@samitouri / QOSAMI-WSL / commits / 2793f4c9

Localization change from build: 145118702 (#40271)

Co-authored-by: WSL localization <noreply@microsoft.com>

Blue committed Apr 22, 2026 at 08:19 UTC 2793f4c90e11c5704eee3ee149f3f3f270c21761
18 files changed +166 -166
localization/strings/cs-CZ/Resources.resw
+10 -10
@@ -880,7 +880,7 @@ Návrat k sítím NAT.</value>
880 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
881 </data>
882 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
883 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
883 + <value>Protokol IPv6 je na hostiteli zakázán nepodporovaným způsobem (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
884 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
885 </data>
886 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1882,25 +1882,25 @@ K dalším možnostem VS Code Remote můžete přistupovat také prostřednictv
1882 <value>Počet milisekund, po které je virtuální počítač nečinný, než se vypne.</value>
1883 </data>
1884 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1885 - <value>Apply changes</value>
1885 + <value>Použít změny</value>
1886 </data>
1887 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1888 - <value>WSL Shutdown Required</value>
1888 + <value>Je potřeba vypnout WSL</value>
1889 </data>
1890 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1891 - <value>Changed WSL settings require a WSL shutdown and restart to finalize. Shutting down will cause any active WSL sessions to terminate.</value>
1891 + <value>Změny nastavení WSL vyžadují k dokončení vypnutí a restartování WSL. Po vypnutí se ukončí všechny aktivní relace WSL.</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1894 - <value>Shutdown WSL now</value>
1894 + <value>Vypnout WSL teď</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1897 - <value>Later</value>
1897 + <value>Později</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1900 - <value>Unable to apply changes</value>
1900 + <value>Nepovedlo se použít změny</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1903 - <value>Close</value>
1903 + <value>Zavřít</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1906 <value>Nepovedlo se uložit čekající změny nastavení. Kód chyby: {0}</value>
@@ -1911,10 +1911,10 @@ K dalším možnostem VS Code Remote můžete přistupovat také prostřednictv
1911 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1912 </data>
1913 <data name="Settings_BooleanTrueText" xml:space="preserve">
1914 - <value>On</value>
1914 + <value>Zapnuto</value>
1915 </data>
1916 <data name="Settings_BooleanFalseText" xml:space="preserve">
1917 - <value>Off</value>
1917 + <value>Vypnuto</value>
1918 </data>
1919 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1920 <value>Vytvářejte, spouštějte, laďte a profilujte své aplikace běžící na WSL z Visual Studia</value>
localization/strings/de-DE/Resources.resw
+11 -11
@@ -886,7 +886,7 @@ Fallback auf NAT-Netzwerk.</value>
886 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
887 </data>
888 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
889 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
889 + <value>IPv6 ist auf dem Host auf eine nicht unterstützte Weise deaktiviert (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
890 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
891 </data>
892 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1888,39 +1888,39 @@ Sie können auch über die Befehlspalette in VS Code selbst auf weitere VS Code
1888 <value>Die Anzahl von Millisekunden, die eine VM im Leerlauf ist, bevor sie heruntergefahren wird.</value>
1889 </data>
1890 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1891 - <value>Apply changes</value>
1891 + <value>Änderungen anwenden</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1894 - <value>WSL Shutdown Required</value>
1894 + <value>WSL-Herunterfahren erforderlich</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1897 - <value>Changed WSL settings require a WSL shutdown and restart to finalize. Shutting down will cause any active WSL sessions to terminate.</value>
1897 + <value>Geänderte WSL-Einstellungen erfordern ein Herunterfahren und einen Neustart von WSL, um abgeschlossen zu werden. Das Herunterfahren beendet alle aktiven WSL-Sitzungen.</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1900 - <value>Shutdown WSL now</value>
1900 + <value>WSL jetzt herunterfahren</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1903 - <value>Later</value>
1903 + <value>Später</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1906 - <value>Unable to apply changes</value>
1906 + <value>Änderungen können nicht angewendet werden.</value>
1907 </data>
1908 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1909 - <value>Close</value>
1909 + <value>Schließen</value>
1910 </data>
1911 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1912 <value>Fehler beim Speichern ausstehender Einstellungsänderungen. Fehlercode: {0}</value>
1913 <comment>{Locked="{0}"}Format placeholder for Win32 error code</comment>
1914 </data>
1915 <data name="Settings_ApplyChangesDialogShutdownFailed" xml:space="preserve">
1916 - <value>Settings were saved, but shutting down WSL failed: {0}</value>
1916 + <value>Die Einstellungen wurden gespeichert, aber beim Herunterfahren der WSL ist ein Fehler aufgetreten: {0}</value>
1917 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1918 </data>
1919 <data name="Settings_BooleanTrueText" xml:space="preserve">
1920 - <value>On</value>
1920 + <value>Ein</value>
1921 </data>
1922 <data name="Settings_BooleanFalseText" xml:space="preserve">
1923 - <value>Off</value>
1923 + <value>Aus</value>
1924 </data>
1925 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1926 <value>Erstellen, Ausführen, Debuggen und Profilieren von Apps, die auf WSL laufen, direkt in Visual Studio</value>
localization/strings/en-GB/Resources.resw
+3 -3
@@ -1885,13 +1885,13 @@ You can also access more VS Code Remote options through the command palette with
1885 <value>Apply changes</value>
1886 </data>
1887 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1888 - <value>WSL Shutdown Required</value>
1888 + <value>WSL Shut-down Required</value>
1889 </data>
1890 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1891 - <value>Changed WSL settings require a WSL shutdown and restart to finalize. Shutting down will cause any active WSL sessions to terminate.</value>
1891 + <value>Changed WSL settings require a WSL shut-down and restart to finalise. Shutting down will cause any active WSL sessions to terminate.</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1894 - <value>Shutdown WSL now</value>
1894 + <value>Shut-down WSL now</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1897 <value>Later</value>
localization/strings/es-ES/Resources.resw
+9 -9
@@ -886,7 +886,7 @@ Revirtiendo a las redes NAT.</value>
886 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
887 </data>
888 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
889 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
889 + <value>IPv6 está deshabilitado en el host de forma no compatible (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
890 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
891 </data>
892 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1888,25 +1888,25 @@ También puedes acceder a más opciones remotas de VS Code mediante la paleta d
1888 <value>Número de milisegundos que una VM está inactiva antes de apagarse.</value>
1889 </data>
1890 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1891 - <value>Apply changes</value>
1891 + <value>Aplicar cambios</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1894 - <value>WSL Shutdown Required</value>
1894 + <value>Apagado de WSL requerido</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1897 <value>La configuración de WSL modificada requiere un apagado y reinicio de WSL para finalizar. Si se cierra, finalizarán todas las sesiones de WSL activas.</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1900 - <value>Shutdown WSL now</value>
1900 + <value>Apagar WSL ahora</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1903 - <value>Later</value>
1903 + <value>Más tarde</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1906 - <value>Unable to apply changes</value>
1906 + <value>No se pueden aplicar los cambios</value>
1907 </data>
1908 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1909 - <value>Close</value>
1909 + <value>Cerrar</value>
1910 </data>
1911 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1912 <value>No se pudieron guardar los cambios de configuración pendientes. Código de error: {0}</value>
@@ -1917,10 +1917,10 @@ También puedes acceder a más opciones remotas de VS Code mediante la paleta d
1917 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1918 </data>
1919 <data name="Settings_BooleanTrueText" xml:space="preserve">
1920 - <value>On</value>
1920 + <value>Activado</value>
1921 </data>
1922 <data name="Settings_BooleanFalseText" xml:space="preserve">
1923 - <value>Off</value>
1923 + <value>Desactivado</value>
1924 </data>
1925 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1926 <value>Compila, ejecuta, depura y analiza el perfil de tus aplicaciones que se ejecutan en WSL desde Visual Studio</value>
localization/strings/fi-FI/Resources.resw
+11 -11
@@ -880,7 +880,7 @@ Palataan nat-verkkopalveluun.</value>
880 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
881 </data>
882 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
883 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
883 + <value>IPv6 on poistettu käytöstä isäntäkoneessa ei tuetulla tavalla (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
884 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
885 </data>
886 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1882,39 +1882,39 @@ Voit käyttää myös muita VS Code Remote -asetuksia VS Coden komentovalikoiman
1882 <value>Virtuaalikoneen käyttämättömyysaika millisekunteina, ennen kuin se sammutetaan.</value>
1883 </data>
1884 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1885 - <value>Apply changes</value>
1885 + <value>Ota muutokset käyttöön</value>
1886 </data>
1887 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1888 - <value>WSL Shutdown Required</value>
1888 + <value>WSL:n sammutus tarvitaan</value>
1889 </data>
1890 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1891 - <value>Changed WSL settings require a WSL shutdown and restart to finalize. Shutting down will cause any active WSL sessions to terminate.</value>
1891 + <value>Muutetut WSL-asetukset vaativat WSL:n sulkemisen ja uudelleenkäynnistyksen, jotta muutokset tulevat voimaan. Sulkeminen lopettaa kaikki aktiiviset WSL-istunnot.</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1894 - <value>Shutdown WSL now</value>
1894 + <value>Sammuta WSL nyt</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1897 - <value>Later</value>
1897 + <value>Myöhemmin</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1900 - <value>Unable to apply changes</value>
1900 + <value>Muutosten käyttöönotto epäonnistui</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1903 - <value>Close</value>
1903 + <value>Sulje</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1906 <value>Odottavien asetusten muutosten tallentaminen epäonnistui. Virhekoodi: {0}</value>
1907 <comment>{Locked="{0}"}Format placeholder for Win32 error code</comment>
1908 </data>
1909 <data name="Settings_ApplyChangesDialogShutdownFailed" xml:space="preserve">
1910 - <value>Settings were saved, but shutting down WSL failed: {0}</value>
1910 + <value>Asetukset tallennettiin, mutta WSL:n sammuttaminen epäonnistui: {0}</value>
1911 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1912 </data>
1913 <data name="Settings_BooleanTrueText" xml:space="preserve">
1914 - <value>On</value>
1914 + <value>Käytössä</value>
1915 </data>
1916 <data name="Settings_BooleanFalseText" xml:space="preserve">
1917 - <value>Off</value>
1917 + <value>Ei käytössä</value>
1918 </data>
1919 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1920 <value>Kehitä, suorita ja profiloi sovelluksiasi, jotka toimivat WSL:ssä, sekä korjaa niiden virheitä Visual Studion kautta</value>
localization/strings/fr-FR/Resources.resw
+9 -9
@@ -887,7 +887,7 @@ Retour à la mise en réseau NAT.</value>
887 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
888 </data>
889 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
890 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
890 + <value>IPv6 est désactivé sur l’hôte de manière non prise en charge (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
891 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
892 </data>
893 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1889,25 +1889,25 @@ Vous pouvez également accéder à davantage d'options VS Code Remote via la pal
1889 <value>Nombre de millisecondes pendant lesquelles une machine virtuelle est inactive, avant d’être éteinte.</value>
1890 </data>
1891 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1892 - <value>Apply changes</value>
1892 + <value>Appliquer les modifications</value>
1893 </data>
1894 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1895 - <value>WSL Shutdown Required</value>
1895 + <value>Arrêt de WSL requis</value>
1896 </data>
1897 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1898 <value>Les paramètres WSL modifiés nécessitent un arrêt et un redémarrage WSL pour finalisation. L’arrêt entraîne l’arrêt de toutes les sessions WSL actives.</value>
1899 </data>
1900 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1901 - <value>Shutdown WSL now</value>
1901 + <value>Arrêter WSL maintenant</value>
1902 </data>
1903 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1904 - <value>Later</value>
1904 + <value>Plus tard</value>
1905 </data>
1906 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1907 - <value>Unable to apply changes</value>
1907 + <value>Redémarrer pour appliquer les modifications</value>
1908 </data>
1909 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1910 - <value>Close</value>
1910 + <value>Fermer</value>
1911 </data>
1912 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1913 <value>Échec de l’enregistrement des modifications des paramètres en attente. Code d’erreur : {0}</value>
@@ -1918,10 +1918,10 @@ Vous pouvez également accéder à davantage d'options VS Code Remote via la pal
1918 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1919 </data>
1920 <data name="Settings_BooleanTrueText" xml:space="preserve">
1921 - <value>On</value>
1921 + <value>Activé</value>
1922 </data>
1923 <data name="Settings_BooleanFalseText" xml:space="preserve">
1924 - <value>Off</value>
1924 + <value>Désactivé</value>
1925 </data>
1926 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1927 <value>Créer, exécuter, déboguer et profiler vos applications exécutées sur WSL dans Visual Studio</value>
localization/strings/hu-HU/Resources.resw
+10 -10
@@ -880,7 +880,7 @@ Visszaállás NAT-hálózatkezelésre.</value>
880 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
881 </data>
882 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
883 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
883 + <value>Az IPv6 nem támogatott módon van letiltva a gazdagépen (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
884 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
885 </data>
886 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1882,25 +1882,25 @@ A VS Code-ban található parancskatalógusban további VS Code Remote beállít
1882 <value>A virtuális gép üresjárati ideje ezredmásodpercben a leállítás előtt.</value>
1883 </data>
1884 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1885 - <value>Apply changes</value>
1885 + <value>Módosítások alkalmazása</value>
1886 </data>
1887 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1888 - <value>WSL Shutdown Required</value>
1888 + <value>Le kell állítani a WSL-t</value>
1889 </data>
1890 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1891 - <value>Changed WSL settings require a WSL shutdown and restart to finalize. Shutting down will cause any active WSL sessions to terminate.</value>
1891 + <value>A módosított WSL-beállítások véglegesítéséhez le kell állítani és újra kell indítani a WSL-t. A leállítás megszakítja az összes aktív WSL-munkamenetet.</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1894 - <value>Shutdown WSL now</value>
1894 + <value>WSL leállítása most</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1897 - <value>Later</value>
1897 + <value>Később</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1900 - <value>Unable to apply changes</value>
1900 + <value>A módosítások alkalmazása nem sikerült</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1903 - <value>Close</value>
1903 + <value>Bezárás</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1906 <value>Nem sikerült menteni a függőben lévő beállítások módosításait. Hibakód: {0}</value>
@@ -1911,10 +1911,10 @@ A VS Code-ban található parancskatalógusban további VS Code Remote beállít
1911 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1912 </data>
1913 <data name="Settings_BooleanTrueText" xml:space="preserve">
1914 - <value>On</value>
1914 + <value>Bekapcsolva</value>
1915 </data>
1916 <data name="Settings_BooleanFalseText" xml:space="preserve">
1917 - <value>Off</value>
1917 + <value>Kikapcsolva</value>
1918 </data>
1919 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1920 <value>WSL-en futó alkalmazásokat készíthet, futtathat, profilozhat és végezhet rajtuk hibakeresést a Visual Studio segítségével</value>
localization/strings/it-IT/Resources.resw
+9 -9
@@ -886,7 +886,7 @@ Fallback alla rete NAT.</value>
886 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
887 </data>
888 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
889 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
889 + <value>IPv6 è disabilitato sull'host in modo non supportato (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
890 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
891 </data>
892 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1888,25 +1888,25 @@ Puoi anche accedere a più opzioni remote di VS Code tramite il riquadro comandi
1888 <value>Numero di millisecondi di inattività di una macchina virtuale prima dell'arresto.</value>
1889 </data>
1890 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1891 - <value>Apply changes</value>
1891 + <value>Applica modifiche</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1894 - <value>WSL Shutdown Required</value>
1894 + <value>Arresto WSL richiesto</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1897 <value>Le modifiche alle impostazioni di WSL richiedono un arresto e un riavvio di WSL per essere finalizzate. L'arresto causerà la terminazione di eventuali sessioni WSL attive.</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1900 - <value>Shutdown WSL now</value>
1900 + <value>Arresta WSL adesso</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1903 - <value>Later</value>
1903 + <value>Più tardi</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1906 - <value>Unable to apply changes</value>
1906 + <value>Non è possibile applicare le modifiche</value>
1907 </data>
1908 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1909 - <value>Close</value>
1909 + <value>Chiudi</value>
1910 </data>
1911 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1912 <value>Non è stato possibile salvare le modifiche alle impostazioni in sospeso. Codice errore: {0}</value>
@@ -1917,10 +1917,10 @@ Puoi anche accedere a più opzioni remote di VS Code tramite il riquadro comandi
1917 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1918 </data>
1919 <data name="Settings_BooleanTrueText" xml:space="preserve">
1920 - <value>On</value>
1920 + <value>Attivato</value>
1921 </data>
1922 <data name="Settings_BooleanFalseText" xml:space="preserve">
1923 - <value>Off</value>
1923 + <value>Disattivato</value>
1924 </data>
1925 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1926 <value>Compila, esegui, esegui il debug e profila le app in esecuzione in WSL da Visual Studio</value>
localization/strings/ko-KR/Resources.resw
+9 -9
@@ -886,7 +886,7 @@ NAT 네트워킹으로 대체합니다.</value>
886 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
887 </data>
888 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
889 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
889 + <value>호스트에서 지원하지 않는 방식으로 IPv6가 비활성화되어 있습니다(HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff).</value>
890 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
891 </data>
892 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1888,25 +1888,25 @@ VS Code 자체 내의 명령 팔레트를 통해 더 많은 VS Code 원격 옵
1888 <value>VM이 종료되기 전에 유휴 상태인 시간(밀리초)입니다.</value>
1889 </data>
1890 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1891 - <value>Apply changes</value>
1891 + <value>변경 내용 적용</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1894 - <value>WSL Shutdown Required</value>
1894 + <value>WSL 종료 필요</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1897 <value>변경된 WSL 설정을 완료하려면 WSL을 종료하고 다시 시작해야 합니다. 종료하면 활성 WSL 세션이 종료됩니다.</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1900 - <value>Shutdown WSL now</value>
1900 + <value>지금 WSL 종료</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1903 - <value>Later</value>
1903 + <value>나중에</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1906 - <value>Unable to apply changes</value>
1906 + <value>변경 내용을 적용할 수 없음</value>
1907 </data>
1908 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1909 - <value>Close</value>
1909 + <value>닫기</value>
1910 </data>
1911 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1912 <value>보류 중인 설정 변경 내용을 저장하지 못했습니다. 오류 코드: {0}</value>
@@ -1917,10 +1917,10 @@ VS Code 자체 내의 명령 팔레트를 통해 더 많은 VS Code 원격 옵
1917 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1918 </data>
1919 <data name="Settings_BooleanTrueText" xml:space="preserve">
1920 - <value>On</value>
1920 + <value>켜짐</value>
1921 </data>
1922 <data name="Settings_BooleanFalseText" xml:space="preserve">
1923 - <value>Off</value>
1923 + <value>꺼짐</value>
1924 </data>
1925 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1926 <value>Visual Studio에서 WSL로 실행 중인 앱을 빌드, 실행, 디버그 및 프로파일링하기</value>
localization/strings/nb-NO/Resources.resw
+9 -9
@@ -880,7 +880,7 @@ Faller tilbake til NAT-nettverk.</value>
880 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
881 </data>
882 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
883 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
883 + <value>IPv6 er deaktivert på verten på en ikke-støttet måte (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
884 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
885 </data>
886 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1882,25 +1882,25 @@ Du kan også åpne flere eksterne alternativer for VS Code gjennom kommandopalet
1882 <value>Antall millisekunder en virtuell maskin er inaktiv, før den avsluttes.</value>
1883 </data>
1884 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1885 - <value>Apply changes</value>
1885 + <value>Bruk endringer</value>
1886 </data>
1887 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1888 - <value>WSL Shutdown Required</value>
1888 + <value>WSL-avslutning kreves</value>
1889 </data>
1890 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1891 <value>Endrede WSL-innstillinger krever WSL-avslutning og omstart for å fullføre. Hvis du avslutter, avsluttes alle aktive WSL-økter.</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1894 - <value>Shutdown WSL now</value>
1894 + <value>Avslutt WSL nå</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1897 - <value>Later</value>
1897 + <value>Senere</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1900 - <value>Unable to apply changes</value>
1900 + <value>Kan ikke ta i bruk endringene</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1903 - <value>Close</value>
1903 + <value>Lukk</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1906 <value>Kan ikke lagre ventende innstillingsendringer. Feilkode: {0}</value>
@@ -1911,10 +1911,10 @@ Du kan også åpne flere eksterne alternativer for VS Code gjennom kommandopalet
1911 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1912 </data>
1913 <data name="Settings_BooleanTrueText" xml:space="preserve">
1914 - <value>On</value>
1914 + <value>På</value>
1915 </data>
1916 <data name="Settings_BooleanFalseText" xml:space="preserve">
1917 - <value>Off</value>
1917 + <value>Av</value>
1918 </data>
1919 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1920 <value>Bygg, kjør, feilsøk og profiler apper som kjører på WSL fra Visual Studio</value>
localization/strings/nl-NL/Resources.resw
+8 -8
@@ -880,7 +880,7 @@ Terugvallen op NAT-netwerken.</value>
880 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
881 </data>
882 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
883 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
883 + <value>IPv6 is op de host uitgeschakeld op een niet-ondersteunde manier (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
884 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
885 </data>
886 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1882,25 +1882,25 @@ U hebt ook toegang tot meer externe VS Code-opties via het opdrachtpalet in VS C
1882 <value>Het aantal milliseconden dat een VM inactief is voordat deze wordt afgesloten.</value>
1883 </data>
1884 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1885 - <value>Apply changes</value>
1885 + <value>Wijzigingen toepassen</value>
1886 </data>
1887 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1888 - <value>WSL Shutdown Required</value>
1888 + <value>WSL-afsluiting vereist</value>
1889 </data>
1890 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1891 <value>Voor gewijzigde WSL-instellingen is het afsluiten en opnieuw opstarten van WSL vereist. Als u afsluit, worden actieve WSL-sessies beëindigd.</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1894 - <value>Shutdown WSL now</value>
1894 + <value>WSL nu afsluiten</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1897 <value>Later</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1900 - <value>Unable to apply changes</value>
1900 + <value>Kan wijzigingen niet toepassen</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1903 - <value>Close</value>
1903 + <value>Sluiten</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1906 <value>Kan de in behandeling zijnde instellingswijzigingen niet opslaan. Foutcode: {0}</value>
@@ -1911,10 +1911,10 @@ U hebt ook toegang tot meer externe VS Code-opties via het opdrachtpalet in VS C
1911 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1912 </data>
1913 <data name="Settings_BooleanTrueText" xml:space="preserve">
1914 - <value>On</value>
1914 + <value>Aan</value>
1915 </data>
1916 <data name="Settings_BooleanFalseText" xml:space="preserve">
1917 - <value>Off</value>
1917 + <value>Uit</value>
1918 </data>
1919 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1920 <value>Apps die op WSL draaien vanuit Visual Studio maken, uitvoeren, profileren en fouten opsporen</value>
localization/strings/pl-PL/Resources.resw
+11 -11
@@ -880,7 +880,7 @@ Powrót do sieci NAT.</value>
880 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
881 </data>
882 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
883 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
883 + <value>Protokół IPv6 na hoście został wyłączony w nieobsługiwany sposób (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
884 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
885 </data>
886 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1882,39 +1882,39 @@ Możesz również uzyskać dostęp do większej liczby opcji zdalnych programu V
1882 <value>Liczba milisekund bezczynności maszyny wirtualnej przed jej zamknięciem.</value>
1883 </data>
1884 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1885 - <value>Apply changes</value>
1885 + <value>Zastosuj zmiany</value>
1886 </data>
1887 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1888 - <value>WSL Shutdown Required</value>
1888 + <value>Wymagane zamknięcie systemu WSL</value>
1889 </data>
1890 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1891 - <value>Changed WSL settings require a WSL shutdown and restart to finalize. Shutting down will cause any active WSL sessions to terminate.</value>
1891 + <value>Zmienione ustawienia systemu WSL wymagają zamknięcia i ponownego uruchomienia systemu WSL w celu sfinalizowania. Zamknięcie spowoduje przerwanie wszystkich aktywnych sesji systemu WSL.</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1894 - <value>Shutdown WSL now</value>
1894 + <value>Zamknij system WSL teraz</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1897 - <value>Later</value>
1897 + <value>Później</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1900 - <value>Unable to apply changes</value>
1900 + <value>Nie można zastosować zmian</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1903 - <value>Close</value>
1903 + <value>Zamknij</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1906 <value>Nie można zapisać oczekujących zmian ustawień. Kod błędu: {0}</value>
1907 <comment>{Locked="{0}"}Format placeholder for Win32 error code</comment>
1908 </data>
1909 <data name="Settings_ApplyChangesDialogShutdownFailed" xml:space="preserve">
1910 - <value>Settings were saved, but shutting down WSL failed: {0}</value>
1910 + <value>Ustawienia zostały zapisane, ale zamknięcie systemu WSL nie powiodło się: {0}</value>
1911 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1912 </data>
1913 <data name="Settings_BooleanTrueText" xml:space="preserve">
1914 - <value>On</value>
1914 + <value>Włączony</value>
1915 </data>
1916 <data name="Settings_BooleanFalseText" xml:space="preserve">
1917 - <value>Off</value>
1917 + <value>Wyłączony</value>
1918 </data>
1919 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1920 <value>Kompiluj, uruchamiaj, debuguj i profiluj aplikacje działające w systemie WSL z poziomu programu Visual Studio</value>
localization/strings/pt-BR/Resources.resw
+9 -9
@@ -887,7 +887,7 @@ Voltando à rede NAT.</value>
887 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
888 </data>
889 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
890 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
890 + <value>O IPv6 está desabilitado no host de uma forma sem suporte (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
891 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
892 </data>
893 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1889,25 +1889,25 @@ Você também pode acessar mais opções do VS Code Remote através da paleta de
1889 <value>O número de milissegundos em que uma VM está ociosa, antes de ser desligada.</value>
1890 </data>
1891 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1892 - <value>Apply changes</value>
1892 + <value>Aplicar alterações</value>
1893 </data>
1894 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1895 - <value>WSL Shutdown Required</value>
1895 + <value>É necessário desligar o WSL</value>
1896 </data>
1897 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1898 <value>As configurações alteradas do WSL exigem um desligamento do WSL e reinicialização para finalizar. O desligamento fará com que todas as sessões ativas do WSL sejam encerradas.</value>
1899 </data>
1900 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1901 - <value>Shutdown WSL now</value>
1901 + <value>Desligar o WSL agora</value>
1902 </data>
1903 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1904 - <value>Later</value>
1904 + <value>Mais tarde</value>
1905 </data>
1906 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1907 - <value>Unable to apply changes</value>
1907 + <value>Não foi possível aplicar alterações</value>
1908 </data>
1909 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1910 - <value>Close</value>
1910 + <value>Fechar</value>
1911 </data>
1912 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1913 <value>Falha ao salvar alterações de configurações pendentes. Código de erro: {0}</value>
@@ -1918,10 +1918,10 @@ Você também pode acessar mais opções do VS Code Remote através da paleta de
1918 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1919 </data>
1920 <data name="Settings_BooleanTrueText" xml:space="preserve">
1921 - <value>On</value>
1921 + <value>Ligado</value>
1922 </data>
1923 <data name="Settings_BooleanFalseText" xml:space="preserve">
1924 - <value>Off</value>
1924 + <value>Desligado</value>
1925 </data>
1926 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1927 <value>Crie, execute, depure e crie o perfil de seus aplicativos em execução no WSL no Visual Studio</value>
localization/strings/pt-PT/Resources.resw
+10 -10
@@ -880,7 +880,7 @@ A reverter para a rede NAT.</value>
880 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
881 </data>
882 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
883 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
883 + <value>O IPv6 está desativado no anfitrião de uma forma não suportada (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
884 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
885 </data>
886 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1882,25 +1882,25 @@ Também pode aceder a mais Opções remotas do VS Code através da paleta de com
1882 <value>O número de milissegundos em que uma VM está inativa antes de ser encerrada.</value>
1883 </data>
1884 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1885 - <value>Apply changes</value>
1885 + <value>Aplicar alterações</value>
1886 </data>
1887 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1888 - <value>WSL Shutdown Required</value>
1888 + <value>É Necessário Encerrar o WSL</value>
1889 </data>
1890 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1891 - <value>Changed WSL settings require a WSL shutdown and restart to finalize. Shutting down will cause any active WSL sessions to terminate.</value>
1891 + <value>As definições do WSL alteradas requerem o encerramento e o reinício do WSL para serem concluídas. O encerramento fará com que quaisquer sessões WSL ativas terminem.</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1894 - <value>Shutdown WSL now</value>
1894 + <value>Encerrar o WSL agora</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1897 - <value>Later</value>
1897 + <value>Mais tarde</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1900 - <value>Unable to apply changes</value>
1900 + <value>Não é possível aplicar as alterações</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1903 - <value>Close</value>
1903 + <value>Fechar</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1906 <value>Falha ao guardar alterações de definições pendentes. Código de erro: {0}</value>
@@ -1911,10 +1911,10 @@ Também pode aceder a mais Opções remotas do VS Code através da paleta de com
1911 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1912 </data>
1913 <data name="Settings_BooleanTrueText" xml:space="preserve">
1914 - <value>On</value>
1914 + <value>Ativado</value>
1915 </data>
1916 <data name="Settings_BooleanFalseText" xml:space="preserve">
1917 - <value>Off</value>
1917 + <value>Desativado</value>
1918 </data>
1919 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1920 <value>Crie, execute, depure e defina perfis para as suas aplicações em execução no WSL a partir do Visual Studio</value>
localization/strings/sv-SE/Resources.resw
+10 -10
@@ -880,7 +880,7 @@ Mer information finns på https://aka.ms/wslinstall</value>
880 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
881 </data>
882 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
883 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
883 + <value>IPv6 är inaktiverat på värden på ett sätt som inte stöds (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
884 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
885 </data>
886 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1882,25 +1882,25 @@ Du kan också komma åt fler VS Code-fjärralternativ via kommandopaletten inom
1882 <value>Antalet millisekunder som en virtuell dator är inaktiv innan den stängs av.</value>
1883 </data>
1884 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1885 - <value>Apply changes</value>
1885 + <value>Tillämpa ändringar</value>
1886 </data>
1887 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1888 - <value>WSL Shutdown Required</value>
1888 + <value>WSL-avstängning krävs</value>
1889 </data>
1890 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1891 - <value>Changed WSL settings require a WSL shutdown and restart to finalize. Shutting down will cause any active WSL sessions to terminate.</value>
1891 + <value>Ändrade WSL-inställningar kräver en WSL-avstängning och omstart för att slutföra. Om du stänger av avslutas alla aktiva WSL-sessioner.</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1894 - <value>Shutdown WSL now</value>
1894 + <value>Stäng av WSL nu</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1897 - <value>Later</value>
1897 + <value>Senare</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1900 - <value>Unable to apply changes</value>
1900 + <value>Det gick inte att tillämpa ändringarna</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1903 - <value>Close</value>
1903 + <value>Stäng</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1906 <value>Det gick inte att spara väntande inställningsändringar. Felkod: {0}</value>
@@ -1911,10 +1911,10 @@ Du kan också komma åt fler VS Code-fjärralternativ via kommandopaletten inom
1911 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1912 </data>
1913 <data name="Settings_BooleanTrueText" xml:space="preserve">
1914 - <value>On</value>
1914 + <value>På</value>
1915 </data>
1916 <data name="Settings_BooleanFalseText" xml:space="preserve">
1917 - <value>Off</value>
1917 + <value>Av</value>
1918 </data>
1919 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1920 <value>Skapa, kör, felsök och profilera dina appar som körs på WSL direkt från Visual Studio</value>
localization/strings/tr-TR/Resources.resw
+10 -10
@@ -880,7 +880,7 @@ NAT ağ bağlantısına geri dönülüyor.</value>
880 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
881 </data>
882 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
883 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
883 + <value>IPv6, ana bilgisayarda desteklenmeyen bir şekilde devre dışı bırakıldı (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
884 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
885 </data>
886 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1882,25 +1882,25 @@ Ayrıca VS Code'un içindeki komut paleti aracılığıyla daha fazla VS Code Re
1882 <value>Bir VM'nin kapatılmadan önce boşta olduğu milisaniye sayısı.</value>
1883 </data>
1884 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1885 - <value>Apply changes</value>
1885 + <value>Değişiklikleri uygula</value>
1886 </data>
1887 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1888 - <value>WSL Shutdown Required</value>
1888 + <value>WSL'nin Kapatılması Gerekiyor</value>
1889 </data>
1890 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1891 - <value>Changed WSL settings require a WSL shutdown and restart to finalize. Shutting down will cause any active WSL sessions to terminate.</value>
1891 + <value>Değiştirilen WSL ayarlarının geçerli hale gelmesi için WSL'nin kapatılıp yeniden başlatılması gerekir. Kapatma işlemi, aktif olan tüm WSL oturumlarının sonlanmasına yol açar.</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1894 - <value>Shutdown WSL now</value>
1894 + <value>WSL'yi şimdi kapatın</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1897 - <value>Later</value>
1897 + <value>Daha sonra</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1900 - <value>Unable to apply changes</value>
1900 + <value>Değişiklikler uygulanamıyor</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1903 - <value>Close</value>
1903 + <value>Kapat</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1906 <value>Bekleyen ayar değişiklikleri kaydedilemedi. Hata kodu: {0}</value>
@@ -1911,10 +1911,10 @@ Ayrıca VS Code'un içindeki komut paleti aracılığıyla daha fazla VS Code Re
1911 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1912 </data>
1913 <data name="Settings_BooleanTrueText" xml:space="preserve">
1914 - <value>On</value>
1914 + <value>Açık</value>
1915 </data>
1916 <data name="Settings_BooleanFalseText" xml:space="preserve">
1917 - <value>Off</value>
1917 + <value>Kapalı</value>
1918 </data>
1919 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1920 <value>Visual Studio'dan WSL üzerinde çalışan uygulamalarınızı derleyin, çalıştırın, hatalarını ayıklayın ve profillerini oluşturun</value>
localization/strings/zh-CN/Resources.resw
+9 -9
@@ -886,7 +886,7 @@ Windows: {}</value>
886 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
887 </data>
888 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
889 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
889 + <value>主机上以不受支持的方式禁用了 IPv6 (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
890 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
891 </data>
892 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1888,25 +1888,25 @@ wsl.exe --manage &lt;DistributionName&gt; --set-sparse true --allow-unsafe</valu
1888 <value>VM 在关闭之前处于空闲状态的毫秒数。</value>
1889 </data>
1890 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1891 - <value>Apply changes</value>
1891 + <value>应用更改</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1894 - <value>WSL Shutdown Required</value>
1894 + <value>需要关闭 WSL</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1897 <value>更改的 WSL 设置需要关闭 WSL 并重启才能完成。关闭将导致任何活动的 WSL 会话终止。</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1900 - <value>Shutdown WSL now</value>
1900 + <value>立即关闭 WSL</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1903 - <value>Later</value>
1903 + <value>以后再说</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1906 - <value>Unable to apply changes</value>
1906 + <value>无法应用更改</value>
1907 </data>
1908 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1909 - <value>Close</value>
1909 + <value>关闭</value>
1910 </data>
1911 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1912 <value>未能保存挂起的设置更改。错误代码： {0}</value>
@@ -1917,10 +1917,10 @@ wsl.exe --manage &lt;DistributionName&gt; --set-sparse true --allow-unsafe</valu
1917 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1918 </data>
1919 <data name="Settings_BooleanTrueText" xml:space="preserve">
1920 - <value>On</value>
1920 + <value>开</value>
1921 </data>
1922 <data name="Settings_BooleanFalseText" xml:space="preserve">
1923 - <value>Off</value>
1923 + <value>关</value>
1924 </data>
1925 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1926 <value>通过 Visual Studio 构建、运行、调试和分析运行于 WSL 上的应用</value>
localization/strings/zh-TW/Resources.resw
+9 -9
@@ -886,7 +886,7 @@ Windows 版本： {}</value>
886 <comment>{FixedPlaceholder="{}"}Command line arguments, file names and string inserts should not be translated</comment>
887 </data>
888 <data name="MessageMirroredNetworkingNotSupportedIpv6Disabled" xml:space="preserve">
889 - <value>IPv6 is disabled on the host in an unsupported way (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
889 + <value>在主機上以不受支援的方式停用 IPv6 (HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters DisabledComponents=0xff)</value>
890 <comment>{Locked="HKLM\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"}{Locked="DisabledComponents"}{Locked="0xff"}</comment>
891 </data>
892 <data name="MessageHyperVFirewallNotSupported" xml:space="preserve">
@@ -1888,25 +1888,25 @@ wsl.exe --manage &lt;DistributionName&gt; --set-sparse true --allow-unsafe</valu
1888 <value>VM 在關機前閒置的毫秒數。</value>
1889 </data>
1890 <data name="Settings_ApplyChangesButton.Content" xml:space="preserve">
1891 - <value>Apply changes</value>
1891 + <value>套用變更</value>
1892 </data>
1893 <data name="Settings_ApplyChangesDialogTitle" xml:space="preserve">
1894 - <value>WSL Shutdown Required</value>
1894 + <value>需要關閉 WSL</value>
1895 </data>
1896 <data name="Settings_ApplyChangesDialogDescription" xml:space="preserve">
1897 <value>變更的 WSL 設定需要關閉 WSL 並重新啟動才能完成。關機會導致所有使用中的 WSL 工作階段終止。</value>
1898 </data>
1899 <data name="Settings_ApplyChangesDialogShutdownButton" xml:space="preserve">
1900 - <value>Shutdown WSL now</value>
1900 + <value>立即關閉 WSL</value>
1901 </data>
1902 <data name="Settings_ApplyChangesDialogLaterButton" xml:space="preserve">
1903 - <value>Later</value>
1903 + <value>稍後</value>
1904 </data>
1905 <data name="Settings_ApplyChangesDialogFailedTitle" xml:space="preserve">
1906 - <value>Unable to apply changes</value>
1906 + <value>無法套用變更</value>
1907 </data>
1908 <data name="Settings_ApplyChangesDialogCloseButton" xml:space="preserve">
1909 - <value>Close</value>
1909 + <value>關閉</value>
1910 </data>
1911 <data name="Settings_ApplyChangesDialogCommitFailed" xml:space="preserve">
1912 <value>無法儲存擱置中的設定變更。錯誤碼： {0}</value>
@@ -1917,10 +1917,10 @@ wsl.exe --manage &lt;DistributionName&gt; --set-sparse true --allow-unsafe</valu
1917 <comment>{Locked="{0}"}Format placeholder for exception message</comment>
1918 </data>
1919 <data name="Settings_BooleanTrueText" xml:space="preserve">
1920 - <value>On</value>
1920 + <value>開啟</value>
1921 </data>
1922 <data name="Settings_BooleanFalseText" xml:space="preserve">
1923 - <value>Off</value>
1923 + <value>關閉</value>
1924 </data>
1925 <data name="Settings_OOBEVSIntegration.Title" xml:space="preserve">
1926 <value>從 Visual Studio 組建、執行、偵錯並分析在 WSL 上執行的應用程式</value>