| 1 | #!/bin/sh |
| 2 | # |
| 3 | # Copyright (c) 2005 Junio C Hamano |
| 4 | # |
| 5 | |
| 6 | test_description='Test the very basics part #1. |
| 7 | |
| 8 | The rest of the test suite does not check the basic operation of git |
| 9 | plumbing commands to work very carefully. Their job is to concentrate |
| 10 | on tricky features that caused bugs in the past to detect regression. |
| 11 | |
| 12 | This test runs very basic features, like registering things in cache, |
| 13 | writing tree, etc. |
| 14 | |
| 15 | Note that this test *deliberately* hard-codes many expected object |
| 16 | IDs. When object ID computation changes, like in the previous case of |
| 17 | swapping compression and hashing order, the person who is making the |
| 18 | modification *should* take notice and update the test vectors here. |
| 19 | ' |
| 20 | |
| 21 | . ./test-lib.sh |
| 22 | . "$TEST_DIRECTORY"/lib-subtest.sh |
| 23 | |
| 24 | try_local_xy () { |
| 25 | local x="local" y="alsolocal" && |
| 26 | echo "$x $y" |
| 27 | } |
| 28 | |
| 29 | # Check whether the shell supports the "local" keyword. "local" is not |
| 30 | # POSIX-standard, but it is very widely supported by POSIX-compliant |
| 31 | # shells, and we rely on it within Git's test framework. |
| 32 | # |
| 33 | # If your shell fails this test, the results of other tests may be |
| 34 | # unreliable. You may wish to report the problem to the Git mailing |
| 35 | # list <git@vger.kernel.org>, as it could cause us to reconsider |
| 36 | # relying on "local". |
| 37 | test_expect_success 'verify that the running shell supports "local"' ' |
| 38 | x="notlocal" && |
| 39 | y="alsonotlocal" && |
| 40 | echo "local alsolocal" >expected1 && |
| 41 | try_local_xy >actual1 && |
| 42 | test_cmp expected1 actual1 && |
| 43 | echo "notlocal alsonotlocal" >expected2 && |
| 44 | echo "$x $y" >actual2 && |
| 45 | test_cmp expected2 actual2 |
| 46 | ' |
| 47 | |
| 48 | ################################################################ |
| 49 | # git init has been done in an empty repository. |
| 50 | # make sure it is empty. |
| 51 | |
| 52 | test_expect_success '.git/objects should be empty after git init in an empty repo' ' |
| 53 | find .git/objects -type f -print >should-be-empty && |
| 54 | test_line_count = 0 should-be-empty |
| 55 | ' |
| 56 | |
| 57 | # also it should have 2 subdirectories; no fan-out anymore, pack, and info. |
| 58 | # 3 is counting "objects" itself |
| 59 | test_expect_success '.git/objects should have 3 subdirectories' ' |
| 60 | find .git/objects -type d -print >full-of-directories && |
| 61 | test_line_count = 3 full-of-directories |
| 62 | ' |
| 63 | |
| 64 | ################################################################ |
| 65 | # Test harness |
| 66 | test_expect_success 'success is reported like this' ' |
| 67 | : |
| 68 | ' |
| 69 | |
| 70 | test_expect_success 'subtest: 3 passing tests' ' |
| 71 | write_and_run_sub_test_lib_test full-pass <<-\EOF && |
| 72 | for i in 1 2 3 |
| 73 | do |
| 74 | test_expect_success "passing test #$i" "true" |
| 75 | done |
| 76 | test_done |
| 77 | EOF |
| 78 | check_sub_test_lib_test full-pass <<-\EOF |
| 79 | > ok 1 - passing test #1 |
| 80 | > ok 2 - passing test #2 |
| 81 | > ok 3 - passing test #3 |
| 82 | > # passed all 3 test(s) |
| 83 | > 1..3 |
| 84 | EOF |
| 85 | ' |
| 86 | |
| 87 | test_expect_success 'subtest: 2/3 tests passing' ' |
| 88 | write_and_run_sub_test_lib_test_err partial-pass <<-\EOF && |
| 89 | test_expect_success "passing test #1" "true" |
| 90 | test_expect_success "failing test #2" "false" |
| 91 | test_expect_success "passing test #3" "true" |
| 92 | test_done |
| 93 | EOF |
| 94 | check_sub_test_lib_test partial-pass <<-\EOF |
| 95 | > ok 1 - passing test #1 |
| 96 | > not ok 2 - failing test #2 |
| 97 | # false |
| 98 | > ok 3 - passing test #3 |
| 99 | > # failed 1 among 3 test(s) |
| 100 | > 1..3 |
| 101 | EOF |
| 102 | ' |
| 103 | |
| 104 | test_expect_success 'subtest: --immediate' ' |
| 105 | run_sub_test_lib_test_err partial-pass \ |
| 106 | --immediate && |
| 107 | check_sub_test_lib_test_err partial-pass \ |
| 108 | <<-\EOF_OUT 3<<-EOF_ERR |
| 109 | > ok 1 - passing test #1 |
| 110 | > not ok 2 - failing test #2 |
| 111 | > # false |
| 112 | > 1..2 |
| 113 | EOF_OUT |
| 114 | EOF_ERR |
| 115 | ' |
| 116 | |
| 117 | test_expect_success 'subtest: a failing TODO test' ' |
| 118 | write_and_run_sub_test_lib_test failing-todo <<-\EOF && |
| 119 | test_expect_success "passing test" "true" |
| 120 | test_expect_failure "pretend we have a known breakage" "false" |
| 121 | test_done |
| 122 | EOF |
| 123 | check_sub_test_lib_test failing-todo <<-\EOF |
| 124 | > ok 1 - passing test |
| 125 | > not ok 2 - pretend we have a known breakage # TODO known breakage |
| 126 | > # still have 1 known breakage(s) |
| 127 | > # passed all remaining 1 test(s) |
| 128 | > 1..2 |
| 129 | EOF |
| 130 | ' |
| 131 | |
| 132 | test_expect_success 'subtest: a passing TODO test' ' |
| 133 | write_and_run_sub_test_lib_test_err passing-todo <<-\EOF && |
| 134 | test_expect_failure "pretend we have fixed a known breakage" "true" |
| 135 | test_done |
| 136 | EOF |
| 137 | check_sub_test_lib_test passing-todo <<-\EOF |
| 138 | > ok 1 - pretend we have fixed a known breakage # TODO known breakage vanished |
| 139 | > # 1 known breakage(s) vanished; please update test(s) |
| 140 | > 1..1 |
| 141 | EOF |
| 142 | ' |
| 143 | |
| 144 | test_expect_success 'subtest: 2 TODO tests, one passin' ' |
| 145 | write_and_run_sub_test_lib_test_err partially-passing-todos <<-\EOF && |
| 146 | test_expect_failure "pretend we have a known breakage" "false" |
| 147 | test_expect_success "pretend we have a passing test" "true" |
| 148 | test_expect_failure "pretend we have fixed another known breakage" "true" |
| 149 | test_done |
| 150 | EOF |
| 151 | check_sub_test_lib_test partially-passing-todos <<-\EOF |
| 152 | > not ok 1 - pretend we have a known breakage # TODO known breakage |
| 153 | > ok 2 - pretend we have a passing test |
| 154 | > ok 3 - pretend we have fixed another known breakage # TODO known breakage vanished |
| 155 | > # 1 known breakage(s) vanished; please update test(s) |
| 156 | > # still have 1 known breakage(s) |
| 157 | > # passed all remaining 1 test(s) |
| 158 | > 1..3 |
| 159 | EOF |
| 160 | ' |
| 161 | |
| 162 | test_expect_success 'subtest: mixed results: pass, failure and a TODO test' ' |
| 163 | write_and_run_sub_test_lib_test_err mixed-results1 <<-\EOF && |
| 164 | test_expect_success "passing test" "true" |
| 165 | test_expect_success "failing test" "false" |
| 166 | test_expect_failure "pretend we have a known breakage" "false" |
| 167 | test_done |
| 168 | EOF |
| 169 | check_sub_test_lib_test mixed-results1 <<-\EOF |
| 170 | > ok 1 - passing test |
| 171 | > not ok 2 - failing test |
| 172 | > # false |
| 173 | > not ok 3 - pretend we have a known breakage # TODO known breakage |
| 174 | > # still have 1 known breakage(s) |
| 175 | > # failed 1 among remaining 2 test(s) |
| 176 | > 1..3 |
| 177 | EOF |
| 178 | ' |
| 179 | |
| 180 | test_expect_success 'subtest: mixed results: a mixture of all possible results' ' |
| 181 | write_and_run_sub_test_lib_test_err mixed-results2 <<-\EOF && |
| 182 | test_expect_success "passing test" "true" |
| 183 | test_expect_success "passing test" "true" |
| 184 | test_expect_success "passing test" "true" |
| 185 | test_expect_success "passing test" "true" |
| 186 | test_expect_success "failing test" "false" |
| 187 | test_expect_success "failing test" "false" |
| 188 | test_expect_success "failing test" "false" |
| 189 | test_expect_failure "pretend we have a known breakage" "false" |
| 190 | test_expect_failure "pretend we have a known breakage" "false" |
| 191 | test_expect_failure "pretend we have fixed a known breakage" "true" |
| 192 | test_done |
| 193 | EOF |
| 194 | check_sub_test_lib_test mixed-results2 <<-\EOF |
| 195 | > ok 1 - passing test |
| 196 | > ok 2 - passing test |
| 197 | > ok 3 - passing test |
| 198 | > ok 4 - passing test |
| 199 | > not ok 5 - failing test |
| 200 | > # false |
| 201 | > not ok 6 - failing test |
| 202 | > # false |
| 203 | > not ok 7 - failing test |
| 204 | > # false |
| 205 | > not ok 8 - pretend we have a known breakage # TODO known breakage |
| 206 | > not ok 9 - pretend we have a known breakage # TODO known breakage |
| 207 | > ok 10 - pretend we have fixed a known breakage # TODO known breakage vanished |
| 208 | > # 1 known breakage(s) vanished; please update test(s) |
| 209 | > # still have 2 known breakage(s) |
| 210 | > # failed 3 among remaining 7 test(s) |
| 211 | > 1..10 |
| 212 | EOF |
| 213 | ' |
| 214 | |
| 215 | test_expect_success 'subtest: --verbose option' ' |
| 216 | write_and_run_sub_test_lib_test_err t1234-verbose --verbose <<-\EOF && |
| 217 | test_expect_success "passing test" true |
| 218 | test_expect_success "test with output" "echo foo" |
| 219 | test_expect_success "failing test" false |
| 220 | test_done |
| 221 | EOF |
| 222 | mv t1234-verbose/err t1234-verbose/err+ && |
| 223 | grep -v "^Initialized empty" t1234-verbose/err+ >t1234-verbose/err && |
| 224 | check_sub_test_lib_test_err t1234-verbose \ |
| 225 | <<-\EOF_OUT 3<<-\EOF_ERR |
| 226 | > ok 1 - passing test |
| 227 | > ok 2 - test with output |
| 228 | > not ok 3 - failing test |
| 229 | > # false |
| 230 | > # failed 1 among 3 test(s) |
| 231 | > 1..3 |
| 232 | EOF_OUT |
| 233 | > expecting success of 1234.1 '\''passing test'\'': true |
| 234 | > Z |
| 235 | > expecting success of 1234.2 '\''test with output'\'': echo foo |
| 236 | > foo |
| 237 | > Z |
| 238 | > expecting success of 1234.3 '\''failing test'\'': false |
| 239 | > Z |
| 240 | EOF_ERR |
| 241 | ' |
| 242 | |
| 243 | test_expect_success 'subtest: --verbose-only option' ' |
| 244 | run_sub_test_lib_test_err \ |
| 245 | t1234-verbose \ |
| 246 | --verbose-only=2 && |
| 247 | check_sub_test_lib_test_err t1234-verbose <<-\EOF_OUT 3<<-\EOF_ERR |
| 248 | > ok 1 - passing test |
| 249 | > ok 2 - test with output |
| 250 | > not ok 3 - failing test |
| 251 | > # false |
| 252 | > # failed 1 among 3 test(s) |
| 253 | > 1..3 |
| 254 | EOF_OUT |
| 255 | > Z |
| 256 | > expecting success of 1234.2 '\''test with output'\'': echo foo |
| 257 | > foo |
| 258 | > Z |
| 259 | EOF_ERR |
| 260 | ' |
| 261 | |
| 262 | test_expect_success 'subtest: skip one with GIT_SKIP_TESTS' ' |
| 263 | ( |
| 264 | run_sub_test_lib_test full-pass \ |
| 265 | --skip="full.2" && |
| 266 | check_sub_test_lib_test full-pass <<-\EOF |
| 267 | > ok 1 - passing test #1 |
| 268 | > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) |
| 269 | > ok 3 - passing test #3 |
| 270 | > # passed all 3 test(s) |
| 271 | > 1..3 |
| 272 | EOF |
| 273 | ) |
| 274 | ' |
| 275 | |
| 276 | test_expect_success 'subtest: skip several with GIT_SKIP_TESTS' ' |
| 277 | ( |
| 278 | write_and_run_sub_test_lib_test git-skip-tests-several \ |
| 279 | --skip="git.2 git.5" <<-\EOF && |
| 280 | for i in 1 2 3 4 5 6 |
| 281 | do |
| 282 | test_expect_success "passing test #$i" "true" |
| 283 | done |
| 284 | test_done |
| 285 | EOF |
| 286 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 287 | > ok 1 - passing test #1 |
| 288 | > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) |
| 289 | > ok 3 - passing test #3 |
| 290 | > ok 4 - passing test #4 |
| 291 | > ok 5 # skip passing test #5 (GIT_SKIP_TESTS) |
| 292 | > ok 6 - passing test #6 |
| 293 | > # passed all 6 test(s) |
| 294 | > 1..6 |
| 295 | EOF |
| 296 | ) |
| 297 | ' |
| 298 | |
| 299 | test_expect_success 'subtest: sh pattern skipping with GIT_SKIP_TESTS' ' |
| 300 | ( |
| 301 | run_sub_test_lib_test git-skip-tests-several \ |
| 302 | --skip="git.[2-5]" && |
| 303 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 304 | > ok 1 - passing test #1 |
| 305 | > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) |
| 306 | > ok 3 # skip passing test #3 (GIT_SKIP_TESTS) |
| 307 | > ok 4 # skip passing test #4 (GIT_SKIP_TESTS) |
| 308 | > ok 5 # skip passing test #5 (GIT_SKIP_TESTS) |
| 309 | > ok 6 - passing test #6 |
| 310 | > # passed all 6 test(s) |
| 311 | > 1..6 |
| 312 | EOF |
| 313 | ) |
| 314 | ' |
| 315 | |
| 316 | test_expect_success 'subtest: skip entire test suite with GIT_SKIP_TESTS' ' |
| 317 | ( |
| 318 | GIT_SKIP_TESTS="git" && export GIT_SKIP_TESTS && |
| 319 | run_sub_test_lib_test git-skip-tests-several \ |
| 320 | --skip="git" && |
| 321 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 322 | > 1..0 # SKIP skip all tests in git |
| 323 | EOF |
| 324 | ) |
| 325 | ' |
| 326 | |
| 327 | test_expect_success 'subtest: GIT_SKIP_TESTS does not skip unmatched suite' ' |
| 328 | ( |
| 329 | GIT_SKIP_TESTS="notgit" && export GIT_SKIP_TESTS && |
| 330 | run_sub_test_lib_test full-pass \ |
| 331 | --skip="notfull" && |
| 332 | check_sub_test_lib_test full-pass <<-\EOF |
| 333 | > ok 1 - passing test #1 |
| 334 | > ok 2 - passing test #2 |
| 335 | > ok 3 - passing test #3 |
| 336 | > # passed all 3 test(s) |
| 337 | > 1..3 |
| 338 | EOF |
| 339 | ) |
| 340 | ' |
| 341 | |
| 342 | test_expect_success 'subtest: --run basic' ' |
| 343 | run_sub_test_lib_test git-skip-tests-several --run="1,3,5" && |
| 344 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 345 | > ok 1 - passing test #1 |
| 346 | > ok 2 # skip passing test #2 (--run) |
| 347 | > ok 3 - passing test #3 |
| 348 | > ok 4 # skip passing test #4 (--run) |
| 349 | > ok 5 - passing test #5 |
| 350 | > ok 6 # skip passing test #6 (--run) |
| 351 | > # passed all 6 test(s) |
| 352 | > 1..6 |
| 353 | EOF |
| 354 | ' |
| 355 | |
| 356 | test_expect_success 'subtest: --run with a range' ' |
| 357 | run_sub_test_lib_test git-skip-tests-several \ |
| 358 | --run="1-3" && |
| 359 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 360 | > ok 1 - passing test #1 |
| 361 | > ok 2 - passing test #2 |
| 362 | > ok 3 - passing test #3 |
| 363 | > ok 4 # skip passing test #4 (--run) |
| 364 | > ok 5 # skip passing test #5 (--run) |
| 365 | > ok 6 # skip passing test #6 (--run) |
| 366 | > # passed all 6 test(s) |
| 367 | > 1..6 |
| 368 | EOF |
| 369 | ' |
| 370 | |
| 371 | test_expect_success 'subtest: --run with two ranges' ' |
| 372 | run_sub_test_lib_test git-skip-tests-several \ |
| 373 | --run="1-2,5-6" && |
| 374 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 375 | > ok 1 - passing test #1 |
| 376 | > ok 2 - passing test #2 |
| 377 | > ok 3 # skip passing test #3 (--run) |
| 378 | > ok 4 # skip passing test #4 (--run) |
| 379 | > ok 5 - passing test #5 |
| 380 | > ok 6 - passing test #6 |
| 381 | > # passed all 6 test(s) |
| 382 | > 1..6 |
| 383 | EOF |
| 384 | ' |
| 385 | |
| 386 | test_expect_success 'subtest: --run with a left open range' ' |
| 387 | run_sub_test_lib_test git-skip-tests-several \ |
| 388 | --run="-3" && |
| 389 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 390 | > ok 1 - passing test #1 |
| 391 | > ok 2 - passing test #2 |
| 392 | > ok 3 - passing test #3 |
| 393 | > ok 4 # skip passing test #4 (--run) |
| 394 | > ok 5 # skip passing test #5 (--run) |
| 395 | > ok 6 # skip passing test #6 (--run) |
| 396 | > # passed all 6 test(s) |
| 397 | > 1..6 |
| 398 | EOF |
| 399 | ' |
| 400 | |
| 401 | test_expect_success 'subtest: --run with a right open range' ' |
| 402 | run_sub_test_lib_test git-skip-tests-several \ |
| 403 | --run="4-" && |
| 404 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 405 | > ok 1 # skip passing test #1 (--run) |
| 406 | > ok 2 # skip passing test #2 (--run) |
| 407 | > ok 3 # skip passing test #3 (--run) |
| 408 | > ok 4 - passing test #4 |
| 409 | > ok 5 - passing test #5 |
| 410 | > ok 6 - passing test #6 |
| 411 | > # passed all 6 test(s) |
| 412 | > 1..6 |
| 413 | EOF |
| 414 | ' |
| 415 | |
| 416 | test_expect_success 'subtest: --run with basic negation' ' |
| 417 | run_sub_test_lib_test git-skip-tests-several \ |
| 418 | --run="!3" && |
| 419 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 420 | > ok 1 - passing test #1 |
| 421 | > ok 2 - passing test #2 |
| 422 | > ok 3 # skip passing test #3 (--run) |
| 423 | > ok 4 - passing test #4 |
| 424 | > ok 5 - passing test #5 |
| 425 | > ok 6 - passing test #6 |
| 426 | > # passed all 6 test(s) |
| 427 | > 1..6 |
| 428 | EOF |
| 429 | ' |
| 430 | |
| 431 | test_expect_success 'subtest: --run with two negations' ' |
| 432 | run_sub_test_lib_test git-skip-tests-several \ |
| 433 | --run="!3,!6" && |
| 434 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 435 | > ok 1 - passing test #1 |
| 436 | > ok 2 - passing test #2 |
| 437 | > ok 3 # skip passing test #3 (--run) |
| 438 | > ok 4 - passing test #4 |
| 439 | > ok 5 - passing test #5 |
| 440 | > ok 6 # skip passing test #6 (--run) |
| 441 | > # passed all 6 test(s) |
| 442 | > 1..6 |
| 443 | EOF |
| 444 | ' |
| 445 | |
| 446 | test_expect_success 'subtest: --run a range and negation' ' |
| 447 | run_sub_test_lib_test git-skip-tests-several \ |
| 448 | --run="-4,!2" && |
| 449 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 450 | > ok 1 - passing test #1 |
| 451 | > ok 2 # skip passing test #2 (--run) |
| 452 | > ok 3 - passing test #3 |
| 453 | > ok 4 - passing test #4 |
| 454 | > ok 5 # skip passing test #5 (--run) |
| 455 | > ok 6 # skip passing test #6 (--run) |
| 456 | > # passed all 6 test(s) |
| 457 | > 1..6 |
| 458 | EOF |
| 459 | ' |
| 460 | |
| 461 | test_expect_success 'subtest: --run range negation' ' |
| 462 | run_sub_test_lib_test git-skip-tests-several \ |
| 463 | --run="!1-3" && |
| 464 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 465 | > ok 1 # skip passing test #1 (--run) |
| 466 | > ok 2 # skip passing test #2 (--run) |
| 467 | > ok 3 # skip passing test #3 (--run) |
| 468 | > ok 4 - passing test #4 |
| 469 | > ok 5 - passing test #5 |
| 470 | > ok 6 - passing test #6 |
| 471 | > # passed all 6 test(s) |
| 472 | > 1..6 |
| 473 | EOF |
| 474 | ' |
| 475 | |
| 476 | test_expect_success 'subtest: --run include, exclude and include' ' |
| 477 | run_sub_test_lib_test git-skip-tests-several \ |
| 478 | --run="1-5,!1-3,2" && |
| 479 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 480 | > ok 1 # skip passing test #1 (--run) |
| 481 | > ok 2 - passing test #2 |
| 482 | > ok 3 # skip passing test #3 (--run) |
| 483 | > ok 4 - passing test #4 |
| 484 | > ok 5 - passing test #5 |
| 485 | > ok 6 # skip passing test #6 (--run) |
| 486 | > # passed all 6 test(s) |
| 487 | > 1..6 |
| 488 | EOF |
| 489 | ' |
| 490 | |
| 491 | test_expect_success 'subtest: --run include, exclude and include, comma separated' ' |
| 492 | run_sub_test_lib_test git-skip-tests-several \ |
| 493 | --run=1-5,!1-3,2 && |
| 494 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 495 | > ok 1 # skip passing test #1 (--run) |
| 496 | > ok 2 - passing test #2 |
| 497 | > ok 3 # skip passing test #3 (--run) |
| 498 | > ok 4 - passing test #4 |
| 499 | > ok 5 - passing test #5 |
| 500 | > ok 6 # skip passing test #6 (--run) |
| 501 | > # passed all 6 test(s) |
| 502 | > 1..6 |
| 503 | EOF |
| 504 | ' |
| 505 | |
| 506 | test_expect_success 'subtest: --run exclude and include' ' |
| 507 | run_sub_test_lib_test git-skip-tests-several \ |
| 508 | --run="!3-,5" && |
| 509 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 510 | > ok 1 - passing test #1 |
| 511 | > ok 2 - passing test #2 |
| 512 | > ok 3 # skip passing test #3 (--run) |
| 513 | > ok 4 # skip passing test #4 (--run) |
| 514 | > ok 5 - passing test #5 |
| 515 | > ok 6 # skip passing test #6 (--run) |
| 516 | > # passed all 6 test(s) |
| 517 | > 1..6 |
| 518 | EOF |
| 519 | ' |
| 520 | |
| 521 | test_expect_success 'subtest: --run empty selectors' ' |
| 522 | run_sub_test_lib_test git-skip-tests-several \ |
| 523 | --run="1,,3,,,5" && |
| 524 | check_sub_test_lib_test git-skip-tests-several <<-\EOF |
| 525 | > ok 1 - passing test #1 |
| 526 | > ok 2 # skip passing test #2 (--run) |
| 527 | > ok 3 - passing test #3 |
| 528 | > ok 4 # skip passing test #4 (--run) |
| 529 | > ok 5 - passing test #5 |
| 530 | > ok 6 # skip passing test #6 (--run) |
| 531 | > # passed all 6 test(s) |
| 532 | > 1..6 |
| 533 | EOF |
| 534 | ' |
| 535 | |
| 536 | test_expect_success 'subtest: --run substring selector' ' |
| 537 | write_and_run_sub_test_lib_test run-substring-selector \ |
| 538 | --run="relevant" <<-\EOF && |
| 539 | test_expect_success "relevant test" "true" |
| 540 | for i in 1 2 3 4 5 6 |
| 541 | do |
| 542 | test_expect_success "other test #$i" "true" |
| 543 | done |
| 544 | test_done |
| 545 | EOF |
| 546 | check_sub_test_lib_test run-substring-selector <<-\EOF |
| 547 | > ok 1 - relevant test |
| 548 | > ok 2 # skip other test #1 (--run) |
| 549 | > ok 3 # skip other test #2 (--run) |
| 550 | > ok 4 # skip other test #3 (--run) |
| 551 | > ok 5 # skip other test #4 (--run) |
| 552 | > ok 6 # skip other test #5 (--run) |
| 553 | > ok 7 # skip other test #6 (--run) |
| 554 | > # passed all 7 test(s) |
| 555 | > 1..7 |
| 556 | EOF |
| 557 | ' |
| 558 | |
| 559 | test_expect_success 'subtest: --run keyword selection' ' |
| 560 | write_and_run_sub_test_lib_test_err run-inv-range-start \ |
| 561 | --run="a-5" <<-\EOF && |
| 562 | test_expect_success "passing test #1" "true" |
| 563 | test_done |
| 564 | EOF |
| 565 | check_sub_test_lib_test_err run-inv-range-start \ |
| 566 | <<-\EOF_OUT 3<<-EOF_ERR |
| 567 | > FATAL: Unexpected exit with code 1 |
| 568 | EOF_OUT |
| 569 | > error: --run: invalid non-numeric in range start: ${SQ}a-5${SQ} |
| 570 | EOF_ERR |
| 571 | ' |
| 572 | |
| 573 | test_expect_success 'subtest: --run invalid range end' ' |
| 574 | run_sub_test_lib_test_err run-inv-range-start \ |
| 575 | --run="1-z" && |
| 576 | check_sub_test_lib_test_err run-inv-range-start \ |
| 577 | <<-\EOF_OUT 3<<-EOF_ERR |
| 578 | > FATAL: Unexpected exit with code 1 |
| 579 | EOF_OUT |
| 580 | > error: --run: invalid non-numeric in range end: ${SQ}1-z${SQ} |
| 581 | EOF_ERR |
| 582 | ' |
| 583 | |
| 584 | test_expect_success 'subtest: --invert-exit-code without --immediate' ' |
| 585 | run_sub_test_lib_test_err full-pass \ |
| 586 | --invert-exit-code && |
| 587 | check_sub_test_lib_test_err full-pass \ |
| 588 | <<-\EOF_OUT 3<<-EOF_ERR |
| 589 | ok 1 - passing test #1 |
| 590 | ok 2 - passing test #2 |
| 591 | ok 3 - passing test #3 |
| 592 | # passed all 3 test(s) |
| 593 | 1..3 |
| 594 | # faking up non-zero exit with --invert-exit-code |
| 595 | EOF_OUT |
| 596 | EOF_ERR |
| 597 | ' |
| 598 | |
| 599 | test_expect_success 'subtest: --invert-exit-code with --immediate: all passed' ' |
| 600 | run_sub_test_lib_test_err full-pass \ |
| 601 | --invert-exit-code --immediate && |
| 602 | check_sub_test_lib_test_err full-pass \ |
| 603 | <<-\EOF_OUT 3<<-EOF_ERR |
| 604 | ok 1 - passing test #1 |
| 605 | ok 2 - passing test #2 |
| 606 | ok 3 - passing test #3 |
| 607 | # passed all 3 test(s) |
| 608 | 1..3 |
| 609 | # faking up non-zero exit with --invert-exit-code |
| 610 | EOF_OUT |
| 611 | EOF_ERR |
| 612 | ' |
| 613 | |
| 614 | test_expect_success 'subtest: --invert-exit-code without --immediate: partial pass' ' |
| 615 | run_sub_test_lib_test partial-pass \ |
| 616 | --invert-exit-code && |
| 617 | check_sub_test_lib_test partial-pass <<-\EOF |
| 618 | ok 1 - passing test #1 |
| 619 | not ok 2 - # TODO induced breakage (--invert-exit-code): failing test #2 |
| 620 | # false |
| 621 | ok 3 - passing test #3 |
| 622 | # failed 1 among 3 test(s) |
| 623 | 1..3 |
| 624 | # faked up failures as TODO & now exiting with 0 due to --invert-exit-code |
| 625 | EOF |
| 626 | ' |
| 627 | |
| 628 | test_expect_success 'subtest: --invert-exit-code with --immediate: partial pass' ' |
| 629 | run_sub_test_lib_test partial-pass \ |
| 630 | --invert-exit-code --immediate && |
| 631 | check_sub_test_lib_test partial-pass \ |
| 632 | <<-\EOF_OUT 3<<-EOF_ERR |
| 633 | ok 1 - passing test #1 |
| 634 | not ok 2 - # TODO induced breakage (--invert-exit-code): failing test #2 |
| 635 | # false |
| 636 | 1..2 |
| 637 | # faked up failures as TODO & now exiting with 0 due to --invert-exit-code |
| 638 | EOF_OUT |
| 639 | EOF_ERR |
| 640 | ' |
| 641 | |
| 642 | test_expect_success 'subtest: --invert-exit-code --immediate: got a failure' ' |
| 643 | run_sub_test_lib_test partial-pass \ |
| 644 | --invert-exit-code --immediate && |
| 645 | check_sub_test_lib_test_err partial-pass \ |
| 646 | <<-\EOF_OUT 3<<-EOF_ERR |
| 647 | ok 1 - passing test #1 |
| 648 | not ok 2 - # TODO induced breakage (--invert-exit-code): failing test #2 |
| 649 | # false |
| 650 | 1..2 |
| 651 | # faked up failures as TODO & now exiting with 0 due to --invert-exit-code |
| 652 | EOF_OUT |
| 653 | EOF_ERR |
| 654 | ' |
| 655 | |
| 656 | test_expect_success 'subtest: tests respect prerequisites' ' |
| 657 | write_and_run_sub_test_lib_test prereqs <<-\EOF && |
| 658 | |
| 659 | test_set_prereq HAVEIT |
| 660 | test_expect_success HAVEIT "prereq is satisfied" "true" |
| 661 | test_expect_success "have_prereq works" " |
| 662 | test_have_prereq HAVEIT |
| 663 | " |
| 664 | test_expect_success DONTHAVEIT "prereq not satisfied" "false" |
| 665 | |
| 666 | test_set_prereq HAVETHIS |
| 667 | test_expect_success HAVETHIS,HAVEIT "multiple prereqs" "true" |
| 668 | test_expect_success HAVEIT,DONTHAVEIT "mixed prereqs (yes,no)" "false" |
| 669 | test_expect_success DONTHAVEIT,HAVEIT "mixed prereqs (no,yes)" "false" |
| 670 | |
| 671 | test_done |
| 672 | EOF |
| 673 | |
| 674 | check_sub_test_lib_test prereqs <<-\EOF |
| 675 | ok 1 - prereq is satisfied |
| 676 | ok 2 - have_prereq works |
| 677 | ok 3 # skip prereq not satisfied (missing DONTHAVEIT) |
| 678 | ok 4 - multiple prereqs |
| 679 | ok 5 # skip mixed prereqs (yes,no) (missing DONTHAVEIT of HAVEIT,DONTHAVEIT) |
| 680 | ok 6 # skip mixed prereqs (no,yes) (missing DONTHAVEIT of DONTHAVEIT,HAVEIT) |
| 681 | # passed all 6 test(s) |
| 682 | 1..6 |
| 683 | EOF |
| 684 | ' |
| 685 | |
| 686 | test_expect_success 'subtest: tests respect lazy prerequisites' ' |
| 687 | write_and_run_sub_test_lib_test lazy-prereqs <<-\EOF && |
| 688 | |
| 689 | test_lazy_prereq LAZY_TRUE true |
| 690 | test_expect_success LAZY_TRUE "lazy prereq is satisfied" "true" |
| 691 | test_expect_success !LAZY_TRUE "negative lazy prereq" "false" |
| 692 | |
| 693 | test_lazy_prereq LAZY_FALSE false |
| 694 | test_expect_success LAZY_FALSE "lazy prereq not satisfied" "false" |
| 695 | test_expect_success !LAZY_FALSE "negative false prereq" "true" |
| 696 | |
| 697 | test_done |
| 698 | EOF |
| 699 | |
| 700 | check_sub_test_lib_test lazy-prereqs <<-\EOF |
| 701 | ok 1 - lazy prereq is satisfied |
| 702 | ok 2 # skip negative lazy prereq (missing !LAZY_TRUE) |
| 703 | ok 3 # skip lazy prereq not satisfied (missing LAZY_FALSE) |
| 704 | ok 4 - negative false prereq |
| 705 | # passed all 4 test(s) |
| 706 | 1..4 |
| 707 | EOF |
| 708 | ' |
| 709 | |
| 710 | test_expect_success 'subtest: nested lazy prerequisites' ' |
| 711 | write_and_run_sub_test_lib_test nested-lazy <<-\EOF && |
| 712 | |
| 713 | test_lazy_prereq NESTED_INNER " |
| 714 | >inner && |
| 715 | rm -f outer |
| 716 | " |
| 717 | test_lazy_prereq NESTED_PREREQ " |
| 718 | >outer && |
| 719 | test_have_prereq NESTED_INNER && |
| 720 | echo can create new file in cwd >file && |
| 721 | test_path_is_file outer && |
| 722 | test_path_is_missing inner |
| 723 | " |
| 724 | test_expect_success NESTED_PREREQ "evaluate nested prereq" "true" |
| 725 | |
| 726 | test_done |
| 727 | EOF |
| 728 | |
| 729 | check_sub_test_lib_test nested-lazy <<-\EOF |
| 730 | ok 1 - evaluate nested prereq |
| 731 | # passed all 1 test(s) |
| 732 | 1..1 |
| 733 | EOF |
| 734 | ' |
| 735 | |
| 736 | test_expect_success 'subtest: lazy prereqs do not turn off tracing' ' |
| 737 | write_and_run_sub_test_lib_test lazy-prereq-and-tracing \ |
| 738 | -v -x <<-\EOF && |
| 739 | test_lazy_prereq LAZY true |
| 740 | |
| 741 | test_expect_success lazy "test_have_prereq LAZY && echo trace" |
| 742 | |
| 743 | test_done |
| 744 | EOF |
| 745 | |
| 746 | grep "echo trace" lazy-prereq-and-tracing/err |
| 747 | ' |
| 748 | |
| 749 | test_expect_success 'subtest: tests clean up after themselves' ' |
| 750 | write_and_run_sub_test_lib_test cleanup <<-\EOF && |
| 751 | clean=no |
| 752 | test_expect_success "do cleanup" " |
| 753 | test_when_finished clean=yes |
| 754 | " |
| 755 | test_expect_success "cleanup happened" " |
| 756 | test $clean = yes |
| 757 | " |
| 758 | test_done |
| 759 | EOF |
| 760 | |
| 761 | check_sub_test_lib_test cleanup <<-\EOF |
| 762 | ok 1 - do cleanup |
| 763 | ok 2 - cleanup happened |
| 764 | # passed all 2 test(s) |
| 765 | 1..2 |
| 766 | EOF |
| 767 | ' |
| 768 | |
| 769 | test_expect_success 'subtest: tests clean up even on failures' ' |
| 770 | write_and_run_sub_test_lib_test_err \ |
| 771 | failing-cleanup <<-\EOF && |
| 772 | test_expect_success "tests clean up even after a failure" " |
| 773 | touch clean-after-failure && |
| 774 | test_when_finished rm clean-after-failure && |
| 775 | (exit 1) |
| 776 | " |
| 777 | test_expect_success "failure to clean up causes the test to fail" " |
| 778 | test_when_finished \"(exit 2)\" |
| 779 | " |
| 780 | test_done |
| 781 | EOF |
| 782 | check_sub_test_lib_test failing-cleanup <<-\EOF |
| 783 | > not ok 1 - tests clean up even after a failure |
| 784 | > # Z |
| 785 | > # touch clean-after-failure && |
| 786 | > # test_when_finished rm clean-after-failure && |
| 787 | > # (exit 1) |
| 788 | > # Z |
| 789 | > not ok 2 - failure to clean up causes the test to fail |
| 790 | > # Z |
| 791 | > # test_when_finished "(exit 2)" |
| 792 | > # Z |
| 793 | > # failed 2 among 2 test(s) |
| 794 | > 1..2 |
| 795 | EOF |
| 796 | ' |
| 797 | |
| 798 | test_expect_success 'subtest: test_atexit is run' ' |
| 799 | write_and_run_sub_test_lib_test_err \ |
| 800 | atexit-cleanup -i <<-\EOF && |
| 801 | test_expect_success "tests clean up even after a failure" " |
| 802 | > ../../clean-atexit && |
| 803 | test_atexit rm ../../clean-atexit && |
| 804 | > ../../also-clean-atexit && |
| 805 | test_atexit rm ../../also-clean-atexit && |
| 806 | > ../../dont-clean-atexit && |
| 807 | (exit 1) |
| 808 | " |
| 809 | test_done |
| 810 | EOF |
| 811 | test_path_is_file dont-clean-atexit && |
| 812 | test_path_is_missing clean-atexit && |
| 813 | test_path_is_missing also-clean-atexit |
| 814 | ' |
| 815 | |
| 816 | test_expect_success 'test_oid provides sane info by default' ' |
| 817 | test_oid zero >actual && |
| 818 | grep "^00*\$" actual && |
| 819 | rawsz="$(test_oid rawsz)" && |
| 820 | hexsz="$(test_oid hexsz)" && |
| 821 | # +1 accounts for the trailing newline |
| 822 | test $(( $hexsz + 1)) -eq $(wc -c <actual) && |
| 823 | test $(( $rawsz * 2)) -eq "$hexsz" |
| 824 | ' |
| 825 | |
| 826 | test_expect_success 'test_oid can look up data for SHA-1' ' |
| 827 | test_when_finished "test_detect_hash" && |
| 828 | test_set_hash sha1 && |
| 829 | test_oid zero >actual && |
| 830 | grep "^00*\$" actual && |
| 831 | rawsz="$(test_oid rawsz)" && |
| 832 | hexsz="$(test_oid hexsz)" && |
| 833 | test $(wc -c <actual) -eq 41 && |
| 834 | test "$rawsz" -eq 20 && |
| 835 | test "$hexsz" -eq 40 |
| 836 | ' |
| 837 | |
| 838 | test_expect_success 'test_oid can look up data for SHA-256' ' |
| 839 | test_when_finished "test_detect_hash" && |
| 840 | test_set_hash sha256 && |
| 841 | test_oid zero >actual && |
| 842 | grep "^00*\$" actual && |
| 843 | rawsz="$(test_oid rawsz)" && |
| 844 | hexsz="$(test_oid hexsz)" && |
| 845 | test $(wc -c <actual) -eq 65 && |
| 846 | test "$rawsz" -eq 32 && |
| 847 | test "$hexsz" -eq 64 |
| 848 | ' |
| 849 | |
| 850 | test_expect_success 'test_oid can look up data for a specified algorithm' ' |
| 851 | rawsz="$(test_oid --hash=sha1 rawsz)" && |
| 852 | hexsz="$(test_oid --hash=sha1 hexsz)" && |
| 853 | test "$rawsz" -eq 20 && |
| 854 | test "$hexsz" -eq 40 && |
| 855 | rawsz="$(test_oid --hash=sha256 rawsz)" && |
| 856 | hexsz="$(test_oid --hash=sha256 hexsz)" && |
| 857 | test "$rawsz" -eq 32 && |
| 858 | test "$hexsz" -eq 64 |
| 859 | ' |
| 860 | |
| 861 | test_expect_success 'test_bool_env' ' |
| 862 | ( |
| 863 | sane_unset envvar && |
| 864 | |
| 865 | test_bool_env envvar true && |
| 866 | ! test_bool_env envvar false && |
| 867 | |
| 868 | envvar= && |
| 869 | export envvar && |
| 870 | ! test_bool_env envvar true && |
| 871 | ! test_bool_env envvar false && |
| 872 | |
| 873 | envvar=true && |
| 874 | test_bool_env envvar true && |
| 875 | test_bool_env envvar false && |
| 876 | |
| 877 | envvar=false && |
| 878 | ! test_bool_env envvar true && |
| 879 | ! test_bool_env envvar false && |
| 880 | |
| 881 | envvar=invalid && |
| 882 | # When encountering an invalid bool value, test_bool_env |
| 883 | # prints its error message to the original stderr of the |
| 884 | # test script, hence the redirection of fd 7, and aborts |
| 885 | # with "exit 1", hence the subshell. |
| 886 | ! ( test_bool_env envvar true ) 7>err && |
| 887 | grep "error: test_bool_env requires bool values" err && |
| 888 | |
| 889 | envvar=true && |
| 890 | ! ( test_bool_env envvar invalid ) 7>err && |
| 891 | grep "error: test_bool_env requires bool values" err |
| 892 | ) |
| 893 | ' |
| 894 | |
| 895 | ################################################################ |
| 896 | # Basics of the basics |
| 897 | |
| 898 | test_oid_cache <<\EOF |
| 899 | path0f sha1:f87290f8eb2cbbea7857214459a0739927eab154 |
| 900 | path0f sha256:638106af7c38be056f3212cbd7ac65bc1bac74f420ca5a436ff006a9d025d17d |
| 901 | |
| 902 | path0s sha1:15a98433ae33114b085f3eb3bb03b832b3180a01 |
| 903 | path0s sha256:3a24cc53cf68edddac490bbf94a418a52932130541361f685df685e41dd6c363 |
| 904 | |
| 905 | path2f sha1:3feff949ed00a62d9f7af97c15cd8a30595e7ac7 |
| 906 | path2f sha256:2a7f36571c6fdbaf0e3f62751a0b25a3f4c54d2d1137b3f4af9cb794bb498e5f |
| 907 | |
| 908 | path2s sha1:d8ce161addc5173867a3c3c730924388daedbc38 |
| 909 | path2s sha256:18fd611b787c2e938ddcc248fabe4d66a150f9364763e9ec133dd01d5bb7c65a |
| 910 | |
| 911 | path2d sha1:58a09c23e2ca152193f2786e06986b7b6712bdbe |
| 912 | path2d sha256:00e4b32b96e7e3d65d79112dcbea53238a22715f896933a62b811377e2650c17 |
| 913 | |
| 914 | path3f sha1:0aa34cae68d0878578ad119c86ca2b5ed5b28376 |
| 915 | path3f sha256:09f58616b951bd571b8cb9dc76d372fbb09ab99db2393f5ab3189d26c45099ad |
| 916 | |
| 917 | path3s sha1:8599103969b43aff7e430efea79ca4636466794f |
| 918 | path3s sha256:fce1aed087c053306f3f74c32c1a838c662bbc4551a7ac2420f5d6eb061374d0 |
| 919 | |
| 920 | path3d sha1:21ae8269cacbe57ae09138dcc3a2887f904d02b3 |
| 921 | path3d sha256:9b60497be959cb830bf3f0dc82bcc9ad9e925a24e480837ade46b2295e47efe1 |
| 922 | |
| 923 | subp3f sha1:00fb5908cb97c2564a9783c0c64087333b3b464f |
| 924 | subp3f sha256:a1a9e16998c988453f18313d10375ee1d0ddefe757e710dcae0d66aa1e0c58b3 |
| 925 | |
| 926 | subp3s sha1:6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c |
| 927 | subp3s sha256:81759d9f5e93c6546ecfcadb560c1ff057314b09f93fe8ec06e2d8610d34ef10 |
| 928 | |
| 929 | subp3d sha1:3c5e5399f3a333eddecce7a9b9465b63f65f51e2 |
| 930 | subp3d sha256:76b4ef482d4fa1c754390344cf3851c7f883b27cf9bc999c6547928c46aeafb7 |
| 931 | |
| 932 | root sha1:087704a96baf1c2d1c869a8b084481e121c88b5b |
| 933 | root sha256:9481b52abab1b2ffeedbf9de63ce422b929f179c1b98ff7bee5f8f1bc0710751 |
| 934 | |
| 935 | simpletree sha1:7bb943559a305bdd6bdee2cef6e5df2413c3d30a |
| 936 | simpletree sha256:1710c07a6c86f9a3c7376364df04c47ee39e5a5e221fcdd84b743bc9bb7e2bc5 |
| 937 | EOF |
| 938 | |
| 939 | # updating a new file without --add should fail. |
| 940 | test_expect_success 'git update-index without --add should fail adding' ' |
| 941 | test_must_fail git update-index should-be-empty |
| 942 | ' |
| 943 | |
| 944 | # and with --add it should succeed, even if it is empty (it used to fail). |
| 945 | test_expect_success 'git update-index with --add should succeed' ' |
| 946 | git update-index --add should-be-empty |
| 947 | ' |
| 948 | |
| 949 | test_expect_success 'writing tree out with git write-tree' ' |
| 950 | tree=$(git write-tree) |
| 951 | ' |
| 952 | |
| 953 | # we know the shape and contents of the tree and know the object ID for it. |
| 954 | test_expect_success 'validate object ID of a known tree' ' |
| 955 | test "$tree" = "$(test_oid simpletree)" |
| 956 | ' |
| 957 | |
| 958 | # Removing paths. |
| 959 | test_expect_success 'git update-index without --remove should fail removing' ' |
| 960 | rm -f should-be-empty full-of-directories && |
| 961 | test_must_fail git update-index should-be-empty |
| 962 | ' |
| 963 | |
| 964 | test_expect_success 'git update-index with --remove should be able to remove' ' |
| 965 | git update-index --remove should-be-empty |
| 966 | ' |
| 967 | |
| 968 | # Empty tree can be written with recent write-tree. |
| 969 | test_expect_success 'git write-tree should be able to write an empty tree' ' |
| 970 | tree=$(git write-tree) |
| 971 | ' |
| 972 | |
| 973 | test_expect_success 'validate object ID of a known tree' ' |
| 974 | test "$tree" = $EMPTY_TREE |
| 975 | ' |
| 976 | |
| 977 | # Various types of objects |
| 978 | |
| 979 | test_expect_success 'adding various types of objects with git update-index --add' ' |
| 980 | mkdir path2 path3 path3/subp3 && |
| 981 | paths="path0 path2/file2 path3/file3 path3/subp3/file3" && |
| 982 | ( |
| 983 | for p in $paths |
| 984 | do |
| 985 | echo "hello $p" >$p || exit 1 |
| 986 | test_ln_s_add "hello $p" ${p}sym || exit 1 |
| 987 | done |
| 988 | ) && |
| 989 | find path* ! -type d -print | xargs git update-index --add |
| 990 | ' |
| 991 | |
| 992 | # Show them and see that matches what we expect. |
| 993 | test_expect_success 'showing stage with git ls-files --stage' ' |
| 994 | git ls-files --stage >current |
| 995 | ' |
| 996 | |
| 997 | test_expect_success 'validate git ls-files output for a known tree' ' |
| 998 | cat >expected <<-EOF && |
| 999 | 100644 $(test_oid path0f) 0 path0 |
| 1000 | 120000 $(test_oid path0s) 0 path0sym |
| 1001 | 100644 $(test_oid path2f) 0 path2/file2 |
| 1002 | 120000 $(test_oid path2s) 0 path2/file2sym |
| 1003 | 100644 $(test_oid path3f) 0 path3/file3 |
| 1004 | 120000 $(test_oid path3s) 0 path3/file3sym |
| 1005 | 100644 $(test_oid subp3f) 0 path3/subp3/file3 |
| 1006 | 120000 $(test_oid subp3s) 0 path3/subp3/file3sym |
| 1007 | EOF |
| 1008 | test_cmp expected current |
| 1009 | ' |
| 1010 | |
| 1011 | test_expect_success 'writing tree out with git write-tree' ' |
| 1012 | tree=$(git write-tree) |
| 1013 | ' |
| 1014 | |
| 1015 | test_expect_success 'validate object ID for a known tree' ' |
| 1016 | test "$tree" = "$(test_oid root)" |
| 1017 | ' |
| 1018 | |
| 1019 | test_expect_success 'showing tree with git ls-tree' ' |
| 1020 | git ls-tree $tree >current |
| 1021 | ' |
| 1022 | |
| 1023 | test_expect_success 'git ls-tree output for a known tree' ' |
| 1024 | cat >expected <<-EOF && |
| 1025 | 100644 blob $(test_oid path0f) path0 |
| 1026 | 120000 blob $(test_oid path0s) path0sym |
| 1027 | 040000 tree $(test_oid path2d) path2 |
| 1028 | 040000 tree $(test_oid path3d) path3 |
| 1029 | EOF |
| 1030 | test_cmp expected current |
| 1031 | ' |
| 1032 | |
| 1033 | # This changed in ls-tree pathspec change -- recursive does |
| 1034 | # not show tree nodes anymore. |
| 1035 | test_expect_success 'showing tree with git ls-tree -r' ' |
| 1036 | git ls-tree -r $tree >current |
| 1037 | ' |
| 1038 | |
| 1039 | test_expect_success 'git ls-tree -r output for a known tree' ' |
| 1040 | cat >expected <<-EOF && |
| 1041 | 100644 blob $(test_oid path0f) path0 |
| 1042 | 120000 blob $(test_oid path0s) path0sym |
| 1043 | 100644 blob $(test_oid path2f) path2/file2 |
| 1044 | 120000 blob $(test_oid path2s) path2/file2sym |
| 1045 | 100644 blob $(test_oid path3f) path3/file3 |
| 1046 | 120000 blob $(test_oid path3s) path3/file3sym |
| 1047 | 100644 blob $(test_oid subp3f) path3/subp3/file3 |
| 1048 | 120000 blob $(test_oid subp3s) path3/subp3/file3sym |
| 1049 | EOF |
| 1050 | test_cmp expected current |
| 1051 | ' |
| 1052 | |
| 1053 | # But with -r -t we can have both. |
| 1054 | test_expect_success 'showing tree with git ls-tree -r -t' ' |
| 1055 | git ls-tree -r -t $tree >current |
| 1056 | ' |
| 1057 | |
| 1058 | test_expect_success 'git ls-tree -r output for a known tree' ' |
| 1059 | cat >expected <<-EOF && |
| 1060 | 100644 blob $(test_oid path0f) path0 |
| 1061 | 120000 blob $(test_oid path0s) path0sym |
| 1062 | 040000 tree $(test_oid path2d) path2 |
| 1063 | 100644 blob $(test_oid path2f) path2/file2 |
| 1064 | 120000 blob $(test_oid path2s) path2/file2sym |
| 1065 | 040000 tree $(test_oid path3d) path3 |
| 1066 | 100644 blob $(test_oid path3f) path3/file3 |
| 1067 | 120000 blob $(test_oid path3s) path3/file3sym |
| 1068 | 040000 tree $(test_oid subp3d) path3/subp3 |
| 1069 | 100644 blob $(test_oid subp3f) path3/subp3/file3 |
| 1070 | 120000 blob $(test_oid subp3s) path3/subp3/file3sym |
| 1071 | EOF |
| 1072 | test_cmp expected current |
| 1073 | ' |
| 1074 | |
| 1075 | test_expect_success 'writing partial tree out with git write-tree --prefix' ' |
| 1076 | ptree=$(git write-tree --prefix=path3) |
| 1077 | ' |
| 1078 | |
| 1079 | test_expect_success 'validate object ID for a known tree' ' |
| 1080 | test "$ptree" = $(test_oid path3d) |
| 1081 | ' |
| 1082 | |
| 1083 | test_expect_success 'writing partial tree out with git write-tree --prefix' ' |
| 1084 | ptree=$(git write-tree --prefix=path3/subp3) |
| 1085 | ' |
| 1086 | |
| 1087 | test_expect_success 'validate object ID for a known tree' ' |
| 1088 | test "$ptree" = $(test_oid subp3d) |
| 1089 | ' |
| 1090 | |
| 1091 | test_expect_success 'put invalid objects into the index' ' |
| 1092 | rm -f .git/index && |
| 1093 | suffix=$(echo $ZERO_OID | sed -e "s/^.//") && |
| 1094 | cat >badobjects <<-EOF && |
| 1095 | 100644 blob $(test_oid 001) dir/file1 |
| 1096 | 100644 blob $(test_oid 002) dir/file2 |
| 1097 | 100644 blob $(test_oid 003) dir/file3 |
| 1098 | 100644 blob $(test_oid 004) dir/file4 |
| 1099 | 100644 blob $(test_oid 005) dir/file5 |
| 1100 | EOF |
| 1101 | git update-index --index-info <badobjects |
| 1102 | ' |
| 1103 | |
| 1104 | test_expect_success 'writing this tree without --missing-ok' ' |
| 1105 | test_must_fail git write-tree |
| 1106 | ' |
| 1107 | |
| 1108 | test_expect_success 'writing this tree with --missing-ok' ' |
| 1109 | git write-tree --missing-ok |
| 1110 | ' |
| 1111 | |
| 1112 | |
| 1113 | ################################################################ |
| 1114 | test_expect_success 'git read-tree followed by write-tree should be idempotent' ' |
| 1115 | rm -f .git/index && |
| 1116 | git read-tree $tree && |
| 1117 | test_path_is_file .git/index && |
| 1118 | newtree=$(git write-tree) && |
| 1119 | test "$newtree" = "$tree" |
| 1120 | ' |
| 1121 | |
| 1122 | test_expect_success 'validate git diff-files output for a know cache/work tree state' ' |
| 1123 | cat >expected <<EOF && |
| 1124 | :100644 100644 $(test_oid path0f) $ZERO_OID M path0 |
| 1125 | :120000 120000 $(test_oid path0s) $ZERO_OID M path0sym |
| 1126 | :100644 100644 $(test_oid path2f) $ZERO_OID M path2/file2 |
| 1127 | :120000 120000 $(test_oid path2s) $ZERO_OID M path2/file2sym |
| 1128 | :100644 100644 $(test_oid path3f) $ZERO_OID M path3/file3 |
| 1129 | :120000 120000 $(test_oid path3s) $ZERO_OID M path3/file3sym |
| 1130 | :100644 100644 $(test_oid subp3f) $ZERO_OID M path3/subp3/file3 |
| 1131 | :120000 120000 $(test_oid subp3s) $ZERO_OID M path3/subp3/file3sym |
| 1132 | EOF |
| 1133 | git diff-files >current && |
| 1134 | test_cmp expected current |
| 1135 | ' |
| 1136 | |
| 1137 | test_expect_success 'git update-index --refresh should succeed' ' |
| 1138 | git update-index --refresh |
| 1139 | ' |
| 1140 | |
| 1141 | test_expect_success 'no diff after checkout and git update-index --refresh' ' |
| 1142 | git diff-files >current && |
| 1143 | cmp -s current /dev/null |
| 1144 | ' |
| 1145 | |
| 1146 | ################################################################ |
| 1147 | P=$(test_oid root) |
| 1148 | |
| 1149 | test_expect_success 'git commit-tree records the correct tree in a commit' ' |
| 1150 | commit0=$(echo NO | git commit-tree $P) && |
| 1151 | git show --pretty=raw $commit0 >out && |
| 1152 | tree=$(sed -n -e "s/^tree //p" -e "/^author /q" out) && |
| 1153 | test "z$tree" = "z$P" |
| 1154 | ' |
| 1155 | |
| 1156 | test_expect_success 'git commit-tree records the correct parent in a commit' ' |
| 1157 | commit1=$(echo NO | git commit-tree $P -p $commit0) && |
| 1158 | git show --pretty=raw $commit1 >out && |
| 1159 | parent=$(sed -n -e "s/^parent //p" -e "/^author /q" out) && |
| 1160 | test "z$commit0" = "z$parent" |
| 1161 | ' |
| 1162 | |
| 1163 | test_expect_success 'git commit-tree omits duplicated parent in a commit' ' |
| 1164 | commit2=$(echo NO | git commit-tree $P -p $commit0 -p $commit0) && |
| 1165 | git show --pretty=raw $commit2 >out && |
| 1166 | cat >match.sed <<-\EOF && |
| 1167 | s/^parent //p |
| 1168 | /^author /q |
| 1169 | EOF |
| 1170 | parent=$(sed -n -f match.sed out | sort -u) && |
| 1171 | test "z$commit0" = "z$parent" && |
| 1172 | git show --pretty=raw $commit2 >out && |
| 1173 | test_stdout_line_count = 1 sed -n -f match.sed out |
| 1174 | ' |
| 1175 | |
| 1176 | test_expect_success 'update-index D/F conflict' ' |
| 1177 | mv path0 tmp && |
| 1178 | mv path2 path0 && |
| 1179 | mv tmp path2 && |
| 1180 | git update-index --add --replace path2 path0/file2 && |
| 1181 | git ls-files path0 >tmp && |
| 1182 | numpath0=$(wc -l <tmp) && |
| 1183 | test $numpath0 = 1 |
| 1184 | ' |
| 1185 | |
| 1186 | test_expect_success 'very long name in the index handled sanely' ' |
| 1187 | |
| 1188 | a=a && # 1 |
| 1189 | a=$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a && # 16 |
| 1190 | a=$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a && # 256 |
| 1191 | a=$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a && # 4096 |
| 1192 | a=${a}q && |
| 1193 | |
| 1194 | >path4 && |
| 1195 | git update-index --add path4 && |
| 1196 | git ls-files -s path4 >tmp && |
| 1197 | ( |
| 1198 | sed -e "s/ .*/ /" tmp | |
| 1199 | tr -d "\012" && |
| 1200 | echo "$a" |
| 1201 | ) | git update-index --index-info && |
| 1202 | git ls-files "a*" >tmp && |
| 1203 | len=$(wc -c <tmp) && |
| 1204 | test $len = 4098 |
| 1205 | ' |
| 1206 | |
| 1207 | # D/F conflict checking uses an optimization when adding to the end. |
| 1208 | # make sure it does not get confused by `a-` sorting _between_ |
| 1209 | # `a` and `a/`. |
| 1210 | test_expect_success 'more update-index D/F conflicts' ' |
| 1211 | # empty the index to make sure our entry is last |
| 1212 | git read-tree --empty && |
| 1213 | cacheinfo=100644,$(test_oid empty_blob) && |
| 1214 | git update-index --add --cacheinfo $cacheinfo,path5/a && |
| 1215 | |
| 1216 | test_must_fail git update-index --add --cacheinfo $cacheinfo,path5/a/file && |
| 1217 | test_must_fail git update-index --add --cacheinfo $cacheinfo,path5/a/b/file && |
| 1218 | test_must_fail git update-index --add --cacheinfo $cacheinfo,path5/a/b/c/file && |
| 1219 | |
| 1220 | # "a-" sorts between "a" and "a/" |
| 1221 | git update-index --add --cacheinfo $cacheinfo,path5/a- && |
| 1222 | |
| 1223 | test_must_fail git update-index --add --cacheinfo $cacheinfo,path5/a/file && |
| 1224 | test_must_fail git update-index --add --cacheinfo $cacheinfo,path5/a/b/file && |
| 1225 | test_must_fail git update-index --add --cacheinfo $cacheinfo,path5/a/b/c/file && |
| 1226 | |
| 1227 | cat >expected <<-\EOF && |
| 1228 | path5/a |
| 1229 | path5/a- |
| 1230 | EOF |
| 1231 | git ls-files >actual && |
| 1232 | test_cmp expected actual |
| 1233 | ' |
| 1234 | |
| 1235 | test_expect_success 'test_must_fail on a failing git command' ' |
| 1236 | test_must_fail git notacommand |
| 1237 | ' |
| 1238 | |
| 1239 | test_expect_success 'test_must_fail on a failing git command with env' ' |
| 1240 | test_must_fail env var1=a var2=b git notacommand |
| 1241 | ' |
| 1242 | |
| 1243 | test_expect_success 'test_must_fail rejects a non-git command' ' |
| 1244 | ! test_must_fail grep ^$ notafile 2>err && |
| 1245 | grep -F "test_must_fail: only '"'"'git'"'"' is allowed" err |
| 1246 | ' |
| 1247 | |
| 1248 | test_expect_success 'test_must_fail rejects a non-git command with env' ' |
| 1249 | ! test_must_fail env var1=a var2=b grep ^$ notafile 2>err && |
| 1250 | grep -F "test_must_fail: only '"'"'git'"'"' is allowed" err |
| 1251 | ' |
| 1252 | |
| 1253 | test_done |