| 1 | # See docs/devel/tracing.rst for syntax documentation. |
| 2 | |
| 3 | # allwinner-sdhost.c |
| 4 | allwinner_sdhost_set_inserted(bool inserted) "inserted %u" |
| 5 | allwinner_sdhost_process_desc(uint64_t desc_addr, uint32_t desc_size, bool is_write, uint32_t max_bytes) "desc_addr 0x%" PRIx64 " desc_size %" PRIu32 " is_write %u max_bytes %" PRIu32 |
| 6 | allwinner_sdhost_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 |
| 7 | allwinner_sdhost_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 |
| 8 | allwinner_sdhost_update_irq(uint32_t irq) "IRQ bits 0x%" PRIx32 |
| 9 | |
| 10 | # bcm2835_sdhost.c |
| 11 | bcm2835_sdhost_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" |
| 12 | bcm2835_sdhost_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" |
| 13 | bcm2835_sdhost_edm_change(const char *why, uint32_t edm) "(%s) EDM now 0x%x" |
| 14 | bcm2835_sdhost_update_irq(uint32_t irq) "IRQ bits 0x%x" |
| 15 | |
| 16 | # core.c |
| 17 | sdbus_command(const char *bus_name, uint8_t cmd, uint32_t arg) "@%s CMD%02d arg 0x%08x" |
| 18 | sdbus_read(const char *bus_name, const char *hexdump) "@%s data %s" |
| 19 | sdbus_write(const char *bus_name, const char *hexdump) "@%s data %s" |
| 20 | sdbus_set_voltage(const char *bus_name, uint16_t millivolts) "@%s %u (mV)" |
| 21 | sdbus_get_dat_lines(const char *bus_name, uint8_t dat_lines) "@%s dat_lines: %u" |
| 22 | sdbus_get_cmd_line(const char *bus_name, bool cmd_line) "@%s cmd_line: %u" |
| 23 | |
| 24 | # sdhci.c |
| 25 | sdhci_set_inserted(const char *level) "card state changed: %s" |
| 26 | sdhci_send_command(uint8_t cmd, uint32_t arg) "CMD%02u ARG[0x%08x]" |
| 27 | sdhci_error(const char *msg) "%s" |
| 28 | sdhci_response4(uint32_t r0) "RSPREG[31..0]=0x%08x" |
| 29 | sdhci_response16(uint32_t r3, uint32_t r2, uint32_t r1, uint32_t r0) "RSPREG[127..96]=0x%08x, RSPREG[95..64]=0x%08x, RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x" |
| 30 | sdhci_end_transfer(uint8_t cmd, uint32_t arg) "Automatically issue CMD%02u 0x%08x" |
| 31 | sdhci_adma(const char *desc, uint32_t sysad) "%s: admasysaddr=0x%" PRIx32 |
| 32 | sdhci_adma_loop(uint64_t addr, uint16_t length, uint8_t attr) "addr=0x%08" PRIx64 ", len=%d, attr=0x%x" |
| 33 | sdhci_adma_transfer_completed(void) "" |
| 34 | sdhci_access(const char *access, unsigned int size, uint64_t offset, const char *dir, uint64_t val, uint64_t val2) "%s%u: addr[0x%04" PRIx64 "] %s 0x%08" PRIx64 " (%" PRIu64 ")" |
| 35 | sdhci_read_dataport(uint16_t data_count) "all %u bytes of data have been read from input buffer" |
| 36 | sdhci_write_dataport(uint16_t data_count) "write buffer filled with %u bytes of data" |
| 37 | sdhci_capareg(const char *desc, uint16_t val) "%s: %u" |
| 38 | |
| 39 | # sd.c |
| 40 | sdcard_normal_command(const char *proto, const char *cmd_desc, uint8_t cmd, uint32_t arg, const char *mode, const char *state) "%s %20s/ CMD%02d arg 0x%08x (mode %s, state %s)" |
| 41 | sdcard_app_command(const char *proto, const char *acmd_desc, uint8_t acmd, uint32_t arg, const char *mode, const char *state) "%s %23s/ACMD%02d arg 0x%08x (mode %s, state %s)" |
| 42 | sdcard_response(const char *rspdesc, int rsplen) "%s (sz:%d)" |
| 43 | sdcard_powerup(void) "" |
| 44 | sdcard_inquiry_cmd41(void) "" |
| 45 | sdcard_reset(void) "" |
| 46 | sdcard_set_rca(uint16_t value) "new RCA: 0x%04x" |
| 47 | sdcard_set_blocklen(uint16_t length) "block len 0x%03x" |
| 48 | sdcard_set_block_count(uint32_t cnt) "block cnt 0x%"PRIx32 |
| 49 | sdcard_inserted(bool readonly) "read_only: %u" |
| 50 | sdcard_ejected(void) "" |
| 51 | sdcard_erase(uint32_t first, uint32_t last) "addr first 0x%" PRIx32" last 0x%" PRIx32 |
| 52 | sdcard_lock(void) "" |
| 53 | sdcard_unlock(void) "" |
| 54 | sdcard_req_addr(uint32_t req_arg, uint64_t addr) "req 0x%" PRIx32 " addr 0x%" PRIx64 |
| 55 | sdcard_read_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x" |
| 56 | sdcard_write_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x" |
| 57 | sdcard_write_data(const char *proto, const char *cmd_desc, uint8_t cmd, uint32_t offset, const char *hexdump) "%s %20s/ CMD%02d ofs %"PRIu32" data %s" |
| 58 | sdcard_read_data(const char *proto, const char *cmd_desc, uint8_t cmd, uint32_t offset, uint64_t size, uint32_t blklen) "%s %20s/ CMD%02d ofs %"PRIu32" size %"PRIu64" blklen %" PRIu32 |
| 59 | sdcard_set_voltage(uint16_t millivolts) "%u mV" |
| 60 | sdcard_ext_csd_update(unsigned index, uint8_t oval, uint8_t nval) "index %u: 0x%02x -> 0x%02x" |
| 61 | sdcard_switch(unsigned access, unsigned index, unsigned value, unsigned set) "acc:%u idx:%u val:%u set:%u" |
| 62 | sdcard_rpmb_read_block(uint16_t resp, uint16_t read_addr, uint16_t result) "resp 0x%x read_addr 0x%x result 0x%x" |
| 63 | sdcard_rpmb_write_block(uint16_t req, uint16_t result) "req 0x%x result 0x%x" |
| 64 | |
| 65 | # pl181.c |
| 66 | pl181_command_send(uint8_t cmd, uint32_t arg) "sending CMD%02d arg 0x%08" PRIx32 |
| 67 | pl181_command_sent(void) "command sent" |
| 68 | pl181_command_response_pending(void) "response received" |
| 69 | pl181_command_timeout(void) "command timeouted" |
| 70 | pl181_fifo_push(uint32_t data) "FIFO push 0x%08" PRIx32 |
| 71 | pl181_fifo_pop(uint32_t data) "FIFO pop 0x%08" PRIx32 |
| 72 | pl181_fifo_transfer_complete(void) "FIFO transfer complete" |
| 73 | pl181_data_engine_idle(void) "data engine idle" |
| 74 | |
| 75 | # aspeed_sdhci.c |
| 76 | aspeed_sdhci_read(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 |
| 77 | aspeed_sdhci_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 |