73811e6628 · matheusbsbs/matheus-bagliano

@@ -11,7 +11,6 @@ SYNOPSIS

11 'git send-email' [options] <file|directory> [... file|directory]

12

13

14 -

14 DESCRIPTION

15 -----------

16 Takes the patches given on the command line and emails them out.

@@ -45,19 +44,35 @@ The --cc option must be repeated for each user you want on the cc list.

44 email sent. If disabled with "--no-chain-reply-to", all emails after

45 the first will be sent as replies to the first email sent. When using

46 this, it is recommended that the first file given be an overview of the

48 - entire patch series.

49 - Default is the value of the 'sendemail.chainreplyto' configuration

50 - value; if that is unspecified, default to --chain-reply-to.

47 + entire patch series. Default is the value of the 'sendemail.chainreplyto'

48 + configuration value; if that is unspecified, default to --chain-reply-to.

49

50 --compose::

51 Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an

52 introductory message for the patch series.

53

54 +--dry-run::

55 + Do everything except actually send the emails.

56 +

57 +--envelope-sender::

58 + Specify the envelope sender used to send the emails.

59 + This is useful if your default address is not the address that is

60 + subscribed to a list. If you use the sendmail binary, you must have

61 + suitable privileges for the -f parameter. Default is the value of

62 + the 'sendemail.envelopesender' configuration variable; if that is

63 + unspecified, choosing the envelope sender is left to your MTA.

64 +

65 --from::

66 Specify the sender of the emails. This will default to

67 the value GIT_COMMITTER_IDENT, as returned by "git var -l".

68 The user will still be prompted to confirm this entry.

69

70 +--identity::

71 + A configuration identity. When given, causes values in the

72 + 'sendemail.<identity>' subsection to take precedence over

73 + values in the 'sendemail' section. The default identity is

74 + the value of 'sendemail.identity'.

75 +

76 --in-reply-to::

77 Specify the contents of the first In-Reply-To header.

78 Subsequent emails will refer to the previous email

@@ -65,21 +80,40 @@ The --cc option must be repeated for each user you want on the cc list.

80 Only necessary if --compose is also set. If --compose

81 is not set, this will be prompted for.

82

68 ---[no-]signed-off-by-cc::

69 - If this is set, add emails found in Signed-off-by: or Cc: lines to the

70 - cc list.

71 - Default is the value of 'sendemail.signedoffcc' configuration value;

72 - if that is unspecified, default to --signed-off-by-cc.

73 -

83 --quiet::

84 Make git-send-email less verbose. One line per email should be

85 all that is output.

86

78 ---identity::

79 - A configuration identity. When given, causes values in the

80 - 'sendemail.<identity>' subsection to take precedence over

81 - values in the 'sendemail' section. The default identity is

82 - the value of 'sendemail.identity'.

87 +--[no-]signed-off-by-cc::

88 + If this is set, add emails found in Signed-off-by: or Cc: lines to the

89 + cc list. Default is the value of 'sendemail.signedoffcc' configuration

90 + value; if that is unspecified, default to --signed-off-by-cc.

91 +

92 +--smtp-encryption::

93 + Specify the encryption to use, either 'ssl' or 'tls'. Any other

94 + value reverts to plain SMTP. Default is the value of

95 + 'sendemail.smtpencryption'.

96 +

97 +--smtp-pass::

98 + Password for SMTP-AUTH. The argument is optional: If no

99 + argument is specified, then the empty string is used as

100 + the password.

101 ++

102 +In place of this option, the following configuration variables

103 +can be specified:

104 ++

105 +--

106 + * sendemail.smtppass

107 + * sendemail.<identity>.smtppass (see sendemail.identity).

108 +--

109 ++

110 +However, --smtp-pass always overrides these variables.

111 ++

112 +Furthermore, passwords need not be specified in configuration files

113 +or on the command line. If a username has been specified (with

114 +--smtp-user or a configuration variable), but no password has been

115 +specified (with --smtp-pass or a configuration variable), then the

116 +user is prompted for a password while the input is masked for privacy.

117

118 --smtp-server::

119 If set, specifies the outgoing SMTP server to use (e.g.

@@ -96,6 +130,9 @@ The --cc option must be repeated for each user you want on the cc list.

130 servers typically listen to smtp port 25 and ssmtp port

131 465).

132

133 +--smtp-ssl::

134 + Legacy alias for '--smtp-encryption=ssl'.

135 +

136 --smtp-user::

137 Username for SMTP-AUTH. In place of this option, the following

138 configuration variables can be specified:

@@ -110,45 +147,11 @@ However, --smtp-user always overrides these variables.

147 If a username is not specified (with --smtp-user or a

148 configuration variable), then authentication is not attempted.

149

113 ---smtp-pass::

114 - Password for SMTP-AUTH. The argument is optional: If no

115 - argument is specified, then the empty string is used as

116 - the password.

117 -+

118 -In place of this option, the following configuration variables

119 -can be specified:

120 -+

121 ---

122 - * sendemail.smtppass

123 - * sendemail.<identity>.smtppass (see sendemail.identity).

124 ---

125 -+

126 -However, --smtp-pass always overrides these variables.

127 -+

128 -Furthermore, passwords need not be specified in configuration files

129 -or on the command line. If a username has been specified (with

130 ---smtp-user or a configuration variable), but no password has been

131 -specified (with --smtp-pass or a configuration variable), then the

132 -user is prompted for a password while the input is masked for privacy.

133 -

134 ---smtp-encryption::

135 - Specify the encryption to use, either 'ssl' or 'tls'. Any other

136 - value reverts to plain SMTP. Default is the value of

137 - 'sendemail.smtpencryption'.

138 -

139 ---smtp-ssl::

140 - Legacy alias for '--smtp-encryption=ssl'.

141 -

150 --subject::

151 Specify the initial subject of the email thread.

152 Only necessary if --compose is also set. If --compose

153 is not set, this will be prompted for.

154

147 ---[no-]suppress-from::

148 - If this is set, do not add the From: address to the cc: list.

149 - Default is the value of 'sendemail.suppressfrom' configuration value;

150 - if that is unspecified, default to --no-suppress-from.

151 -

155 --suppress-cc::

156 Specify an additional category of recipients to suppress the

157 auto-cc of. 'self' will avoid including the sender, 'author' will

@@ -160,24 +163,24 @@ user is prompted for a password while the input is masked for privacy.

163 if that is unspecified, default to 'self' if --suppress-from is

164 specified, as well as 'sob' if --no-signed-off-cc is specified.

165

166 +--[no-]suppress-from::

167 + If this is set, do not add the From: address to the cc: list.

168 + Default is the value of 'sendemail.suppressfrom' configuration

169 + value; if that is unspecified, default to --no-suppress-from.

170 +

171 --[no-]thread::

172 If this is set, the In-Reply-To header will be set on each email sent.

173 If disabled with "--no-thread", no emails will have the In-Reply-To

166 - header set.

167 - Default is the value of the 'sendemail.thread' configuration value;

168 - if that is unspecified, default to --thread.

174 + header set. Default is the value of the 'sendemail.thread' configuration

175 + value; if that is unspecified, default to --thread.

176

170 ---dry-run::

171 - Do everything except actually send the emails.

172 -

173 ---envelope-sender::

174 - Specify the envelope sender used to send the emails.

175 - This is useful if your default address is not the address that is

176 - subscribed to a list. If you use the sendmail binary, you must have

177 - suitable privileges for the -f parameter.

178 - Default is the value of the 'sendemail.envelopesender' configuration

179 - variable; if that is unspecified, choosing the envelope sender is left

180 - to your MTA.

177 +--to::

178 + Specify the primary recipient of the emails generated. Generally, this

179 + will be the upstream maintainer of the project involved. Default is the

180 + value of the 'sendemail.to' configuration value; if that is unspecified,

181 + this will be prompted for.

182 ++

183 +The --to option must be repeated for each user you want on the to list.

184

185 --no-validate::

186 Don't perform any sanity checks on patches.

@@ -188,15 +191,6 @@ user is prompted for a password while the input is masked for privacy.

191 is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt.

192 --

193

191 ---to::

192 - Specify the primary recipient of the emails generated.

193 - Generally, this will be the upstream maintainer of the

194 - project involved.

195 - Default is the value of the 'sendemail.to' configuration value;

196 - if that is unspecified, this will be prompted for.

197 -+

198 -The --to option must be repeated for each user you want on the to list.

199 -

194

195 CONFIGURATION

196 -------------

Docs: send-email: Man page option ordering