| 1 | /* |
| 2 | * LEFI (a UEFI-like interface for BIOS-Kernel boot parameters) data structures |
| 3 | * defined at arch/mips/include/asm/mach-loongson64/boot_param.h in Linux kernel |
| 4 | * |
| 5 | * Copyright (c) 2017-2020 Huacai Chen (chenhc@lemote.com) |
| 6 | * Copyright (c) 2017-2020 Jiaxun Yang <jiaxun.yang@flygoat.com> |
| 7 | * |
| 8 | * This program is free software: you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License as published by |
| 10 | * the Free Software Foundation, either version 2 of the License, or |
| 11 | * (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program. If not, see <https://www.gnu.org/licenses/>. |
| 20 | */ |
| 21 | |
| 22 | #ifndef HW_MIPS_LOONGSON3_BOOTP_H |
| 23 | #define HW_MIPS_LOONGSON3_BOOTP_H |
| 24 | |
| 25 | struct efi_memory_map_loongson { |
| 26 | uint16_t vers; /* version of efi_memory_map */ |
| 27 | uint32_t nr_map; /* number of memory_maps */ |
| 28 | uint32_t mem_freq; /* memory frequency */ |
| 29 | struct mem_map { |
| 30 | uint32_t node_id; /* node_id which memory attached to */ |
| 31 | uint32_t mem_type; /* system memory, pci memory, pci io, etc. */ |
| 32 | uint64_t mem_start; /* memory map start address */ |
| 33 | uint32_t mem_size; /* each memory_map size, not the total size */ |
| 34 | } map[128]; |
| 35 | } QEMU_PACKED; |
| 36 | |
| 37 | enum loongson_cpu_type { |
| 38 | Legacy_2E = 0x0, |
| 39 | Legacy_2F = 0x1, |
| 40 | Legacy_3A = 0x2, |
| 41 | Legacy_3B = 0x3, |
| 42 | Legacy_1A = 0x4, |
| 43 | Legacy_1B = 0x5, |
| 44 | Legacy_2G = 0x6, |
| 45 | Legacy_2H = 0x7, |
| 46 | Loongson_1A = 0x100, |
| 47 | Loongson_1B = 0x101, |
| 48 | Loongson_2E = 0x200, |
| 49 | Loongson_2F = 0x201, |
| 50 | Loongson_2G = 0x202, |
| 51 | Loongson_2H = 0x203, |
| 52 | Loongson_3A = 0x300, |
| 53 | Loongson_3B = 0x301 |
| 54 | }; |
| 55 | |
| 56 | /* |
| 57 | * Capability and feature descriptor structure for MIPS CPU |
| 58 | */ |
| 59 | struct efi_cpuinfo_loongson { |
| 60 | uint16_t vers; /* version of efi_cpuinfo_loongson */ |
| 61 | uint32_t processor_id; /* PRID, e.g. 6305, 6306 */ |
| 62 | uint32_t cputype; /* Loongson_3A/3B, etc. */ |
| 63 | uint32_t total_node; /* num of total numa nodes */ |
| 64 | uint16_t cpu_startup_core_id; /* Boot core id */ |
| 65 | uint16_t reserved_cores_mask; |
| 66 | uint32_t cpu_clock_freq; /* cpu_clock */ |
| 67 | uint32_t nr_cpus; |
| 68 | char cpuname[64]; |
| 69 | } QEMU_PACKED; |
| 70 | |
| 71 | #define MAX_UARTS 64 |
| 72 | struct uart_device { |
| 73 | uint32_t iotype; |
| 74 | uint32_t uartclk; |
| 75 | uint32_t int_offset; |
| 76 | uint64_t uart_base; |
| 77 | } QEMU_PACKED; |
| 78 | |
| 79 | #define MAX_SENSORS 64 |
| 80 | #define SENSOR_TEMPER 0x00000001 |
| 81 | #define SENSOR_VOLTAGE 0x00000002 |
| 82 | #define SENSOR_FAN 0x00000004 |
| 83 | struct sensor_device { |
| 84 | char name[32]; /* a formal name */ |
| 85 | char label[64]; /* a flexible description */ |
| 86 | uint32_t type; /* SENSOR_* */ |
| 87 | uint32_t id; /* instance id of a sensor-class */ |
| 88 | uint32_t fan_policy; /* step speed or constant speed */ |
| 89 | uint32_t fan_percent;/* only for constant speed policy */ |
| 90 | uint64_t base_addr; /* base address of device registers */ |
| 91 | } QEMU_PACKED; |
| 92 | |
| 93 | struct system_loongson { |
| 94 | uint16_t vers; /* version of system_loongson */ |
| 95 | uint32_t ccnuma_smp; /* 0: no numa; 1: has numa */ |
| 96 | uint32_t sing_double_channel;/* 1: single; 2: double */ |
| 97 | uint32_t nr_uarts; |
| 98 | struct uart_device uarts[MAX_UARTS]; |
| 99 | uint32_t nr_sensors; |
| 100 | struct sensor_device sensors[MAX_SENSORS]; |
| 101 | char has_ec; |
| 102 | char ec_name[32]; |
| 103 | uint64_t ec_base_addr; |
| 104 | char has_tcm; |
| 105 | char tcm_name[32]; |
| 106 | uint64_t tcm_base_addr; |
| 107 | uint64_t workarounds; |
| 108 | uint64_t of_dtb_addr; /* NULL if not support */ |
| 109 | } QEMU_PACKED; |
| 110 | |
| 111 | struct irq_source_routing_table { |
| 112 | uint16_t vers; |
| 113 | uint16_t size; |
| 114 | uint16_t rtr_bus; |
| 115 | uint16_t rtr_devfn; |
| 116 | uint32_t vendor; |
| 117 | uint32_t device; |
| 118 | uint32_t PIC_type; /* conform use HT or PCI to route to CPU-PIC */ |
| 119 | uint64_t ht_int_bit; /* 3A: 1<<24; 3B: 1<<16 */ |
| 120 | uint64_t ht_enable; /* irqs used in this PIC */ |
| 121 | uint32_t node_id; /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */ |
| 122 | uint64_t pci_mem_start_addr; |
| 123 | uint64_t pci_mem_end_addr; |
| 124 | uint64_t pci_io_start_addr; |
| 125 | uint64_t pci_io_end_addr; |
| 126 | uint64_t pci_config_addr; |
| 127 | uint16_t dma_mask_bits; |
| 128 | uint16_t dma_noncoherent; |
| 129 | } QEMU_PACKED; |
| 130 | |
| 131 | struct interface_info { |
| 132 | uint16_t vers; /* version of the specificition */ |
| 133 | uint16_t size; |
| 134 | uint8_t flag; |
| 135 | char description[64]; |
| 136 | } QEMU_PACKED; |
| 137 | |
| 138 | #define MAX_RESOURCE_NUMBER 128 |
| 139 | struct resource_loongson { |
| 140 | uint64_t start; /* resource start address */ |
| 141 | uint64_t end; /* resource end address */ |
| 142 | char name[64]; |
| 143 | uint32_t flags; |
| 144 | }; |
| 145 | |
| 146 | struct archdev_data {}; /* arch specific additions */ |
| 147 | |
| 148 | struct board_devices { |
| 149 | char name[64]; /* hold the device name */ |
| 150 | uint32_t num_resources; /* number of device_resource */ |
| 151 | /* for each device's resource */ |
| 152 | struct resource_loongson resource[MAX_RESOURCE_NUMBER]; |
| 153 | /* arch specific additions */ |
| 154 | struct archdev_data archdata; |
| 155 | }; |
| 156 | |
| 157 | struct loongson_special_attribute { |
| 158 | uint16_t vers; /* version of this special */ |
| 159 | char special_name[64]; /* special_attribute_name */ |
| 160 | uint32_t loongson_special_type; /* type of special device */ |
| 161 | /* for each device's resource */ |
| 162 | struct resource_loongson resource[MAX_RESOURCE_NUMBER]; |
| 163 | }; |
| 164 | |
| 165 | struct loongson_params { |
| 166 | uint64_t memory_offset; /* efi_memory_map_loongson struct offset */ |
| 167 | uint64_t cpu_offset; /* efi_cpuinfo_loongson struct offset */ |
| 168 | uint64_t system_offset; /* system_loongson struct offset */ |
| 169 | uint64_t irq_offset; /* irq_source_routing_table struct offset */ |
| 170 | uint64_t interface_offset; /* interface_info struct offset */ |
| 171 | uint64_t special_offset; /* loongson_special_attribute struct offset */ |
| 172 | uint64_t boarddev_table_offset; /* board_devices offset */ |
| 173 | }; |
| 174 | |
| 175 | struct smbios_tables { |
| 176 | uint16_t vers; /* version of smbios */ |
| 177 | uint64_t vga_bios; /* vga_bios address */ |
| 178 | struct loongson_params lp; |
| 179 | }; |
| 180 | |
| 181 | struct efi_reset_system_t { |
| 182 | uint64_t ResetCold; |
| 183 | uint64_t ResetWarm; |
| 184 | uint64_t ResetType; |
| 185 | uint64_t Shutdown; |
| 186 | uint64_t DoSuspend; /* NULL if not support */ |
| 187 | }; |
| 188 | |
| 189 | struct efi_loongson { |
| 190 | uint64_t mps; /* MPS table */ |
| 191 | uint64_t acpi; /* ACPI table (IA64 ext 0.71) */ |
| 192 | uint64_t acpi20; /* ACPI table (ACPI 2.0) */ |
| 193 | struct smbios_tables smbios; /* SM BIOS table */ |
| 194 | uint64_t sal_systab; /* SAL system table */ |
| 195 | uint64_t boot_info; /* boot info table */ |
| 196 | }; |
| 197 | |
| 198 | struct boot_params { |
| 199 | struct efi_loongson efi; |
| 200 | struct efi_reset_system_t reset_system; |
| 201 | }; |
| 202 | |
| 203 | #define LOONGSON3_CORE_PER_NODE 4 |
| 204 | |
| 205 | /* Overall MMIO & Memory layout */ |
| 206 | enum { |
| 207 | VIRT_LOWMEM, |
| 208 | VIRT_PM, |
| 209 | VIRT_FW_CFG, |
| 210 | VIRT_RTC, |
| 211 | VIRT_PCIE_PIO, |
| 212 | VIRT_PCIE_ECAM, |
| 213 | VIRT_BIOS_ROM, |
| 214 | VIRT_UART, |
| 215 | VIRT_LIOINTC, |
| 216 | VIRT_IPI, |
| 217 | VIRT_PCIE_MMIO, |
| 218 | VIRT_HIGHMEM |
| 219 | }; |
| 220 | |
| 221 | /* Low MEM layout for QEMU kernel loader */ |
| 222 | enum { |
| 223 | LOADER_KERNEL, |
| 224 | LOADER_INITRD, |
| 225 | LOADER_CMDLINE |
| 226 | }; |
| 227 | |
| 228 | /* BIOS ROM layout for QEMU kernel loader */ |
| 229 | enum { |
| 230 | LOADER_BOOTROM, |
| 231 | LOADER_PARAM, |
| 232 | }; |
| 233 | |
| 234 | extern const MemMapEntry virt_memmap[]; |
| 235 | void init_loongson_params(struct loongson_params *lp, void *p, |
| 236 | uint32_t cpu_count, uint32_t processor_id, |
| 237 | uint64_t cpu_freq, uint64_t ram_size); |
| 238 | void init_reset_system(struct efi_reset_system_t *reset); |
| 239 | |
| 240 | #endif |