| 1 | Controllers found: 1 |
| 2 | ---------------------------------------------------------------------- |
| 3 | Physical Device information |
| 4 | ---------------------------------------------------------------------- |
| 5 | Device #0 |
| 6 | Device is a Hard drive |
| 7 | State : Online |
| 8 | Block Size : 512 Bytes |
| 9 | Supported : Yes |
| 10 | Transfer Speed : SATA 6.0 Gb/s |
| 11 | Reported Channel,Device(T:L) : 0,16(16:0) |
| 12 | Reported Location : Enclosure 0, Slot 0( Connector Unknown ) |
| 13 | Reported ESD(T:L) : 2,0(0:0) |
| 14 | Vendor : ATA |
| 15 | Model : INTEL SSDSC2KB019T |
| 16 | Firmware : SCV10111 |
| 17 | Serial number : XXXXXXXXXXXXXXXXXX |
| 18 | Reserved Size : 3666200 KB |
| 19 | Used Size : 1827840 MB |
| 20 | Unused Size : 64 KB |
| 21 | Total Size : 1831420 MB |
| 22 | Write Cache : Enabled (write-back) |
| 23 | FRU : None |
| 24 | S.M.A.R.T. : No |
| 25 | S.M.A.R.T. warnings : 0 |
| 26 | Power State : Full rpm |
| 27 | Supported Power States : Full power,Powered off |
| 28 | SSD : Yes |
| 29 | Temperature : Not Supported |
| 30 | NCQ status : Enabled |
| 31 | ---------------------------------------------------------------- |
| 32 | Device Phy Information |
| 33 | ---------------------------------------------------------------- |
| 34 | Phy #0 |
| 35 | PHY Identifier : 0 |
| 36 | SAS Address : 5000 |
| 37 | Attached PHY Identifier : 12 |
| 38 | Attached SAS Address : 5000 |
| 39 | |
| 40 | Device #1 |
| 41 | Device is a Hard drive |
| 42 | State : Online |
| 43 | Block Size : 512 Bytes |
| 44 | Supported : Yes |
| 45 | Transfer Speed : SATA 6.0 Gb/s |
| 46 | Reported Channel,Device(T:L) : 0,17(17:0) |
| 47 | Reported Location : Enclosure 0, Slot 1( Connector Unknown ) |
| 48 | Reported ESD(T:L) : 2,0(0:0) |
| 49 | Vendor : ATA |
| 50 | Model : INTEL SSDSC2KB019T |
| 51 | Firmware : SCV10111 |
| 52 | Serial number : XXXXXXXXXXXXXXXXXX |
| 53 | Reserved Size : 3666200 KB |
| 54 | Used Size : 1827840 MB |
| 55 | Unused Size : 64 KB |
| 56 | Total Size : 1831420 MB |
| 57 | Write Cache : Enabled (write-back) |
| 58 | FRU : None |
| 59 | S.M.A.R.T. : No |
| 60 | S.M.A.R.T. warnings : 0 |
| 61 | Power State : Full rpm |
| 62 | Supported Power States : Full power,Powered off |
| 63 | SSD : Yes |
| 64 | Temperature : Not Supported |
| 65 | NCQ status : Enabled |
| 66 | ---------------------------------------------------------------- |
| 67 | Device Phy Information |
| 68 | ---------------------------------------------------------------- |
| 69 | Phy #0 |
| 70 | PHY Identifier : 0 |
| 71 | SAS Address : 5000 |
| 72 | Attached PHY Identifier : 13 |
| 73 | Attached SAS Address : 5000 |
| 74 | |
| 75 | Device #2 |
| 76 | Device is a Hard drive |
| 77 | State : Online |
| 78 | Block Size : 512 Bytes |
| 79 | Supported : Yes |
| 80 | Transfer Speed : SATA 6.0 Gb/s |
| 81 | Reported Channel,Device(T:L) : 0,18(18:0) |
| 82 | Reported Location : Enclosure 0, Slot 2( Connector Unknown ) |
| 83 | Reported ESD(T:L) : 2,0(0:0) |
| 84 | Vendor : ATA |
| 85 | Model : INTEL SSDSC2KB019T |
| 86 | Firmware : SCV10111 |
| 87 | Serial number : XXXXXXXXXXXXXXXXXX |
| 88 | Reserved Size : 3666200 KB |
| 89 | Used Size : 1827840 MB |
| 90 | Unused Size : 64 KB |
| 91 | Total Size : 1831420 MB |
| 92 | Write Cache : Enabled (write-back) |
| 93 | FRU : None |
| 94 | S.M.A.R.T. : No |
| 95 | S.M.A.R.T. warnings : 0 |
| 96 | Power State : Full rpm |
| 97 | Supported Power States : Full power,Powered off |
| 98 | SSD : Yes |
| 99 | Temperature : Not Supported |
| 100 | NCQ status : Enabled |
| 101 | ---------------------------------------------------------------- |
| 102 | Device Phy Information |
| 103 | ---------------------------------------------------------------- |
| 104 | Phy #0 |
| 105 | PHY Identifier : 0 |
| 106 | SAS Address : 5000 |
| 107 | Attached PHY Identifier : 14 |
| 108 | Attached SAS Address : 5000 |
| 109 | |
| 110 | Device #3 |
| 111 | Device is a Hard drive |
| 112 | State : Online |
| 113 | Block Size : 512 Bytes |
| 114 | Supported : Yes |
| 115 | Transfer Speed : SATA 6.0 Gb/s |
| 116 | Reported Channel,Device(T:L) : 0,19(19:0) |
| 117 | Reported Location : Enclosure 0, Slot 3( Connector Unknown ) |
| 118 | Reported ESD(T:L) : 2,0(0:0) |
| 119 | Vendor : ATA |
| 120 | Model : INTEL SSDSC2KB019T |
| 121 | Firmware : SCV10111 |
| 122 | Serial number : XXXXXXXXXXXXXXXXXX |
| 123 | Reserved Size : 3666200 KB |
| 124 | Used Size : 1827840 MB |
| 125 | Unused Size : 64 KB |
| 126 | Total Size : 1831420 MB |
| 127 | Write Cache : Enabled (write-back) |
| 128 | FRU : None |
| 129 | S.M.A.R.T. : No |
| 130 | S.M.A.R.T. warnings : 0 |
| 131 | Power State : Full rpm |
| 132 | Supported Power States : Full power,Powered off |
| 133 | SSD : Yes |
| 134 | Temperature : Not Supported |
| 135 | NCQ status : Enabled |
| 136 | ---------------------------------------------------------------- |
| 137 | Device Phy Information |
| 138 | ---------------------------------------------------------------- |
| 139 | Phy #0 |
| 140 | PHY Identifier : 0 |
| 141 | SAS Address : 5000 |
| 142 | Attached PHY Identifier : 15 |
| 143 | Attached SAS Address : 5000 |
| 144 | |
| 145 | Device #4 |
| 146 | Device is a Hard drive |
| 147 | State : Online |
| 148 | Block Size : 512 Bytes |
| 149 | Supported : Yes |
| 150 | Transfer Speed : SATA 6.0 Gb/s |
| 151 | Reported Channel,Device(T:L) : 0,20(20:0) |
| 152 | Reported Location : Enclosure 0, Slot 4( Connector Unknown ) |
| 153 | Reported ESD(T:L) : 2,0(0:0) |
| 154 | Vendor : ATA |
| 155 | Model : INTEL SSDSC2KB019T |
| 156 | Firmware : SCV10111 |
| 157 | Serial number : XXXXXXXXXXXXXXXXXX |
| 158 | Reserved Size : 3666200 KB |
| 159 | Used Size : 1827840 MB |
| 160 | Unused Size : 64 KB |
| 161 | Total Size : 1831420 MB |
| 162 | Write Cache : Enabled (write-back) |
| 163 | FRU : None |
| 164 | S.M.A.R.T. : No |
| 165 | S.M.A.R.T. warnings : 0 |
| 166 | Power State : Full rpm |
| 167 | Supported Power States : Full power,Powered off |
| 168 | SSD : Yes |
| 169 | Temperature : Not Supported |
| 170 | NCQ status : Enabled |
| 171 | ---------------------------------------------------------------- |
| 172 | Device Phy Information |
| 173 | ---------------------------------------------------------------- |
| 174 | Phy #0 |
| 175 | PHY Identifier : 0 |
| 176 | SAS Address : 5000 |
| 177 | Attached PHY Identifier : 16 |
| 178 | Attached SAS Address : 5000 |
| 179 | |
| 180 | Device #5 |
| 181 | Device is a Hard drive |
| 182 | State : Online |
| 183 | Block Size : 512 Bytes |
| 184 | Supported : Yes |
| 185 | Transfer Speed : SATA 6.0 Gb/s |
| 186 | Reported Channel,Device(T:L) : 0,21(21:0) |
| 187 | Reported Location : Enclosure 0, Slot 5( Connector Unknown ) |
| 188 | Reported ESD(T:L) : 2,0(0:0) |
| 189 | Vendor : ATA |
| 190 | Model : INTEL SSDSC2KB019T |
| 191 | Firmware : SCV10111 |
| 192 | Serial number : XXXXXXXXXXXXXXXXXX |
| 193 | Reserved Size : 3666200 KB |
| 194 | Used Size : 1827840 MB |
| 195 | Unused Size : 64 KB |
| 196 | Total Size : 1831420 MB |
| 197 | Write Cache : Enabled (write-back) |
| 198 | FRU : None |
| 199 | S.M.A.R.T. : No |
| 200 | S.M.A.R.T. warnings : 0 |
| 201 | Power State : Full rpm |
| 202 | Supported Power States : Full power,Powered off |
| 203 | SSD : Yes |
| 204 | Temperature : Not Supported |
| 205 | NCQ status : Enabled |
| 206 | ---------------------------------------------------------------- |
| 207 | Device Phy Information |
| 208 | ---------------------------------------------------------------- |
| 209 | Phy #0 |
| 210 | PHY Identifier : 0 |
| 211 | SAS Address : 5000 |
| 212 | Attached PHY Identifier : 17 |
| 213 | Attached SAS Address : 5000 |
| 214 | |
| 215 | Device #6 |
| 216 | Device is a Hard drive |
| 217 | State : Online |
| 218 | Block Size : 512 Bytes |
| 219 | Supported : Yes |
| 220 | Transfer Speed : SATA 6.0 Gb/s |
| 221 | Reported Channel,Device(T:L) : 0,22(22:0) |
| 222 | Reported Location : Enclosure 0, Slot 6( Connector Unknown ) |
| 223 | Reported ESD(T:L) : 2,0(0:0) |
| 224 | Vendor : ATA |
| 225 | Model : INTEL SSDSC2KB019T |
| 226 | Firmware : SCV10111 |
| 227 | Serial number : XXXXXXXXXXXXXXXXXX |
| 228 | Reserved Size : 3666200 KB |
| 229 | Used Size : 1827840 MB |
| 230 | Unused Size : 64 KB |
| 231 | Total Size : 1831420 MB |
| 232 | Write Cache : Enabled (write-back) |
| 233 | FRU : None |
| 234 | S.M.A.R.T. : No |
| 235 | S.M.A.R.T. warnings : 0 |
| 236 | Power State : Full rpm |
| 237 | Supported Power States : Full power,Powered off |
| 238 | SSD : Yes |
| 239 | Temperature : Not Supported |
| 240 | NCQ status : Enabled |
| 241 | ---------------------------------------------------------------- |
| 242 | Device Phy Information |
| 243 | ---------------------------------------------------------------- |
| 244 | Phy #0 |
| 245 | PHY Identifier : 0 |
| 246 | SAS Address : 5000 |
| 247 | Attached PHY Identifier : 18 |
| 248 | Attached SAS Address : 5000 |
| 249 | |
| 250 | Device #7 |
| 251 | Device is a Hard drive |
| 252 | State : Online |
| 253 | Block Size : 512 Bytes |
| 254 | Supported : Yes |
| 255 | Transfer Speed : SATA 6.0 Gb/s |
| 256 | Reported Channel,Device(T:L) : 0,23(23:0) |
| 257 | Reported Location : Enclosure 0, Slot 7( Connector Unknown ) |
| 258 | Reported ESD(T:L) : 2,0(0:0) |
| 259 | Vendor : ATA |
| 260 | Model : INTEL SSDSC2KB019T |
| 261 | Firmware : SCV10111 |
| 262 | Serial number : XXXXXXXXXXXXXXXXXX |
| 263 | Reserved Size : 3666200 KB |
| 264 | Used Size : 1827840 MB |
| 265 | Unused Size : 64 KB |
| 266 | Total Size : 1831420 MB |
| 267 | Write Cache : Enabled (write-back) |
| 268 | FRU : None |
| 269 | S.M.A.R.T. : No |
| 270 | S.M.A.R.T. warnings : 0 |
| 271 | Power State : Full rpm |
| 272 | Supported Power States : Full power,Powered off |
| 273 | SSD : Yes |
| 274 | Temperature : Not Supported |
| 275 | NCQ status : Enabled |
| 276 | ---------------------------------------------------------------- |
| 277 | Device Phy Information |
| 278 | ---------------------------------------------------------------- |
| 279 | Phy #0 |
| 280 | PHY Identifier : 0 |
| 281 | SAS Address : 5000 |
| 282 | Attached PHY Identifier : 19 |
| 283 | Attached SAS Address : 5000 |
| 284 | |
| 285 | Device #8 |
| 286 | Device is a Hard drive |
| 287 | State : Online |
| 288 | Block Size : 512 Bytes |
| 289 | Supported : Yes |
| 290 | Transfer Speed : SATA 6.0 Gb/s |
| 291 | Reported Channel,Device(T:L) : 0,24(24:0) |
| 292 | Reported Location : Enclosure 0, Slot 8( Connector Unknown ) |
| 293 | Reported ESD(T:L) : 2,0(0:0) |
| 294 | Vendor : ATA |
| 295 | Model : INTEL SSDSC2KB019T |
| 296 | Firmware : SCV10111 |
| 297 | Serial number : XXXXXXXXXXXXXXXXXX |
| 298 | Reserved Size : 3666200 KB |
| 299 | Used Size : 1827840 MB |
| 300 | Unused Size : 64 KB |
| 301 | Total Size : 1831420 MB |
| 302 | Write Cache : Enabled (write-back) |
| 303 | FRU : None |
| 304 | S.M.A.R.T. : No |
| 305 | S.M.A.R.T. warnings : 0 |
| 306 | Power State : Full rpm |
| 307 | Supported Power States : Full power,Powered off |
| 308 | SSD : Yes |
| 309 | Temperature : Not Supported |
| 310 | NCQ status : Enabled |
| 311 | ---------------------------------------------------------------- |
| 312 | Device Phy Information |
| 313 | ---------------------------------------------------------------- |
| 314 | Phy #0 |
| 315 | PHY Identifier : 0 |
| 316 | SAS Address : 5000 |
| 317 | Attached PHY Identifier : 20 |
| 318 | Attached SAS Address : 5000 |
| 319 | |
| 320 | Device #9 |
| 321 | Device is a Hard drive |
| 322 | State : Online |
| 323 | Block Size : 512 Bytes |
| 324 | Supported : Yes |
| 325 | Transfer Speed : SATA 6.0 Gb/s |
| 326 | Reported Channel,Device(T:L) : 0,25(25:0) |
| 327 | Reported Location : Enclosure 0, Slot 9( Connector Unknown ) |
| 328 | Reported ESD(T:L) : 2,0(0:0) |
| 329 | Vendor : ATA |
| 330 | Model : INTEL SSDSC2KB019T |
| 331 | Firmware : SCV10111 |
| 332 | Serial number : XXXXXXXXXXXXXXXXXX |
| 333 | Reserved Size : 3666200 KB |
| 334 | Used Size : 1827840 MB |
| 335 | Unused Size : 64 KB |
| 336 | Total Size : 1831420 MB |
| 337 | Write Cache : Enabled (write-back) |
| 338 | FRU : None |
| 339 | S.M.A.R.T. : No |
| 340 | S.M.A.R.T. warnings : 0 |
| 341 | Power State : Full rpm |
| 342 | Supported Power States : Full power,Powered off |
| 343 | SSD : Yes |
| 344 | Temperature : Not Supported |
| 345 | NCQ status : Enabled |
| 346 | ---------------------------------------------------------------- |
| 347 | Device Phy Information |
| 348 | ---------------------------------------------------------------- |
| 349 | Phy #0 |
| 350 | PHY Identifier : 0 |
| 351 | SAS Address : 5000 |
| 352 | Attached PHY Identifier : 21 |
| 353 | Attached SAS Address : 5000 |
| 354 | |
| 355 | Device #10 |
| 356 | Device is a Hard drive |
| 357 | State : Global Hot-Spare |
| 358 | Block Size : 512 Bytes |
| 359 | Supported : Yes |
| 360 | Transfer Speed : SATA 6.0 Gb/s |
| 361 | Reported Channel,Device(T:L) : 0,26(26:0) |
| 362 | Reported Location : Enclosure 0, Slot 10( Connector Unknown ) |
| 363 | Reported ESD(T:L) : 2,0(0:0) |
| 364 | Vendor : ATA |
| 365 | Model : INTEL SSDSC2KB019T |
| 366 | Firmware : SCV10111 |
| 367 | Serial number : XXXXXXXXXXXXXXXXXX |
| 368 | Reserved Size : 3666200 KB |
| 369 | Used Size : 1827840 MB |
| 370 | Unused Size : 64 KB |
| 371 | Total Size : 1831420 MB |
| 372 | Write Cache : Enabled (write-back) |
| 373 | FRU : None |
| 374 | S.M.A.R.T. : No |
| 375 | S.M.A.R.T. warnings : 0 |
| 376 | Power State : Full rpm |
| 377 | Supported Power States : Full power,Powered off |
| 378 | SSD : Yes |
| 379 | Temperature : Not Supported |
| 380 | NCQ status : Enabled |
| 381 | ---------------------------------------------------------------- |
| 382 | Device Phy Information |
| 383 | ---------------------------------------------------------------- |
| 384 | Phy #0 |
| 385 | PHY Identifier : 0 |
| 386 | SAS Address : 5000 |
| 387 | Attached PHY Identifier : 22 |
| 388 | Attached SAS Address : 5000 |
| 389 | |
| 390 | Device #11 |
| 391 | Device is a Hard drive |
| 392 | State : Global Hot-Spare |
| 393 | Block Size : 512 Bytes |
| 394 | Supported : Yes |
| 395 | Transfer Speed : SATA 6.0 Gb/s |
| 396 | Reported Channel,Device(T:L) : 0,27(27:0) |
| 397 | Reported Location : Enclosure 0, Slot 11( Connector Unknown ) |
| 398 | Reported ESD(T:L) : 2,0(0:0) |
| 399 | Vendor : ATA |
| 400 | Model : INTEL SSDSC2KB019T |
| 401 | Firmware : SCV10111 |
| 402 | Serial number : XXXXXXXXXXXXXXXXXX |
| 403 | Reserved Size : 3666200 KB |
| 404 | Used Size : 1827840 MB |
| 405 | Unused Size : 64 KB |
| 406 | Total Size : 1831420 MB |
| 407 | Write Cache : Enabled (write-back) |
| 408 | FRU : None |
| 409 | S.M.A.R.T. : No |
| 410 | S.M.A.R.T. warnings : 0 |
| 411 | Power State : Full rpm |
| 412 | Supported Power States : Full power,Powered off |
| 413 | SSD : Yes |
| 414 | Temperature : Not Supported |
| 415 | NCQ status : Enabled |
| 416 | ---------------------------------------------------------------- |
| 417 | Device Phy Information |
| 418 | ---------------------------------------------------------------- |
| 419 | Phy #0 |
| 420 | PHY Identifier : 0 |
| 421 | SAS Address : 5000 |
| 422 | Attached PHY Identifier : 23 |
| 423 | Attached SAS Address : 5000 |
| 424 | |
| 425 | Device #12 |
| 426 | Device is an Enclosure Services Device |
| 427 | Reported Channel,Device(T:L) : 2,0(0:0) |
| 428 | Enclosure ID : 0 |
| 429 | Enclosure Logical Identifier : 5000 |
| 430 | Expander ID : 0 |
| 431 | Expander SAS Address : 5000 |
| 432 | Type : SES2 |
| 433 | Vendor : LSI CORP |
| 434 | Model : SAS2X28 |
| 435 | Firmware : 0717 |
| 436 | Status of Enclosure Services Device |
| 437 | Fan 1 status : 0 rpm (Not Installed) |
| 438 | Fan 2 status : 0 rpm (Not Installed) |
| 439 | Fan 3 status : 0 rpm (Not Installed) |
| 440 | Power supply 1 status : Not Installed |
| 441 | Power supply 2 status : Not Installed |
| 442 | Temperature Sensor Status 1 : 24 C/ 75 F (Normal) |
| 443 | Speaker status : On |
| 444 | |
| 445 | |
| 446 | Command completed successfully. |