\n\n- You can manually specify custom OIDs (Object Identifiers) to retrieve specific data points beyond the default metrics.\n- However, defining custom charts with dimensions for these OIDs requires manual configuration.\n\n\n\n\nThis collector is supported on all platforms.\n\nThis collector supports collecting metrics from multiple instances of this integration, including remote instances.\n\n\n### Default Behavior\n\n#### Auto-Detection\n\nThis integration doesn't support auto-detection.\n\n#### Limits\n\nThe default configuration for this integration does not impose any limits on data collection.\n\n#### Performance Impact\n\n**Device limitations**: Many SNMP switches and routers have limited processing power. They might not be able to report data as frequently as desired. You can monitor response times using go.d.plugin in debug mode to identify potential bottlenecks.\n\n**Concurrent access**: If multiple collectors or tools access the same SNMP device simultaneously, data points might be skipped. This is a limitation of the device itself, not this collector. To mitigate this, consider increasing the collection interval (update_every) to reduce the frequency of requests.\n\n",
16029
+ "setup": "## Setup\n\n### Prerequisites\n\nNo action required.\n\n### Configuration\n\n#### File\n\nThe configuration file name for this integration is `go.d/snmp.conf`.\n\n\nYou can edit the configuration file using the `edit-config` script from the\nNetdata [config directory](/docs/netdata-agent/configuration/README.md#the-netdata-config-directory).\n\n```bash\ncd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata\nsudo ./edit-config go.d/snmp.conf\n```\n#### Options\n\nThe following options can be defined globally: update_every, autodetection_retry.\n\n\n| Name | Description | Default | Required |\n|:----|:-----------|:-------|:--------:|\n| update_every | Data collection frequency. | 10 | no |\n| autodetection_retry | Recheck interval in seconds. Zero means no recheck will be scheduled. | 0 | no |\n| hostname | Target ipv4 address. | | yes |\n| community | SNMPv1/2 community string. | public | no |\n| options.version | SNMP version. Available versions: 1, 2, 3. | 2 | no |\n| options.port | Target port. | 161 | no |\n| options.retries | Retries to attempt. | 1 | no |\n| options.timeout | SNMP request/response timeout. | 5 | no |\n| options.max_repetitions | Controls how many SNMP variables to retrieve in a single GETBULK request. | 25 | no |\n| options.max_request_size | Maximum number of OIDs allowed in a single GET request. | 60 | no |\n| network_interface_filter.by_name | Filter interfaces by their names using [simple patterns](/src/libnetdata/simple_pattern/README.md#simple-patterns). | | no |\n| network_interface_filter.by_type | Filter interfaces by their types using [simple patterns](/src/libnetdata/simple_pattern/README.md#simple-patterns). | | no |\n| user.name | SNMPv3 user name. | | no |\n| user.name | Security level of SNMPv3 messages. | | no |\n| user.auth_proto | Security level of SNMPv3 messages. | | no |\n| user.name | Authentication protocol for SNMPv3 messages. | | no |\n| user.auth_key | Authentication protocol pass phrase. | | no |\n| user.priv_proto | Privacy protocol for SNMPv3 messages. | | no |\n| user.priv_key | Privacy protocol pass phrase. | | no |\n| charts | List of charts. | [] | yes |\n| charts.id | Chart ID. Used to uniquely identify the chart. | | yes |\n| charts.title | Chart title. | Untitled chart | no |\n| charts.units | Chart units. | num | no |\n| charts.family | Chart family. | charts.id | no |\n| charts.type | Chart type (line, area, stacked). | line | no |\n| charts.priority | Chart priority. | 70000 | no |\n| charts.multiply_range | Used when you need to define many charts using incremental OIDs. | [] | no |\n| charts.dimensions | List of chart dimensions. | [] | yes |\n| charts.dimensions.oid | Collected metric OID. | | yes |\n| charts.dimensions.name | Dimension name. | | yes |\n| charts.dimensions.algorithm | Dimension algorithm (absolute, incremental). | absolute | no |\n| charts.dimensions.multiplier | Collected value multiplier, applied to convert it properly to units. | 1 | no |\n| charts.dimensions.divisor | Collected value divisor, applied to convert it properly to units. | 1 | no |\n\n##### user.auth_proto\n\nThe security of an SNMPv3 message as per RFC 3414 (`user.level`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|------------------------------------------|\n| none | 1 | no message authentication or encryption |\n| authNoPriv | 2 | message authentication and no encryption |\n| authPriv | 3 | message authentication and encryption |\n\n\n##### user.name\n\nThe digest algorithm for SNMPv3 messages that require authentication (`user.auth_proto`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|-------------------------------------------|\n| none | 1 | no message authentication |\n| md5 | 2 | MD5 message authentication (HMAC-MD5-96) |\n| sha | 3 | SHA message authentication (HMAC-SHA-96) |\n| sha224 | 4 | SHA message authentication (HMAC-SHA-224) |\n| sha256 | 5 | SHA message authentication (HMAC-SHA-256) |\n| sha384 | 6 | SHA message authentication (HMAC-SHA-384) |\n| sha512 | 7 | SHA message authentication (HMAC-SHA-512) |\n\n\n##### user.priv_proto\n\nThe encryption algorithm for SNMPv3 messages that require privacy (`user.priv_proto`):\n\n| String value | Int value | Description |\n|:------------:|:---------:|-------------------------------------------------------------------------|\n| none | 1 | no message encryption |\n| des | 2 | ES encryption (CBC-DES) |\n| aes | 3 | 128-bit AES encryption (CFB-AES-128) |\n| aes192 | 4 | 192-bit AES encryption (CFB-AES-192) with \"Blumenthal\" key localization |\n| aes256 | 5 | 256-bit AES encryption (CFB-AES-256) with \"Blumenthal\" key localization |\n| aes192c | 6 | 192-bit AES encryption (CFB-AES-192) with \"Reeder\" key localization |\n| aes256c | 7 | 256-bit AES encryption (CFB-AES-256) with \"Reeder\" key localization |\n\n\n#### Examples\n\n##### SNMPv1/2\n\nIn this example:\n\n- the SNMP device is `192.0.2.1`.\n- the SNMP version is `2`.\n- the SNMP community is `public`.\n- we will update the values every 10 seconds.\n\n\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n community: public\n options:\n version: 2\n\n```\n##### SNMPv3\n\nTo use SNMPv3:\n\n- use `user` instead of `community`.\n- set `options.version` to 3.\n\n\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n options:\n version: 3\n user:\n name: username\n level: authPriv\n auth_proto: sha256\n auth_key: auth_protocol_passphrase\n priv_proto: aes256\n priv_key: priv_protocol_passphrase\n\n```\n##### Custom OIDs\n\nIn this example:\n\n- the SNMP device is `192.0.2.1`.\n- the SNMP version is `2`.\n- the SNMP community is `public`.\n- we will update the values every 10 seconds.\n\n\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: 192.0.2.1\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port1\"\n title: \"Switch Bandwidth for port 1\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.1\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.1\"\n multiplier: -8\n divisor: 1000\n - id: \"bandwidth_port2\"\n title: \"Switch Bandwidth for port 2\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.2\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.2\"\n multiplier: -8\n divisor: 1000\n\n```\n##### Custom OIDs with multiply range\n\nIf you need to define many charts using incremental OIDs, you can use the `charts.multiply_range` option.\n\nThis is like the SNMPv1/2 example, but the option will multiply the current chart from 1 to 24 inclusive, producing 24 charts in total for the 24 ports of the switch `192.0.2.1`.\n\nEach of the 24 new charts will have its id (1-24) appended at:\n\n- its chart unique `id`, i.e. `bandwidth_port_1` to `bandwidth_port_24`.\n- its title, i.e. `Switch Bandwidth for port 1` to `Switch Bandwidth for port 24`.\n- its `oid` (for all dimensions), i.e. dimension in will be `1.3.6.1.2.1.2.2.1.10.1` to `1.3.6.1.2.1.2.2.1.10.24`.\n- its `priority` will be incremented for each chart so that the charts will appear on the dashboard in this order.\n\n\n```yaml\njobs:\n - name: switch\n update_every: 10\n hostname: \"192.0.2.1\"\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port\"\n title: \"Switch Bandwidth for port\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n multiply_range: [1, 24]\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16\"\n multiplier: -8\n divisor: 1000\n\n```\n##### Multiple devices with a common configuration\n\nYAML supports [anchors](https://yaml.org/spec/1.2.2/#3222-anchors-and-aliases). \nThe `&` defines and names an anchor, and the `*` uses it. `<<: *anchor` means, inject the anchor, then extend. We can use anchors to share the common configuration for multiple devices.\n\nThe following example:\n\n- adds an `anchor` to the first job.\n- injects (copies) the first job configuration to the second and updates `name` and `hostname` parameters.\n- injects (copies) the first job configuration to the third and updates `name` and `hostname` parameters.\n\n\n```yaml\njobs:\n - &anchor\n name: switch\n update_every: 10\n hostname: \"192.0.2.1\"\n community: public\n options:\n version: 2\n charts:\n - id: \"bandwidth_port1\"\n title: \"Switch Bandwidth for port 1\"\n units: \"kilobits/s\"\n type: \"area\"\n family: \"ports\"\n dimensions:\n - name: \"in\"\n oid: \"1.3.6.1.2.1.2.2.1.10.1\"\n algorithm: \"incremental\"\n multiplier: 8\n divisor: 1000\n - name: \"out\"\n oid: \"1.3.6.1.2.1.2.2.1.16.1\"\n multiplier: -8\n divisor: 1000\n - <<: *anchor\n name: switch2\n hostname: \"192.0.2.2\"\n - <<: *anchor\n name: switch3\n hostname: \"192.0.2.3\"\n\n```\n",
16030
"troubleshooting": "## Troubleshooting\n\n### Debug Mode\n\nTo troubleshoot issues with the `snmp` collector, run the `go.d.plugin` with the debug option enabled. The output\nshould give you clues as to why the collector isn't working.\n\n- Navigate to the `plugins.d` directory, usually at `/usr/libexec/netdata/plugins.d/`. If that's not the case on\n your system, open `netdata.conf` and look for the `plugins` setting under `[directories]`.\n\n ```bash\n cd /usr/libexec/netdata/plugins.d/\n ```\n\n- Switch to the `netdata` user.\n\n ```bash\n sudo -u netdata -s\n ```\n\n- Run the `go.d.plugin` to debug the collector:\n\n ```bash\n ./go.d.plugin -d -m snmp\n ```\n\n### Getting Logs\n\nIf you're encountering problems with the `snmp` collector, follow these steps to retrieve logs and identify potential issues:\n\n- **Run the command** specific to your system (systemd, non-systemd, or Docker container).\n- **Examine the output** for any warnings or error messages that might indicate issues. These messages should provide clues about the root cause of the problem.\n\n#### System with systemd\n\nUse the following command to view logs generated since the last Netdata service restart:\n\n```bash\njournalctl _SYSTEMD_INVOCATION_ID=\"$(systemctl show --value --property=InvocationID netdata)\" --namespace=netdata --grep snmp\n```\n\n#### System without systemd\n\nLocate the collector log file, typically at `/var/log/netdata/collector.log`, and use `grep` to filter for collector's name:\n\n```bash\ngrep snmp /var/log/netdata/collector.log\n```\n\n**Note**: This method shows logs from all restarts. Focus on the **latest entries** for troubleshooting current issues.\n\n#### Docker Container\n\nIf your Netdata runs in a Docker container named \"netdata\" (replace if different), use this command:\n\n```bash\ndocker logs netdata 2>&1 | grep snmp\n```\n\n",
16031
"alerts": "## Alerts\n\nThere are no alerts configured by default for this integration.\n",
16032
"metrics": "## Metrics\n\nMetrics grouped by *scope*.\n\nThe scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels.\n\nThe metrics that will be collected are defined in the configuration file.\n\n### Per snmp device\n\nThese metrics refer to the SNMP device.\n\nLabels:\n\n| Label | Description |\n|:-----------|:----------------|\n| sysName | SNMP device's system name (OID: [1.3.6.1.2.1.1.5](https://oidref.com/1.3.6.1.2.1.1.5)). |\n\nMetrics:\n\n| Metric | Dimensions | Unit |\n|:------|:----------|:----|\n| snmp.device_uptime | uptime | seconds |\n\n### Per network interface\n\nNetwork interfaces of the SNMP device being monitored. These metrics refer to each interface.\n\nLabels:\n\n| Label | Description |\n|:-----------|:----------------|\n| sysName | SNMP device's system name (OID: [1.3.6.1.2.1.1.5](https://oidref.com/1.3.6.1.2.1.1.5)). |\n| ifDescr | Network interface description (OID: [1.3.6.1.2.1.2.2.1.2](https://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?oid=1.3.6.1.2.1.2.2.1.2)). |\n| ifName | Network interface name (OID: [1.3.6.1.2.1.2.2.1.2](https://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?oid=1.3.6.1.2.1.31.1.1.1.1)). |\n| ifType | Network interface type (OID: [1.3.6.1.2.1.2.2.1.2](https://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?oid=1.3.6.1.2.1.2.2.1.3)). |\n\nMetrics:\n\n| Metric | Dimensions | Unit |\n|:------|:----------|:----|\n| snmp.device_net_interface_traffic | received, sent | kilobits/s |\n| snmp.device_net_interface_unicast | received, sent | packets/s |\n| snmp.device_net_interface_multicast | received, sent | packets/s |\n| snmp.device_net_interface_broadcast | received, sent | packets/s |\n| snmp.device_net_interface_errors | inbound, outbound | errors/s |\n| snmp.device_net_interface_discards | inbound, outbound | discards/s |\n| snmp.device_net_interface_admin_status | up, down, testing | status |\n| snmp.device_net_interface_oper_status | up, down, testing, unknown, dormant, not_present, lower_layer_down | status |\n\n",
src/go/collectors/go.d.plugin/modules/ping/integrations/ping.md
+1
-1
@@ -39,7 +39,7 @@ There are two operational modes:
39
```bash
40
sudo sysctl -w net.ipv4.ping_group_range="0 2147483647"
41
```
42
- To persist the change add `net.ipv4.ping_group_range="0 2147483647"` to `/etc/sysctl.conf` and
42
+ To persist the change add `net.ipv4.ping_group_range=0 2147483647` to `/etc/sysctl.conf` and
43
execute `sudo sysctl -p`.
44
45
src/go/collectors/go.d.plugin/modules/snmp/integrations/snmp_devices.md
+4
-4
@@ -58,11 +58,9 @@ The default configuration for this integration does not impose any limits on dat
58
59
#### Performance Impact
60
61
-**Performance Considerations**:
61
+**Device limitations**: Many SNMP switches and routers have limited processing power. They might not be able to report data as frequently as desired. You can monitor response times using go.d.plugin in debug mode to identify potential bottlenecks.
62
63
-- **Device limitations**: Many SNMP switches and routers have limited processing power. They might not be able to report data as frequently as desired. You can monitor response times using go.d.plugin in debug mode to identify potential bottlenecks.
64
-
65
-- **Concurrent access**: If multiple collectors or tools access the same SNMP device simultaneously, data points might be skipped. This is a limitation of the device itself, not this collector. To mitigate this, consider increasing the collection interval (update_every) to reduce the frequency of requests.
63
+**Concurrent access**: If multiple collectors or tools access the same SNMP device simultaneously, data points might be skipped. This is a limitation of the device itself, not this collector. To mitigate this, consider increasing the collection interval (update_every) to reduce the frequency of requests.
64
65
66
@@ -162,6 +160,8 @@ The following options can be defined globally: update_every, autodetection_retry
160
| options.timeout | SNMP request/response timeout. | 5 | no |
161
| options.max_repetitions | Controls how many SNMP variables to retrieve in a single GETBULK request. | 25 | no |
162
| options.max_request_size | Maximum number of OIDs allowed in a single GET request. | 60 | no |
163
+| network_interface_filter.by_name | Filter interfaces by their names using [simple patterns](/src/libnetdata/simple_pattern/README.md#simple-patterns). | | no |
164
+| network_interface_filter.by_type | Filter interfaces by their types using [simple patterns](/src/libnetdata/simple_pattern/README.md#simple-patterns). | | no |
165
| user.name | SNMPv3 user name. | | no |
166
| user.name | Security level of SNMPv3 messages. | | no |
167
| user.auth_proto | Security level of SNMPv3 messages. | | no |